The α- to β-Si3N4 transformation in the presence of liquid silicon

The compacts consisted of , -Si₃N₄ and free silicon are heat treated in the range 1650° C to 1750° C in an argon atmosphere in order to observe the following behaviours; the to phase transformation and variations of the microstructure during heat treatment in silicon nitride. For the microstructural observation of the heat treated specimens, the same grains in the polished surface were investigated before and after eliminating the retained silicon by etching. The to phase transformation, in this case, occurs via silicon melts irrespective of added -Si₃N₄. Both and phases are soluted and precipitated into molten silicon and their morphology are changed from an equiaxed shape to prismatic one. Although elongated grains are precipitated at low temperature or in the early stage of heat treatment, fine precipitated grains are mainly observed with increasing heat treating temperature.     

保持边缘特征和增强对比度的图像缩放算法

图像的边缘信息和对比度是影响人体视觉的最主要因素。提出一种能够同时保持边缘特征和增强对比度的图像缩放新方法。通过边缘检测算法、边缘梯度增强以及梯度图的低通滤波算法,得到新的梯度图,再通过求解泊松方程得到重建的图像。由于对图像边缘作了特殊处理,从而避免在图像缩放过程中丢失边缘信息。该方法可以同时保持特征以及增加图像的对比度,从而更好地展现图像的细节。实验结果表明,本文方法能应用于一般图像和医学图像的缩放和增强等应用中。     

基于单幅图像景深和大气散射模型的去雾方法

为恢复雾天图像对比度和颜色,更好地提取图像中的信息,根据海上开阔海域的特点,利用3维到2维透视投影模型,推导了海上图像任意像素点景深的计算公式,并结合暗原色先验知识,有效解决基准景深点的选取和天空亮度的选取问题,最后基于相对景深模型和大气散射模型,对单幅雾天图像进行清晰化处理。通过大量雾天降质图像的实验验证,该算法的去雾效果优于基于暗原色先验统计方法的效果。     

应用信息技术提高小学语文教学效率

随着小学实施新课程标准的速度越来越快,农村小学语文教学理念必须更新,教学方法与教学手段也必须与时俱进。充分使用现在学校的有利数字化条件,提高课堂效率,不断激发学生学习兴趣;努力创设精彩的教学情境,以提高学生学习积极性;同事还应充分挖掘信息教育技术内在优势,来提高学生的创新能力;我们广大教师对信息技术不仅要合理利用,还要创新运用,把信息技术优势与传统教学手段优点有机结合,进行优化组合,在教学实践中,不断探索新的教育教学手段,提高小学语文教学效率。     

基于HCPN的发电企业项目管理工作流建模

如何对工程项目的成本、进度、质量情况进行控制和跟踪是发电企业的重要问题,应用工作流可通过对业务流程的整合及资源的合理分配解决这一问题。本文基于分层着色Petri网(HCPN),将工作流过程模型的逻辑结构和语义与HCPN中的网结构进行映射,进而利用CPN-TOOLS定义基于HCPN的项目管理工作流过程模型,并利用化简原则对工作流模型进行畅通性验证。     

Ionization of Porous Hypercrosslinked Polymers for Catalyzing Room-Temperature CO2 Reduction via Formamides Synthesis

Catalysis Letters - Porous materials with heterogeneous nature occupy a pivotal position in the chemical industry. This work described a facile pre- and post-synthetic approach to modify porous...     

Thermal cross-linking and anti-meltdrop properties of copolyester containing phosphorus/magnesium salt composites by in situ polymerization

Polyester is widely used in household products because of its good mechanical properties and wears resistance, but polyester is easy to ignite and inclined to produce droplet, so its application range is limited. The cross-linkable magnesium hydroxide nanoparticles were incorporated into flame-retardant polyester, which enables the phosphorus-containing copolyester with thermal cross-linking and anti-meltdrop properties. The nanoparticles were achieved by in situ polymerization and acted as a nucleating agent for improving the crystalline properties of the copolyester. Furthermore, the nanoparticles also enhanced anti-meltdrop properties and reduced the heat and gas release during the combustion process of the copolyester. The maximum heat release rate and total smoke release reduced by 39.8% and 74.4% compared with pure polyester. Specifically, the combustion products of the nanoparticles and phosphorus flame retardant could act a barrier role by covering the carbon layer to isolate air and heat, thereby resulting in excellent anti-meltdrop properties. The simple modification method reported here realizes the collaborative modification of flame retardant and anti-meltdrop properties of phosphorous flame-retardant copolyesters by thermal cross-linking.     

关于超耐候性BA01—02钛白粉的研制

采用高温淬火方法制备了Ｔｃ在２７．４Ｋ至９２．４Ｋ之间的一组不同氧含量的ＰＭＰ（粉末熔融工艺）法ＹＢＣＯ超导体。通过对这些超导体样品的磁滞回线及不可逆线的研究发现，随着氧空位的增加，超导体的磁通钉扎力减小