秋季太湖叶绿素a浓度荧光反演研究

基于2007年11~12月太湖全湖实测水质参数和光谱数据,首先利用高斯方程对遥感反射率进行过滤分解,找出叶绿素a(chl\|a)吸收峰675 nm以后的荧光反射峰(Fluorescence Peak:FP),再以662 nm处的反射率为基准,采用归一化荧光高度法进行叶绿素a浓度(C chl-a)反演,得到chl-a反演模型。基于高斯分解获取的chl-a的荧光反射峰值R(FP)与662 nm处的反射率R (662)比值［R(FP)/R(662)］与C chl-a之间存在显著的相关性,该模型为秋季太湖水体C chl-a的最佳反演模型。在高悬浮泥沙条件下,该模型能够较好地表示出叶绿素荧光高度与叶绿素浓度之间的关系,为C chl-a反演提供新的方法和依据,并为传感器敏感波段的选取和设置提供参考。     

聚乙烯醇存在下耐尔蓝－铈钼、钪钼杂多酸体系连续光度测定铈和钪

在聚乙烯醇（ＰＶＡ）存在下，耐尔蓝（ＮＢ）与铈钼、钪钼杂多酸络阴离子形成离子缔合物，其最大吸收均位于５８５ｎｍ，表观摩尔吸光度分别为εｃｗ＝３．５２×１０６和εＳｃ＝３．５９×１０＿５Ｌ·ｍｏｌˉ１·ｃｍˉ１，铈和钪服从比耳定律的浓度范围分别为０～０．８μｇ／２５ｍｌ和０～２．０μｇ／２５ｍｌ，测定极限分别为１．３ｎｇＣｅ／ｍｌ（ｎ＝１０）和３．０ｎｇＳｃ／ｍｌ（ｎ＝７），对于０．０２μｇＣｅ／ｍｌ或０．０４μｇＳｃ／ｍｌ测定的相对标准偏差分别为２．７％（ｎ＝９）和２．８％（ｎ＝１０），离子缔合物的摩尔比分别为Ｃｅ：Ｍｏ：ＮＢ＝１：６：４和Ｓｃ：Ｍｏ：ＮＢ＝１：１２：３。本法用于地质标样分析，结果满意。     

Thermal and crystallization characteristics of poly(ethylene terephthalate) with poly(oxybenzoate‐p‐trimethylene terephthalate) copolymer

Poly(ethylene terephthalate) (PET) was blended with two different poly(oxybenzoate‐p‐trimethylene terephthalate) copolymers, designated T28 and T64, with the level of copolymer varying from 1 to 15 wt %. All samples were prepared by solution blending in a 60/40 (by weight) phenol/tetrachloroethane solvent at 50°C. The crystallization behavior of the samples was studied by DSC. The results indicate that both T28 and T64 accelerated the crystallization rate of PET in a manner similar to that of a nucleating agent. The acceleration of PET crystallization rate was most pronounced in the PET/T64 blends with a maximum level at 5 wt % of T64. The melting temperatures for the blends are comparable to that of pure PET. The observed changes in crystallization behavior are explained by the effect of the physical state of the copolyester during PET crystallization as well as the amount of copolymer in the blends. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1599–1606, 2002     

Morphology and properties of poly(vinyl chloride)–polyurethane blends

The objective of this research was to study the morphology and properties of PVC–polyurethane blends. Studies on blends of a segmented polyether polyurethane with PVC were carried out utilizing differential scanning calorimetry, Rheovibron, stress–strain, infrared peak position studies, and infrared dichroism experiments. This thermodynamically incompatible system was made kinetically compatible by precipitation from tetrahydrofuran (THF) solutions. THF–dioxane solution casting and melt processing produced an incompatible system. The compatible polyurethane–PVC system contains a well-mixed PVC–polyether matrix phase as evidenced by T_g shifts, orientation characteristics, and infrared peak position changes. The aromatic urethane segments which exhibit microphase separation in the pure polyurethane are not solubilized by blending with PVC by any of sample preparation methods used in this study.     

Synthesis and Morphology of TiO2 Nanotube Arrays by Anodic Oxidation Using Modified Glycerol-Based Electrolytes

Titanium dioxide (TiO₂) nanotube arrays were prepared by electrochemical anodization of titanium sheets in the glycerol 176 mL/H₂O 44 mL/NH₄F 0.5 wt% electrolytes modified with H₂SO₄ and NaAc addition. The surface morphologies, average inner diameter, and the length of the nanotube arrays changed with the solution pH in the range from 5.6 to 4.0 by adding H₂SO₄. A uniform surface morphology of the nanotubes with average inner diameter of ∼80 nm and a length of ∼1000 nm was obtained when the solution pH was 5.0. The growth rates of the nanotubes were remarkably enhanced by NaAc addition in the range of 0.04–0.14 M . With NaAc addition of 0.10 M , the length of the nanotube arrays reached 4.16 μm after an 8-h anodization, increasing 3.23 μm compared with no NaAc addition. The relationship between solution pH and growth of TiO₂ nanotubes was analyzed by current–time curves, solution electrical conductivities, and scanning electron microscopy (SEM), and the role of NaAc was also discussed based on SEM and solution electrical conductivities.     

设置进程检查点的嵌入式容错系统设计

针对嵌入式Linux系统的特点,通过设置检查点(checkpoint)实现ARM平台进程级容错。在检查点工作时,通过/proc文件系统与内核进行交互,实时地获取与进程有关的PID、CPU状态以及内存信息,并保存在存储介质中。当进程出现故障后,将上述与进程有关的状态信息进行恢复,从而实现进程级容错。实验表明,该进程级容错系统有较好的容错能力,极大地缩短了进程恢复的时间。     

采用JFM7201的北斗基带数字接收通道设计

北斗卫星导航定位系统是我国自行研制的,它采用直接序列扩频技术,只有当扩频码完全同步之后才能解调出信息码。因此,对于扩频码的捕获和跟踪就成为一个非常重要的环节,基带信号处理就可实现这样的功能。JFM7201芯片是一款基带信号处理芯片,与相关的处理器配合,可以实现信号的捕获、跟踪、解调以及输出位置、速度和时间的相关信息,是北斗接收机一种比较好的实现方式。     

基于STM32的步行者航位推算装置设计

基于便携性与实用性考虑,提出一种新的步行者航位推算装置设计。使用三维加速度计与电子罗盘集成芯片LSM303DLHC和陀螺仪集成芯片MPU3050对步行者的实时运动信息进行采集,采用具有ARM Cortex-M3内核的STM32F103RBT6单片机收集传感器数据并对数据进行航位推算处理,将步行者航迹信息显示于TFTLCD上。实验证明,该装置具有较高的推算精度,能满足实际应用需求。     

基于STM32F407和OV7670的低端视频监控系统

本系统采用了意法半导体公司的STM32F407微处理器作为核心,以OV7670作为监控系统的视频采集传感器,并将传感器采集的数据通过DMA控制器成功地发送至液晶模块(SSD1289)显示。该系统运行流畅,为低端视频监控系统提供了一种新的解决方案。     

ZigBee和3G的远程无线测光系统设计

设计了基于ZigBee短距离无线通信技术与3G远距离无线通信技术相结合的远程无线测光系统;该系统处理器选用的是三星S5PV210处理器,短距离无线通信模块采用TI公司的CC2530芯片,3G上网卡设备用的是中兴MF190无线上网模块。文中给出了系统具体的软硬件设计方案。结果表明,该系统可以达到稳定高效的监测效果,具有良好的实用性和应用价值。