PAN/FPU Composite Nanofiber Membrane with Superhydrophobic and Superoleophobic Surface as a Filter Element for High-Efficiency Protective Masks

Recently, because of the outbreak of COVID-19, the demand for various types of filter elements in protective materials has increased globally. Furthermore, new requirements for the filtration performance of PM2.5 liquid (oil) particles have been put forward. In this work, Superhydrophobic and superoleophobic composite nanofibers with excellent filtration capacity for oil and salt particles are developed through the modification of polyacrylonitrile (PAN) by fluoro-polyurethane (FPU) doping. The results show that the PAN/FPU composite nanofibers doped with 9 wt% FPU has a uniform fiber morphology with a diameter of 240 ± 30 nm. Compared to the pure PAN nanofibers, the water-based contact angle of PAN/FPU increases from 90 ± 5° to 151 ± 5°, and the oil-based contact angle increases from 58 ± 2° to 152 ± 3°. Importantly, at a high flow rate of 95 L min⁻¹, the filtration efficiency of the PAN/FPU nanofiber membrane for 0.3 µm oil particles increases from 92 ± 1% to 99.2 ± 0.1%. After cyclic loading, the filtration efficiency of 0.3 µm oil particles remains above 98%. Meanwhile, the filtration efficiency for 0.3 µm salt particles remains at 98.23 ± 0.1%. The PAN/FPU nanofiber membrane developed in this work is effective in applications and has good market prospects as a protective filtration material.     

粉煤灰高附加值利用研究进展

粉煤灰是火电厂燃煤过程中产生的固体残渣, 其成分复杂, 具有毒性, 若处理不当会对环境造成危害。因此, 粉煤灰的高附加值利用迫在眉睫。然而, 粉煤灰的品质是制约其高附加值利用的主要因素。目前, 中国粉煤灰品质参差不齐, 缺少完善的品质评价体系, 由此造成粉煤灰利用领域的局限性。针对上述问题, 首先分析了中国粉煤灰的资源化特性, 总结了粉煤灰的品质评价方法, 并重点阐述了适用于粉煤灰高附加值利用的品质评价方法;其次, 详细介绍了粉煤灰高附加值利用技术（高附加值提取技术、高附加值材料制备技术）;最后, 对粉煤灰高附加值利用的发展趋势做出了展望。     

CHARAC TERIZATION OF TiAl POWDER PRODUCED BY MECHANICAL ALLOYING

The microstructure,alloying reaction and sintering behavior of the powder produced by Mechanical Al-loying(MA)for 8 h from 64 wt.-% Ti powder and 36 wt.-% Al powder were studied by scanning electronmicroscopy,optical microscopy,X-ray diffractometry,differential scanning calorimetry(DSC)and dilatometry.The mechanically alloyed powder partictes are Ti-Al composite particles.Thus,titanium aluminides can formeasily in the powder through diffusion during heat treatment.It is shown that the sintering behavior of this pow-der,different from the behaviors of TiAl alloy powder and mixed powder of 64 wt.-% Ti powder and 36 wt.-%Al powder,changes from expansion at temperatures below 1000℃ to shrinkage at temperatures above 1000℃.Homogeneously alloyed TiAl material with a density over 96% of the theoretical density can be produced fromthe mechanically alloyed powder by compaction-sintering.     

高功率锂离子电池研究进展

高功率快放型锂离子电池是目前锂离子电池领域研究的重点方向之一。为了获得具有高功率密度的锂离子电池,正极材料须具有较高的电压和较高的电子与离子导电率,正极材料主要包括高电压钴酸锂、镍锰酸锂和高电压三元材料,负极材料包括碳系材料、钛基材料和金属氧化物材料,以及为提高首效和降低负极电位而采用的预嵌锂方法,并对锂离子电池电解液用锂盐、溶剂和添加剂进行了综述。最终总结了功率密度测试方法,并对高功率锂离子电池的研究进行展望。      

青海某微细粒浸染型难处理金矿石工艺矿物学研究

采用显微镜、X射线衍射仪、化学分析等多种手段,对青海某金矿石进行了工艺矿物学研究,查明矿石中矿物组成、主要矿物嵌布状态、嵌布粒度等。结果表明：矿石中主要有价元素为金,伴生低品位银,金品位4.20 g/t、银品位<2.0 g/t、碳品位1.17%、硫品位1.92%,属微细粒—超微细粒浸染型高碳低硫极难处理金矿石;金主要以微细粒、超微细粒包裹于毒砂和黄铁矿中,部分以单体金形式嵌布于脉石矿物中;毒砂、黄铁矿嵌布粒度较粗,硫化矿物包裹金可通过初步磨矿达到回收效果,脉石矿物中金则需要进一步磨矿进行回收。     

基于地质勘查技术的矿山环境地质灾害预防探析

中国矿产资源总量庞大,很多矿产资源开采难度较高,勘查和解决好矿山环境地质灾害,是从业人员面临的难题之一。简述了利用地质勘查技术勘查矿山环境地质灾害的重要性,分析了典型矿山环境地质灾害类型,介绍了先进地质勘查技术,并给出了相关技术支撑下的矿山环境地质灾害预防对策,以提升矿山资源开采安全性。     

低压铸造三维温度场的冷却边界条件处理

低压铸造模具结构比较复杂，存在多处冷却系统对模具进行强制冷却。对低压铸造的多种类型的界面根据其换热的特点作了大致分类。针对每种情况，考虑了冷却介质和冷却管道的个性参数，建立了相应的计算模型，并编制计算程序对实际铸件进行了模拟计算。     

3Cr2W8V钢锻件表面裂纹的成因及预防措施

通过对难变形钢3Cr2W8V进行实验,证明了合理地选择锻造工艺参数,也是解决表面裂纹的重要途径之一。     

近2年我国锆铪及锆化学制品雕生产、贸易及研发概况

介绍了我国近2年来海绵锆、锆铪制品和锆化学品的生产、进出口概况,以及重要研发进展。我国工业级海绵锆产量从2003年的100t增加到2005年的174t,2005年的销售量达到150t;锆粉与锆-铝消气剂等年产量在10t左右;锆材和锆设备年产量在100t以上;锆化学制品品种有10余种,年产量已达到20×104t。锆砂的沸腾氯化工艺、锆铪的MIBK法分离工艺、以电熔ZrO2为原料制取粗ZrCl2工艺和Al-Y复合ZrO2粉的生产工艺等的研发工作,都取得了突破性进展。     

冬季CO2水玻璃砂促硬防蠕变技术

介绍了使用一种专用改性荆加入普通水玻璃中，使CO2水玻璃砂在低温环境下也能速硬，可防止铸型（芯）蠕变的技术。