PAN/FPU Composite Nanofiber Membrane with Superhydrophobic and Superoleophobic Surface as a Filter Element for High-Efficiency Protective Masks

Recently, because of the outbreak of COVID-19, the demand for various types of filter elements in protective materials has increased globally. Furthermore, new requirements for the filtration performance of PM2.5 liquid (oil) particles have been put forward. In this work, Superhydrophobic and superoleophobic composite nanofibers with excellent filtration capacity for oil and salt particles are developed through the modification of polyacrylonitrile (PAN) by fluoro-polyurethane (FPU) doping. The results show that the PAN/FPU composite nanofibers doped with 9 wt% FPU has a uniform fiber morphology with a diameter of 240 ± 30 nm. Compared to the pure PAN nanofibers, the water-based contact angle of PAN/FPU increases from 90 ± 5° to 151 ± 5°, and the oil-based contact angle increases from 58 ± 2° to 152 ± 3°. Importantly, at a high flow rate of 95 L min⁻¹, the filtration efficiency of the PAN/FPU nanofiber membrane for 0.3 µm oil particles increases from 92 ± 1% to 99.2 ± 0.1%. After cyclic loading, the filtration efficiency of 0.3 µm oil particles remains above 98%. Meanwhile, the filtration efficiency for 0.3 µm salt particles remains at 98.23 ± 0.1%. The PAN/FPU nanofiber membrane developed in this work is effective in applications and has good market prospects as a protective filtration material.     

How the biaxially stretching mode influence dielectric and energy storage properties of polypropylene films

The most important polymer film used in commercial capacitors is biaxially oriented polypropylene (BOPP), which could be produced by sequentially or simultaneously biaxial orientation after the melt-extrusion. In order to disclose the influence of the stretching technique on the properties of films, the BOPP films with varied thickness were fabricated by sequential and simultaneous orientation, respectively. Compared to the sequentially biaxially stretched films, the crystal grains in the simultaneously biaxially stretched films are more isotropically dispersed. As temperature increases, all the BOPP films exhibit similar dielectric constant, and the simultaneous films have much lower dielectric loss thanks to the finer blended crystalline and amorphous phases. When the film thickness is smaller than 5 μm, the breakdown field strength, energy density and discharging time of the simultaneous films can be increased by at least 10% comparing to the sequential ones, which is very important for reducing the volume of the film capacitors. All the results suggest the simultaneously biaxial orientation mode shows significant advantages in producing thin BOPP films with better mechanical and electrical properties.     

一种缓蚀杀菌剂ZE-1的制备及性能评价

注水过程中,由于注入水组分复杂(存在SRB、矿化度高),易加剧金属腐蚀,减少金属设备的使用寿命.为了解决这一腐蚀问题,以己二醛、苯乙酮、有机胺为原料合成曼尼希碱,再通过氯化苄改性制备缓蚀杀菌剂ZE-1来抑制腐蚀反应.失重法分析结果表明:随着ZE-1质量浓度的增大,L80-1管线钢的腐蚀速率越小,ZE-1对L80-1的缓蚀效率大于80％,ZE-1具有良好的抗盐、抗温性能.电化学方法分析结果表明:ZE-1加入能有效抑制腐蚀反应,属于混合控制型缓蚀剂,ZE-1分子能有效吸附在L80-1表面,使其表面光滑,降低腐蚀速率.随着实验时间增长,ZE-1的杀菌率逐渐增高,可达100％,这表明缓蚀杀菌剂杀菌效率良好.     

喷气燃料微生物ATP荧光检测酶反应体系研究

荧光素酶反应体系是利用ATP生物荧光法检测喷气燃料微生物污染的关键.为了获得最佳的酶反应体系,本研究以ATP标准物质为研究对象,考察了荧光素酶、荧光素和Mg2+的最佳使用量.结果表明:荧光素酶、荧光素和Mg2+的最佳使用量依次为0.05 mg·mL-1、0.08 mg·mL-1和5 mmol·L-1.通过考察Mg2+与...     

Up-pulling force analysis for ESC hollow cylindrical casting

Electroslag casting(ESC)is an important method to produce high quality castings.In this study,the ESC up-pulling inner mold method(EUPIM)was used to produce hollow cylindrical castings with the multiple consumable electrodes.The radial deformation,the axial and radial internal stress of the inner mold,and the axial internal stress of the slag shell were analyzed using the finite element method(FEM)with the aid of ANSYS software.The ProCAST software was used to calculate the specific heat,heat conductivity and density curve of Cu.Simulation results show that the radial deformation,the axial and radial internal stress of the inner mold,and the axial internal stress of the slag shell near the slag-metal interface of hollow cylndrical casting gradually increase from 0 s to 360 s after the ESC starting(slagging)process but before applying the up-pulling force.The suitable initial up-pulling moment of the inner mold is at around 180-198 s after the starting process.     

Correlation between current and cross-sectional area of parallel fixed-movable dual electrodes in ESC

Electroslag casting with parallel fixed-movable dual electrodes is a new method for achieving better quality of castings in complex mold cavities. In this work, a mathematical model, y=kx~2+(k+1)x, was established to describe the ideal correlation between the current ratio(y) and the cross-sectional area ratio(x) of the dual electrodes, where k is the filling ratio. Investigation was conducted on the electroslag casting process with dual electrodes of various cross-sectional areas, but at a constant k value. The experimental results indicated that the ideal correlation was obtained at the stable casting stage, and the fitting results were consistent with the experimental results at certain k values. The experimental findings show that better castings can be obtained when the current ratio is greater than 1.536 and the cross-sectional area ratio is greater than 0.5.     

大规格圆棒用滚动导卫开度调节系统的改进

针对大规格圆棒生产用滚动导卫在轧制过程中导辊开度不能保持在设定值,影响产品质量及生产顺行的问题,通过对该类型导卫开度调节装置的工作原理及结构分析,明确了结构设计及选用材质与使用工况不匹配是问题产生的主要原因。为此,对调节装置进行了设计优化,改进后的导卫在线时间显著提高。     

高温合金切削刀具的研究现状及进展

高温合金具有较高的强度、抗高温氧化性等性能,被广泛应用于各种领域中,其加工时切削温度高、加工硬化严重、刀具磨损严重,是最难加工的材料之一。本文综述了国内外高温合金切削刀具的研究现状。阐述了高温合金的切削特性,重点对高速钢、硬质合金、涂层硬质合金、陶瓷、PCVB这几类高温合金切削刀具材料的研究现状进行了分析;同时,也对国内外切削高温合金刀具的结构、切削加工工艺参数以及磨损机理的研究现状进行了概述。在此基础上,发现高温合金切削刀具虽然已经研发设计出了多种新刀具材料、新切削工艺参数,但仍然需要进一步了解影响刀具性能的因素及刀具磨损机理。因此,本文提出了建立评估刀具使用性能体系和研发高性能的刀具材料是高温合金切削刀具的主要研究方向。     

基于聚三唑固化体系的ADN推进剂研究进展

综述了国内外聚三唑固化体系及基于其的二硝酰胺铵(ADN)推进剂应用研究情况,分析了聚三唑固化体系的优缺点,指出了基于聚三唑固化体系的ADN推进剂的应用研究方向.认为聚三唑固化体系具有反应条件温和、对水分不敏感、毒性低等优点,以及玻璃化转变温度偏高、力学性能偏低等缺点.在空间推进、洁净绿色推进以及低特征信号推进剂领域,基...     

CuO-SiO2气凝胶@TiO2纳米纤维无牺牲剂光催化还原CO2

采用溶胶-凝胶法制备CuO-SiO2复合气凝胶,通过在气凝胶孔道内填充TiCl4,然后将其气相水解,得到了在CuO-SiO2气凝胶表面生长了高结晶度的TiO2纳米纤维(CuO-SiO2@TiO2),纤维直径～16 nm.通过XPS、UPS、UV-Vis DRS、荧光光谱(PL)等表征了材料的结构及光电性能.结果表明,制备的CuO-SiO2@TiO2对可见光有明显吸收,且荧光强度较商用TiO2(P25)大幅降低,光生电子-空穴对更加稳定.再在纳米纤维上负载CuO,所得CuO-SiO2@TiO2/CuO在可见光区的荧光强度进一步增强.以300 W氙灯为光源,分别以CuO-SiO2@TiO2及CuO-SiO2@TiO2/CuO为催化剂,无牺牲剂条件下光催化还原CO2,4 h后甲醇产率分别为1304.0及1589.0μmol/g-cat,转换频率(TOF)分别为0.038及0.046 h–1.循环实验表明,纳米纤维具有较好的光催化稳定性,经过4次光催化循环实验后,CuO-SiO2@TiO2/CuO的保留率～94％,甲醇产率可达1472.0μmol/g-cat,TOF为0.042 h–1.