氯气处理系统的改进

介绍了为配合离子膜烧碱的扩产对氯气处理工序进行的技术改造内容，包括更新洗涤塔、降低系统阻力、更新筛板塔、提高氯压机泵头及改造氯压机出口缓冲罐等。通过改造，降低能耗和硫酸消耗，延长了设备的使用周期，取得了良好的经济效益。     

梯级水电站施工导流风险效益补偿机制研究

汛期通过上游已建水电站调蓄可保障下游施工电站的度汛安全。为有效均衡上下游风险,合理分摊合作利益,对梯级水电站施工导流风险效益进行了补偿机制的设计。以总效益可量化为前提,提出补偿是落实风险效益分摊的一种支付行为,分别从补偿主客体的界定、责权利的划分、风险效益计量、补偿实施方式、补偿管理流程设计等方面,构建了梯级水电开发条件下施工导流风险效益补偿框架和程序。针对补偿制度实施存在的难点,提出了相应的对策和建议,可为流域梯级水电站风险效益补偿管理模式和制度的构建提供参考。     

浅析加快300 MW机组启动速度的方法及措施

随着电网的装机容量日益增大,机组的启动次数也在逐日增多。从保证机组安全经济运行的角度出发,结合笔者直接或间接参与制定的技术措施,简要分析了影响机组启动速度的因素和改善措施,以期为其他发电厂在机组启动方面提供一些参考和建议。     

基于MAX+PLUSII模块化设计的智力竞赛抢答器

设计了一款造价低,体积小,操作简单,适用性广的抢答器。该抢答器是基于MAX+PLUSII软件,在FPGA芯片上设计的,可实现多人智力竞赛抢答。     

Effect of dynamic vulcanization on the microstructure and performance of polyethylene terephthalate/elastomer blends

Blends of polyethylene terephthalate (PET) and ethylene‐ethyl acrylate‐maleic anhydride terpolymer (E‐EA‐MAH) were dynamically crosslinked in a one‐step extrusion process. An amine‐terminated glycol reacting with MAH moieties was used as the crosslinking agent. The effect of blend composition and dynamic crosslinking on the microstructure and mechanical properties were investigated. Blend ratios ranging from 80:20 to 20:80 PET/E‐EA‐MAH were studied. The region of phase inversion was located for uncrosslinked and dynamically crosslinked blends. The rheological characterization was also carried out for these blends in comparison with the neat materials. After dynamic crosslinking, the phase inversion is shifted from the 30–40% range to the 70–80% range of elastomer content. This shift is induced by the increase of viscosity and elasticity of the network formed. Dynamically crosslinked blends show significant improvements in impact strength but also exhibit a decrease in elongation at break.     

入世后,景德镇陶瓷业面临的机遇、挑战以及对策

入世后,景德镇陶瓷业的发展取得了巨大的进步。但由于传统思想的约束,导向上的落后和管理的不适,使景德镇陶瓷业的发展始终不能和国际市场接轨。为了使景德镇陶瓷行业的发展在日益复杂的竞争中占有绝对优势,树立一个新的经济发展模式。本文从行业体制的改革、技术的创新、管理水平的提高、市场机制的完善等方面,提供了入世后在改善和增强景德镇陶瓷行业竞争力和促进行业不断发展的若干方面提出了一些可行性建议。     

Preparation of V doped lanthanum silicate electrolyte ceramics by combustion method and study on conductance mechanism

Vanadium doped La_9.33Si_6−xV_xO_26+0.5x (x = 0.5, 1.0, 1.5) (LSVO) electrolyte powder was prepared by combustion method at 600°C for 5-7 min. The powder was sintered at 1500°C for 3 hours to prepare LSVO ceramics. XPS, IR, XRD, and EIS analysis show that V⁵⁺ doping replaces Si⁴⁺ in [SiO₄] to form [Si(V)O₄] tetrahedron. With the increase in x, the lattice volume increase. When x = 2.0, the LaVO₄ phase was formed, indicating that the limit doping amount of V⁵⁺ replacing Si⁴⁺ is x ≤ 1.5. The conductivity of LSVO increases significantly with the increase in x (x ≤ 1.0), which attributed to the defect reaction caused by V⁵⁺ doping. The addition of the interstitial oxygen Oi* in 6₃ channels and the increase of lattice volume leads to increased conductivity. When x = 1.0, the highest conductivity is 1.46 × 10⁻² S·cm⁻¹ (800°C). The doping enhancement conductivity mechanism is the Interstitial oxygen defect-Lattice volume composite enhancement mechanism.     

OLAP中文本文件建模

在联机分析处理中,由于传统的模型无法对文本文件进行建模,因此提出了基于维概念的星系模型。该模型删除了事实的概念,消除了只能把事实作为分析主题的限制,令联机分析更加自由;而且引入了联系的概念,实现了对文本文件中的超链接进行建模。通过两种方法可以把星型模型中的事实转换成星系模型中的维,实现了星系模型与其他模型之间的转换。     

Safety evaluation and the static-dynamic coupling analysis of counter-arched slab in plunge pool

The stability of plunge pool slab of drainage structure is crucial to energy dissipation, but the working conditions of counter-arched slab are very complex and its stress procedure is considerably nonlinear and coupling. Therefore, a nonlinear static and dynamic coupling method to analyze the counter-arched slab configuration is put forward, which can reflect the coupling of dynamic loads, slab, anchor bars, groundwork and abutment as well as the dynamic procedure of instability. Various nonlinear factors and static-dynamic coupling are taken into consideration, and the working conditions, stress mechanism, dynamic instability procedure and influential instability factors are revealed. The proposed method thus provides a comprehensive safety evaluation method of plunge pool, which further provides an important theoretical basis for engineering design of counter-arched slab in plunge pool. Supported by the National Science Fund for Distinguished Young Scholars (Grant No. 50725929) and the National Natural Science Foundation of China (Grant Nos. 50539060, 50679052, 50779044)     

Flux pinning effect of cubic equiaxed morphology and its Ti stabilizing in Nb<Subscript>3</Subscript>Sn superconductors

Two sets of internal-Sn Nb3Sn superconducting strands were fabricated through RRP method, one with 2 wt% of Ti alloyed in Sn core and the other just pure Sn. Four reaction temperatures of 650℃, 675℃, 700℃ and 725℃ and 128 h duration were applied for A15 phase formation heat treatment after Cu-Sn alloying procedure of 210℃/50 h + 340℃/25 h. For the heat-treated coil samples, transport non-Cu JC was examined through standard 4-probe technique and phase microstructure was observed by means of Field Emission Sc...