基于ADS的低频电子元器件建模技术研究

针对国产元器件模型库缺乏的问题,在ADS软件的基础上,对不同低频电子元器件的建模方法进行了详细的介绍,重点阐述了元器件几种建模方法和具体实施步骤,并介绍了新建模型的封装和验证。该建模方法也可用于其他软件平台上的元器件建模。     

高职建筑结构课程教学与研究

根据高职水利类建筑结构的课程体系及特征,结合高等职业教育的特点,改革教学办法和手段,探讨培养学生实践能力和应用能力,提高学生创新素质,促进学生全面发展的教学模式.     

TiB2 Powders Synthesis by Borothermal Reduction in TiO2 Under Vacuum

TiB₂ powders were synthesized by borothermal reduction in nanoscale TiO₂ with boron under vacuum. Reaction processes were investigated, and the effect of by‐product B₂O₃ was evaluated. Results showed that TiO₂ was firstly reduced by boron to form TiBO₃ and Ti₂O₃, and then to produce TiB₂ and B₂O₃ with increasing temperature. The reaction processes of TiB₂ powders synthesis included two‐step reduction in TiO₂ by boron and the removal of B₂O₃. The presence of B₂O₃, which was previously reported as the most important factor in promoting the coarsening of ZrB₂ and HfB₂ powders by borothermal reduction, did not lead to significant coarsening of TiB₂ powders. Due to the minor effect of B₂O₃, TiB₂ powders with small particle size and low oxygen content could be prepared by direct heat treatment of TiO₂ and boron at 1550°C under vacuum for 1 h. The particle size and oxygen content of synthesized TiB₂ powders were ~0.9 μm and ~1.7 wt%, respectively.     

Sintering Behavior and Dielectric Properties of Ultra‐Low Temperature Fired Silver Molybdate Ceramics

Ag₂MoO₄ ceramic was prepared by using the solid‐state reaction method, which could be sintered at 450°C for 2 h, having a relative permittivity of 8.08, a Qf value of 17 000 GHz, and a temperature coefficient of resonance frequency about ?133 ppm/°C. Ag₂MoO₄ ceramic was chemically compatible with silver but reacted seriously with aluminum to form (Ag_0.5Al_0.5)MoO₄ during the sintering. The fitting of infrared spectra and the Shannon's additive rule were employed to study intrinsic dielectric behaviors of the ceramics at microwave region. Ionic displacive polarization and the electronic polarization contributed almost equally to the dielectric permittivity of the ceramic at microwave region. The Ag₂MoO₄ ceramics could be a good candidate for ultra‐low temperature co‐fired microwave devices.     

Rapid Bonding of Ti3SiC2 and Ti3AlC2 by Pulsed Electrical Current Heating

Inspired by pressure resistance welding of metallic materials, herein we describe how two MAX phases—Ti₃SiC₂ and Ti₃AlC₂—were successfully joined by a rapid electric current heating method in a pulsed electric current sintering furnace. No welding agent was employed and the total processing time was less than 6 min. When the bulk temperature of the joint couple exceeded 1070°C, good joints, with shear strength above 50 MPa, were achieved in both homo‐ and heterojunction joints.     

A New Ferroelectric Phase of YMnO3 Induced by Oxygen‐Vacancy Ordering

Manganese oxides are good candidates of strongly correlated electron materials due to the uniqueness of electronic structure of manganese and the mobility of oxygen among lattice sites under external impacts. Here, we used electron beam as the excitation source to explore the structural evolution of YMnO₃ and identified a new phase under the radiation of electron beam in the transmission electron microscope. Analyses of the electron energy‐loss spectra reveal that this phase originates from ordered oxygen vacancy. We applied the first principles calculation to pick out the optimized stable structure with a lower polarization, and verified its correctness by electron diffraction and image simulations. Analyses of density of states indicate that weak Y–O covalence is favorable for the existence of ferroelectricity, supporting the electrostatic nature of ferroelectricity in the YMnO₃.     

Rheology of natural fibers thermoplastic compounds: Flow length and fiber distribution

The presented study investigates the flow length and the corresponding fiber content distribution in the injection‐moulded natural fiber reinforced thermoplastics and its relation to fiber type and processing parameters such as injection pressure, temperature, injection rate and mould tempering by increasing die temperature. In this research, polypropylene compounds with nominally 30 wt % hemp and sisal fibers are investigated. The influence of the injection pressure (500 and 1000 bar), melt temperature (180°C, 200°C, and 220°C), and die temperature (23°C and 80°C) on the fiber content distribution all over the sample is investigated. An increasing linear trend of fiber content along the spiral length is observed as an evidence of a fiber/polymer multiflow system. A pattern for fiber content distribution with respect to the fiber length along the injected spiral can be distinguished, where the longer fibers are usually found at the end of the injected part and the shorter fibers remain near mould entrance point. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39861.     

Perfluorosulfonated ionomers membranes: Melt‐processing and characterization for ion exchange applications

Perflurosulfonated ionomers membranes with different ionic‐exchange capacity were successfully fabricated via melt‐extruding and casting of their –SO₂F precursors. A systematical investigation of the thermal stability, crystallinity, and rheological properties of the precursors was performed to secure their optimized processing conditions. The tensile properties of acid‐form membranes are found to increase with base‐hydrolysis time, where a tensile strength of 38.2 MPa is readily obtained after 24 h's base‐hydrolysis. The content of –SO₂F or –SO₃H containing side‐chains plays an important role in the thermal stability, rheological, and mechanical properties of the precursor or the acid‐form membranes. The strong ionic interactions, attributed to the –SO₃H groups, lead to decreased crystallinity and tensile strength for different IEC membranes. The acid‐form membranes exhibit good proton conductivity and low methanol crossover in comparison with reference Nafion membrane. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39944.     

Zein‐based ultrathin fibers containing ceramic nanofillers obtained by electrospinning. II. Mechanical properties,gas barrier,and sustained release capacity of biocide thymol in multilayer polylactide films

The combination of electrospinning technology and nanomaterials such as nanoclays can synergistically lead to novel materials with enhanced properties and functionalities for their usage in passive and active packaging applications. Part I of this work was focused on the development of ultrathin zein fibers containing nanoclays, which were oriented along the fiber axis and increased the thermal properties. Part II presents the use of the hybrid fibers as passive and active components in multilayer packaging structures. The hybrid fibers are incorporated in poly(lactic acid) films via a two‐step process: Electrospinning and compression molding. The composites thus produced presented improved mechanical and barrier properties than the unfilled material. The natural biocide extract thymol is then incorporated in the coating, and its sustained release properties are shown. The antimicrobial capacity of the hybrid fibers was also determined against foodborne bacteria. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40768.     

Social context cognition crowd‐sourcing and semi‐automatic parametrization

This paper presents a semi‐automatic method of parameterizing an existing social context cognition model. It discusses benefits of the social context cognition models for example in personality modeling and their key issue that is parametrization. It briefly introduces social context cognition model and describes a new method of its crowd‐sourcing‐based parametrization. Later, validation is provided, and ability to recreate social context cognition in the provided samples is presented with good generalization for the unknown cases. Finally, model's stability for the continuous stream of dynamic social context input data is shown. Presented system contributes to the believable agent modeling and social simulations by making much needed applications of social context cognition models easier by addressing the so far unsolved troublesome parametrization issues. Copyright © 2016 John Wiley & Sons, Ltd.