晶体硅薄膜电池制备技术及研究现状

晶体硅薄膜太阳电池近些年来得到广泛的研究和初步的商业化探索。根据所采用的晶体硅薄膜沉积工艺中温度范围的不同，晶体硅薄膜电池研究可分为高温路线和低温路线两个不同发展方向。本文分别从这两个方向综述了目前国外晶体硅薄膜电池制备技术的最新进展，最新实验室研究结果。报导了晶体硅薄膜电池商业化进展状况，指出了晶体硅薄膜电池实现产业化必须解决的问题。     

Ti-45Al-10Nb合金的高温氧化行为

研究了Ti—45A1—10Nb(原子分数，％)合金在800-960℃在氧气和空气中的氧化行为．结果表明，该合金具有较好的高温抗氧化性能，其氧化增重速率与铁基耐热不锈钢相似或略优．与Ti—50A1合金相反，Ti-45A1-10Nb合金在空气中的氧化增重速率明显低于在纯氧中的氧化增重速率．X射线衍射与能谱分析表明，Ti-45Al一10Nb合金在氧气中的氧化产物主要有TiO2和Al2O3，但在空气中的氧化产物中有TiN相．这是降低氧化速率的主要原因，同时，合金元素Nb稳定了氧化层中的TiN相，因而提高了合金在空气中的抗氧化性能．     

EPON媒体接入控制的关键技术研究

文章简要介绍了基于以及太网的无源光网络（EPON）这种新型的接入网技术，将其与基于ATM技术的无源光网络（APON）的优缺点进行了比较，并对其媒体接入控制（MAC）的关键技术测距及上行接入进行了讨论，初步提出了光网络单元（ONU）的软、硬件实现方案。     

纳米薄膜的分类、特性、制备方法与应用

介绍了纳米薄膜的分类以及纳米薄膜的光学、力学、电磁学与气敏特性;综述了现有的溶胶鄄凝胶法、LB鄄膜法、电化学沉积法、化学汽相沉积、低能团簇束沉积法、真空蒸发法、溅射沉积、分子与原子束外延、分子自组装等纳米薄膜制备技术;概括了纳米薄膜的应用。     

高入纤功率光纤通信系统的可靠性研究

掺铒光纤放大器(EDFA)和拉曼放大器(FRA)的使用,使得光纤通信系统中的入纤功率有了很大的提高.较高的入纤功率不仅会在光纤中引起各种非线性效应,对光脉冲的传输产生影响,也会对光纤本身的可靠性产生影响,为此介绍了高入纤功率对光纤系统的影响,分析了其产生的机理,并提出了应对措施.     

东方红浆砌石重力坝扬压力安全评价

东方红水库大坝是一座运行近40a的浆砌石重力坝，坝体裂缝、坝体渗漏及坝体碳化严重，扬压力有逐年增高的趋势。本文利用坝基扬压力测压管水位观测资料建立了测压管水位的统计模型，并结合现场渗漏实测流量资料建立了渗流反分析模型，详细分析了坝基的渗流性态和扬压力状态，并对其渗流性态做出安全评价。     

Sol-gel Preparation and Preliminary in vitro Evaluation of Fluorapatite／Hydroxyapatite Solid Solution Films

Fluorapatite/hydroxyapatite solid solution has better biological properties than other apatites, especially used as films or coatings. In this work, sol-gel preparation and in vitro behavior of fluorapatite/hydroxyapatite solid solution films on titanium alloy were investigated. Ca(NO3)2-4H20 and PO(OH)x(OEt)3-x were selected as precursors, and hexafluorophosphoric acid (HPFo) was used as a fluorine containing reagent. The Ca and P precursors were mixed with HPFo to keep the Ca/P molar ratio 1.67. The mixtures refluxed for 12 h were used as dipping sols for the preparation of the films. The phase of the films obtained at 600℃ was apatite. The F contents in the films increased with the concentrations of HPF6 in the dipping sols. The solid solution films were shown to have better stability than hydroxyapatite films, and a reasonably good bioactivity in the in vitro evaluation.     

空心微珠改性硬质聚氯乙烯复合材料的应用研究

经过改性的超细空心微珠可以作为填料加入到硬质聚氯乙烯（PVC－U）树脂中，同时改善PVC树脂的流变性、冲击性能和刚性等性能。研究结果表明，超细空心微珠加入到硬质PVC管材中，可以明显改善PVC硬管的加工流动性能，显著缩短塑化时间，降低最大扭矩。而超细空民微珠加入到硬质PVC板材时，可以提高PVC硬板的冲击性能，减小制品的收缩率，赋予PVC硬板优异的耐腐蚀性能，且产品的各项性能均符合PVC板材国家标准GB／T4454－96。     

IEEE 802.11 roaming and authentication in wireless LAN/cellular mobile networks

A wireless LAN service integration architecture based on current wireless LAN hot spots is proposed so that migration to a new service becomes easier and cost effective. The proposed architecture offers wireless LAN seamless roaming in wireless LAN/cellular mobile networks. In addition, a link-layer-assisted mobile IP handoff mechanism is introduced to improve the network/domain switching quality in terms of handoff delay and packet loss. An application layer end-to-end authentication and key negotiation scheme is proposed to overcome the open-air connection problem existing in wireless LAN deployment. The scheme provides a general solution for Internet applications running on a mobile station under various authentication scenarios and keeps the communications private to other wireless LAN users and foreign network. A functional demonstration of the scheme is given. The research results can contribute to rapid deployment of wireless LANs.