Effect of type of processing on the microstructural features and mechanical properties of Al-Cu/SiC metal matrix composites

In this study, an aluminum based metallic matrix (Al-2wt.% Cu) was reinforced with SiC particulates using a conventional casting technique and a new disintegrated melt deposition technique. Microstructural characterization studies conducted on the samples taken from disintegrated melt deposition technique revealed a more uniform distribution of SiC particulates and good interfacial integrity between SiC particulates and metallic matrix when compared to the conventionally cast composite samples. Results of ambient temperature mechanical tests demonstrate an increase in 0.2% YS and ultimate tensile strength of samples taken from disintegrated melt deposition technique when compared with the unreinforced and conventionally cast composite samples. The results of microstructural characterization and mechanical testing were finally rationalized in terms of the nature of processing technique employed to reinforce Al-2wt.% Cu metallic matrix with SiC particulates.     

Pharmacodynamic Comparison of a Nasal Formulation of Verapamil and Intravenous and Oral Dosage Forms

The nasal route has been shown to be effective for the administration of numerous drugs in order to improve drug bioavailability. A nasal gel of verapamil hydrochloride was formulated and evaluated pharmacodynamically in humans, using electrocardiographic results, with comparison to oral and IV routes. Seven volunteers were involved in the study and the pharmacodynamic parameters were evaluated statistically. Experimental nasal gel showed similar pharmacodynamic results with the intravenous route, which is a hint to the reduction in verapamilinduced first-pass metabolism. However, oral route of administration showed a tendency of less efficacy. No reasonable effect of verapamil could be obtained with the placebo group.     

Highly reliable testing of ULSI memories with on-chip voltage-downconverters

Two testing techniques for ultra-large-scale integrated (ULSI) memories containing on-chip voltage downconverters (VDCs) are described. The first in an on-chip VDC tuning technique that adjusts internal V_CC to compensate for the monitored characteristics of the process parameters during repair analysis testing. The second is an operating-voltage margin test, performed at various internal V_CC levels during the water sort test (WT) and the final shipping test (FT)     

Stem cells in prostatic epithelia

The normal prostate is, structurally and functionally, a highly complex glandular tissue in which populations of epithelial and stromal cells interact, one with the other, and are under a constant state of proliferation, differentiation, elimination and selective secondary replenishment so that functional integrity of the tissue is maintained. The ability of normal prostatic tissue to maintain its structure and function is dependent upon retention of cells, generally regarded as 'stem cells', which are able to respond by proliferation and selective differentiation within a wide range of phenotypic alternatives. With respect to cells in the epithelial compartment, replenishment is possible at several levels from within distinct pathways of normal cellular differentiation. It is now appreciated that fully differentiated prostatic epithelial cells retain a far greater degree of phenotypic 'plasticity' than was earlier apparent from morphological examination of the intact tissue. This inherent plasticity, coupled with the ability of the intact tissue to respond to diverse environmental (particularly humoral) stimuli by regenerating a wide and divergent spectrum of functional prostatic epithelial phenotypes is its strength--but also its weakness. Disturbance and distortion of the homeostatic regulatory mechanisms, whether physical or humoral, which control the normal sequence of epithelial proliferation, differentiation and elimination exposes these cells, particularly multipotent 'stem cells', to an increased probability of genetic change, thus resulting in either transient, or permanent, neoplastic transformation.     

Evaluation of multicast routing algorithms for real-timecommunication on high-speed networks

Multicast (MC) routing algorithms capable of satisfying the quality of service (QoS) requirements of real-time applications will be essential for future high-speed networks. We compare the performance of all of the important MC routing algorithms when applied to networks with asymmetric link loads. Each algorithm is judged based on the quality of the MC trees it generates and its efficiency in managing the network resources. Simulation results over random networks show that unconstrained algorithms are not capable of fulfilling the QoS requirements of real-time applications in wide-area networks. Simulations also reveal that one of the unconstrained algorithms, reverse path multicasting (RPM), is quite inefficient when applied to asymmetric networks. We study how combining routing with resource reservation and admission control improves the RPM's efficiency in managing the network resources. The performance of one semiconstrained heuristic, MSC, three constrained Steiner tree (CST) heuristics, Kompella, Pasquale, and Polyzos (1992), constrained adaptive ordering (CAO), and bounded shortest multicast algorithm (BSMA), and one constrained shortest path tree (CSPT) heuristic, the constrained Dijkstra heuristic (CDKS) are also studied. Simulations show that the semiconstrained and constrained heuristics are capable of successfully constructing MC trees which satisfy the QoS requirements of real-time traffic. However, the cost performance of the heuristics varies. The BSMA's MC trees are lower in cost than all other constrained heuristics. Finally, we compare the execution times of all algorithms, unconstrained, semiconstrained, and constrained     

Demographic study of first-ever stroke and acute myocardial infarction in Okinawa, Japan

We performed a cross-sectional survey of stroke and acute myocardial infarction (AMI) in Okinawa, Japan with a census population of about 1.2 million. A total of 3,644 cases of first-ever stroke and 898 cases of initial acute myocardial infarction (AMI) were detected. The age-adjusted annual incidence rate for stroke was 105 per 100,000 standard population of Japan, and that of AMI was 26. The case-fatality rate of stroke within 28 days of onset was 12.8%, and that of AMI was 22.2%. Of the stroke cases, 51.4% were diagnosed as brain infarction, 38.7% as brain hemorrhage, and 9.3% as subarachnoid hemorrhage. The diagnosis of stroke subtypes were confirmed by computed tomography or magnetic resonance imaging in 98.4% of all stroke cases. In Okinawa, the incidence rate of AMI was still considerably lower than that in the Western population, and the rate of stroke was similar to that in the Western population.     

Transcutaneous measurement and spectrum analysis of heart wallvibrations

For the noninvasive diagnosis of heart disease based on the acoustic and elastic characteristics of the heart muscle, it is necessary to transcutaneously measure small vibration signals, including components with an amplitude of less than 100 μm, from various parts of the heart wall continuously for periods of more than several heartbeats in a wide frequency range up to 1 kHz. Such measurement, however, has not been realized by any ultrasonic diagnostic methods or systems to date. By introducing the constraint least-square approach, this paper proposes a new method for accurately tracking the movement of the heart wall based on both the phase and magnitude of the demodulated signal to determine the instantaneous position of the object so that the vibration velocity of the moving object can be accurately estimated. By this method, small vibrations of the heart wall with small amplitudes less than 100 μm on the motion resulting from a heartbeat with large amplitude of 10 mm can be successfully detected with sufficient reproducibility in the frequency range up to several hundred Hertz continuously for periods of about 10 heartbeats. The resultant small vibration is analyzed not only in the time domain, but also in the frequency domain. As confirmed by the preliminary experiments herein reported, the new method offers potential for research in acoustical diagnosis of heart disease     

Fuzzy inference and fuzzy inference processor

Fuzzy inference, a data processing method based on the fuzzy theory that has found wide use in the control field, is reviewed. Consumer electronics, which accounts for most current applications of this concept, does not require very high speeds. Although software running on a conventional microprocessor can perform these inferences, high-speed control applications require much greater speeds. A fuzzy inference date processor that operates at 200000 fuzzy logic inferences per second and features 12-b input and 16-b output resolution is described