High efficiency single pulse doped Al0.60In0.40As/GaInAs/InP HEMTs for Q-band power applications

Single pulse doped, 0.2 μm-gate Al_0.60In_0.40 As/GaInAs/InP HEMTs have been fabricated and characterised. The complete process sequence for the HEMTs includes SiN_x passivation and dry etched via hole fabrication. Power measurements at 44 GHz on a 10×60 μm² device yielded 225 mW output power, 5 dB associated gain, and 39% power added efficiency. The results indicate that the single pulse doped InP-based HEMTs are suitable for high power applications at Q-band     

Spatially-multiplexed fibre-optic Bragg grating strain andtemperature sensor system based on interferometric wavelength-shiftdetection

A prototype fibre-optic system using interferometric wavelength-shift detection, capable of multiplexing up to 32 fibre-optic Bragg grating strain and temperature sensors with identical characteristics, has been demonstrated. This system is based on a spatially multiplexed scheme for use with fibre-based low-coherence interferometric sensors, reported previously. Four fibre-optic Bragg grating channels using the same fibre grating have been demonstrated for measuring quasi-static strain and temperature     

A CMOS differential buffer amplifier with accurate gain andclipping control

A CMOS fully differential buffer amplifier with accurate gain and clipping control is presented. The gain is made variable by controlling the amount of the feedback around the power amplifier by means of an additional gain control loop. A new clipping technique is used to control the clipping level of the amplifier. The amplifier is realized in a 1.2 μm CMOS process with a single 5 V power supply. Measurements confirm the presented techniques     

Design and characteristics of InGaAs/InP composite-channel HFET's

A design for composite-channel structures consisting of an InGaAs channel and an InP subchannel for use as heterostructure field-effect transistors is presented for the first time. This novel channel structure takes advantage of both the high drift velocity and low impact ionization of InP at high electric fields as well as the high electron mobility of InGaAs at low electric fields. It is shown that the doping density of the InP subchannel is the key parameter to realize the advantages of the composite channel. A very high transconductance of 1.29 S/mm and a current gain cutoff frequency of 68.7 GHz are achieved with 0.6 and 0.7 /spl mu/m gates, respectively. The average velocity of electrons in the composite channel is 2.9/spl times/10/sup 7/ cm/s. The devices have no kink phenomena in their I-V characteristics possibly due to low impact ionization in the InP subchannel.<>     

Electromagnetic shielding of HF lamps using wire structures:simulation and measurement

High-frequency (HF) operated lamps, such as HF fluorescent lamps, have several advantages over conventional ones but they contaminate the environment with their EM field emissions. The shielding of the electromagnetic emission should be realized without much effect on the emission of the light. Enclosing the lamps in a housing made of widely spaced thin wires could be an appropriate way to shield the electromagnetic field. The paper studies the effectiveness of some wire structures for shielding the electromagnetic emission from HF fluorescent lamps. An analytical study, method of moments (MoM), and measurements have been carried out to evaluate the strength of the near-field and the shielding effectiveness of the structures     

Packaging of a 128 by 128 liquid-crystal-on-silicon spatial lightmodulator using self-pulling soldering

A self-pulling soldering technology has been demonstrated for assembling liquid crystal on silicon (LCOS) spatial light modulators (SLMs). Solder joints with different profiles and sizes are designed to provide vertical surface tension forces to control the gap accommodating the ferroelectric liquid crystal (FLC) layer in the range of a micron with sub-micron uniformity. This technology provides an automatic, batch assembly process for a LCOS SLM through one reflow process. The component designs and process optimization are described, and the first operational results are presented     

Design of a 1-MW,CW coaxial gyrotron with two gaussian beam outputs

The design of a 170 GHz, 1 MW-CW gyrotron for electron cyclotron heating of nuclear fusion plasmas is presented. The designed gyrotron incorporates a coaxial cavity to reduce mode competition, and a coaxial electron gun to support the cavity inner conductor. A new mode converter splits the generated wave into two beams and radiates them in different directions. The radiated beams are transmitted to two output windows through two mirror systems, being transformed into Gaussian-like beams. A single-stage depressed collector improves the overall efficiency of the gyrotron and reduces the heat flux to the collector surface.     

Osteoclastic features of multinucleated giant cells responding to synthetic hydroxyapatite implanted in rat jaw bone.

Multinucleated giant cells (MGCs) that responded to synthetic hydroxyapatite (HAP) implanted in rat mandibles were studied with electron microscopy. HAP used in this study sintered at 200 degrees C (HAP200) and at 125 degrees C (HAP1250) after the synthesis by a wet method. One to three weeks after the intraosseous implantation of HAP, MGCs responding to HAP200 had not only well-developed ruffled border and the clear zone but well-developed perinuclear Golgi complex, many mitochondria and vesicles in their cytoplasms. MGCs responding to HAP1250 had the clear zone, but not the ruffled border although they showed similar cytoplasmic features to those of MGCs responding to HAP200. They merely extended short slender cytoplasmic processes to HAP1250. These results suggest that although osteoclast-like MGCs respond to HAP implanted in the bone, the development of the ruffled border-clear zone system depends on physicochemical properties of HAP.     

Comparison of the effect of a proteolytic enzyme dispase and a chelator for the preparation of epidermal sheet from nude mice.

Histochemical studies of epidermal Langerhans cells require well-preserved epidermal sheets. We studied the conditions for the preparation of the epidermal sheets from the skin of the ear, hind limb and trunk of nude mice. Two types of commercial dispase, and ethylenediaminetetraacetic acid (EDTA), were used at several concentrations and the effects were compared. Dermo-epidermal separation was evaluated by the preservation of ATPase activity of Langerhans cells in the epidermal sheet and by the ultrastructure of epidermal cells (Langerhans cells and keratinocytes) as well as epidermal-dermal junction. Good separation depended on the combination of the concentration of the reagent and site of the skin. The concentrations of both dispase and EDTA effective for separation of the epidermis in the nude mouse were lower than those in other mouse strains reported.     

Neural-network-based adaptive matched filtering for QRS detection

We have developed an adaptive matched filtering algorithm based upon an artificial neural network (ANN) for QRS detection. We use an ANN adaptive whitening filter to model the lower frequencies of the ECG which are inherently nonlinear and nonstationary. The residual signal which contains mostly higher frequency QRS complex energy is then passed through a linear matched filter to detect the location of the QRS complex. We developed an algorithm to adaptively update the matched filter template from the detected QRS complex in the ECG signal itself so that the template can be customized to an individual subject. This ANN whitening filter is very effective at removing the time-varying, nonlinear noise characteristic of ECG signals. Using this novel approach, the detection rate for a very noisy patient record in the MIT/BIH arrhythmia database is 99.5%, which compares favorably to the 97.5% obtained using a linear adaptive whitening filter and the 96.5% achieved with a bandpass filtering method.