Radon and 'King Solomon's Miners': Faynan Orefield, Jordanian Desert

Concentrations of 222Rn were measured in ancient copper mines which exploited the Faynan Orefield in the South-Western Jordanian Desert. The concentrations of radon gas detected indicate that the ancient metal workers would have been exposed to a significant health risk and indicate that any future attempt to exploit the copper ores must deal with the hazard identified. Seasonal variations in radon concentrations are noted and these are linked to the ventilation of the mines. These modern data are used to explore the differential exposure to radon and the health of ancient mining communities.     

Kinetics of microbial nitrification: nitrite-nitrogen oxidation

The kinetics of nitrite-nitrogen oxidation by enriched Nitrobacter cultures were examined under various temperatures (9°–35°C), pH (6.0–8.5), and microbial concentrations. For the substrate concentrations examined (100–1100 mg N1⁻¹) the reaction was zero order and correlations between temperature, pH, microbial concentrations and reaction rates were formulated. Inhibition by free ammonia and nitrous acid is discussed. This study of enriched cultures of nitrobacter organisms also provide some insight into the growth characteristics of this fastideous organism under conditions of dense population and severe environmental conditions (temperature and pH).     

The centralization index: A measure of local spatial segregation

Segregated areas may occur around an attractive park or a waste incinerator, but the magnitude and group membership of the people in closest proximity will likely be difierent. We therefore introduce a local segregation measure that can be applied to any location within a metropolitan area, and that can identify the group that is relatively more concentrated around that reference location. We further introduce an inference approach to identify the statistical significance of a particular segregation value. In an exploratory setting the index can be used to generate a map of hot spots, and seed the question: “why is this group significantly concentrated around that location?”     

Microstructure-Based Estimation of Strength and Ductility Distributions for $$\alpha +\beta $$ Titanium Alloys

Titanium alloys are processed to develop a wide range of microstructure configurations and therefore material properties. While these properties are typically measured experimentally, a framework for property prediction could greatly enhance alloy design and manufacturing. Here a microstructure-sensitive framework is presented for the prediction of strength and ductility as well as estimates of the bounds in variability for these properties. The framework explicitly considers distributions of microstructure via new approaches for instantiation of structure in synthetic samples. The parametric evaluation strategy, including the finite element simulation package FEpX, is used to create and test virtual polycrystalline samples to evaluate the variability bounds of mechanical properties in Ti-6Al-4V. Critical parameters for the property evaluation framework are provided by measurements of single crystal properties and advanced characterization of microstructure and slip system strengths in 2D and 3D. Property distributions for yield strength and ductility are presented, along with the validation and verification steps undertaken. Comparisons between strain localization and slip activity in virtual samples and in experimental grain-scale strain measurements are also discussed.

     

High Temperature Oxidation Behavior of Conventional and Nb-Modified MAR-M246 Ni-Based Superalloy

The present investigations focused on the thermal oxidation of two variants of MAR-M246 alloy having the same contents of Ta and Nb in at. pct, considering the effects of total replacement of Ta by Nb. The alloys were produced by investment casting using high purity elements in induction furnace under vacuum atmosphere. The alloys were oxidized pseudo-isothermally at 800 °C, 900 °C and 1000 °C up to 1000 hours under lab air. Protective oxidation products growing on the surface of the oxidized samples were mainly Al₂O₃, Cr₂O₃. Other less protective oxide such as spinels (NiCr₂O₄ and CoCr₂O₄) and TiO₂ were also detected as oxidation products. The conventional alloy exhibited slight internal oxidation at 800 °C and an enhanced resistance at 900 °C and 1000 °C. The Nb-modified alloy presented an exacerbated internal oxidation and nitridation at 900 °C and 1000 °C and an enhanced resistance at 800 °C. At 1000 °C, Nb-modified alloy was particularly affected by excessive spalling as the main damage mechanisms. From a kinetic point of view, both alloys exhibit the same behavior at 800 °C and 900 °C, with k_p values typical of alumina forming alloys (2 × 10⁻¹⁴ to 3.6 × 10⁻¹³ g² cm⁻⁴ s⁻¹). However, Ta modified alloys exhibited superior oxidation resistance at 1000 °C when compared to the Nb modified alloy due to better adherence of the protective oxide scale.

     

Substrate Stimulated Orientation for Pure Aluminum

Oriented materials are of great importance, but their formation is rarely described. Here, nine Al/Al₂O₃ systems were designed to identify the dominant factors. Electron back-scattered diffraction indicates that the new Al crystal(s) with one or multiple orientation(s) can be stimulated by one single-crystal Al₂O₃ substrates. Synchrotron radiation diffraction shows that the preferred orientation(s) is/are determined based on the initial stage of the liquid–solid transition. The nonpreferred orientation can be suppressed through competition.

     

Sintering and Briquetting Synergy in Blast Furnace Smelting

Metallurgist - The article describes the concept of partially replacing the sinter in a blast furnace charge with extrusion briquettes to form the basis for sintering and briquetting synergy. The...     

The Influence of Hydrogen Concentration in an Ar–H2 Mixture on the Electrical Properties of Solid Oxide Fuel Cells

Powder Metallurgy and Metal Ceramics - Fuel cells are today among the most efficient and environmentally friendly devices for the production of electricity. They are developing rapidly and are...