Determination of the liquidus lines and isotherms of the Hg-Zn-Te system by a modified direct observation method

The modified direct observation method is employed for the determination of the liquidus lines in the (Hg_{1_x}Zn_x)_{1_y}Te_y, ternary system. The liquidus temperatures of the ternary samples of various compositions withx from 0.05 to 0.30 andy from 0.5 to 0.9 are measured. The temperature-composition phase diagrams and some liquidus isotherms are established for this system.     

Efficient algorithms for SS/TDMA scheduling

Efficient scheduling algorithms for the slot assignment problem in a satellite-switched time-division multiple-access (SS/TDMA) system are presented. This problem is translated into a modified open-shop scheduling problem, allowing the use of known optimal algorithms. Their complexity is expressed as a function of the following parameters: the number of nonzero entries in the demand matrix, the number of uplinks, and the number of downlinks. According to the values of these parameters, the algorithm with the lowest computational complexity can be adopted. Although the computational complexity of previously published algorithms is drastically reduced, simulation results show that the results are close to previously presented solutions in terms of the assignment duration and the number of switching matrices     

Eigenvalue-based algorithms for testing positive realness of SISO systems

A computational test for scalar positive real and strictly positive real functions is proposed in this paper. The input for this algorithm is state space representation, not necessarily minimal. It is derived for the discrete time problem, based on numerical stable eigenvalue computations. The test can be used in the continuous counterpart, which is in fact an improvement of an algorithm posed by Bai and Freund. Differences between the discrete and continuous time problems are also pointed out.     

Fuzzy reasoning Petri nets

This paper presents a fuzzy reasoning Petri net (FRPN) model to represent a fuzzy production rule-based system. The issues of how to represent and reason about rules containing negative literals are addressed in the proposed PN model. The execution rules based on the model are defined formally using the operators in max-algebra. Then, a fuzzy reasoning algorithm is proposed to perform fuzzy reasoning automatically. The algorithm is consistent with the matrix equation expression method in the traditional PNs and allows one to exploit the maximum parallel reasoning potential embedded in the model. The legitimacy and feasibility of the proposed approach are proved and validated through a turbine fault diagnosis expert system.     

HDPE/CB-GP复合材料体系电性质的研究

当HDPE含量46％（质量分数，以下同）、其它添加剂（如抗氧剂、阻燃剂、交联剂和润滑剂等辅助填料）的含量11％，两种导电填料石墨（GP）和碳黑（CB）的总含量为43％时，研究结果表明石墨含量的变化对HDPE/CB-GP复合材料室温电阻率、阴C强度和后NTC强度有显著的影响．HDPE/CB-GP复合材料中GP的含量〈8．6％时，样品的室温电阻率〈30Ω·m，PTC强度〉7、后NTC强度〈1．3；电阻率．温度曲线经过17次冷热循环后重现性好，复合材料具有实际应用价值；GP在复合材料中为层片状结构。     

安钢宽板坯连铸机达产实践

分析了安钢宽板坯连铸机在热试车期间出现的生产问题,总结出制约生产主要因素,制定针对性措施,使该连铸机在较短时间内实现达产创效.     

鄂尔多斯西缘前陆盆地巨厚黄土地区地震采集技术

鄂尔多斯西缘前陆盆地表层地质地貌极其复杂，有巨厚黄土区、黄土-沙漠区及山前砾石-黄土区，独特的黄土地貌使得地震采集面临着诸多技术难题。根据以往巨厚黄土地区地震采集经验，采用多种方法系统地开展黄土表层结构精细调查，深入研究黄土地球物理特征及激发因素与表层黄土结构之间的关系，优选激发井位和井深，确保了激发效果；采用小道距、三线小线距、高密度空间采样技术，获得了高信噪比、高分辨率地震资料。研究表明，巨厚黄土地区地震采集时应优选激发井位和岩性，合理选择激发井深；坚持多深井组合激发、单井药量不宜过大总药量要大两项基本原则；采用高密度采样技术，提高采集资料的覆盖次数和信噪比。图10表1参15