Removal of 2,4,6-trichlorophenol from a solution by humic acids repeatedly extracted from a peat soil

Humic acid (HA) is one of the major components of soil organic matter. It strongly affects the sorption behavior of organic and inorganic contaminants in soils. To obtain a better understanding of the interactions of contaminants with HA, a repeated extraction technique has been applied to a peat soil to obtain HA fractions with varying aliphaticity and aromaticity, which were subsequently correlated to the sorption properties of 2,4,6-trichlorophenol (TCP). HA fractions were extracted repeatedly using an alkaline solution and each HA fraction was separated into two portions with an air-drying or re-suspending (denoted as RSHAs) process. Solid-state (13)C NMR and elemental analysis demonstrated that the aromaticity and polarity of HAs decreased with extractions. Kinetic results indicated that air-dried HAs exhibited two-step first order sorption behavior with a rapid stage followed by a slower stage. The slower sorption is attributed to the diffusion of 2,4,6-TCP in the condensed aromatic domains of HAs. Conversely, sorption of 2,4,6-TCP on RSHAs was extremely rapid and could not be fitted with any kinetic model. For air-dried HAs the sorption capacity (K(oc)) was weakly correlated with the chemical compositions of HAs. However, a positive trend between K(oc) and aromaticity was observed for RSHAs. Compared with the results of air-dried HAs with their counterparts of RSHAs, it is therefore concluded that air-drying may alter the structure of HAs through artificially creating a more condensed domain in HAs. The structural alternation may result in an incorrect interpretation of the relationship between sorption capacity and chemical composition of HAs and a misjudgment of the transport behavior of 2,4,6-TCP in soils and sediments.     

Effect of calcinations of starting powder on mechanical properties of hydroxyapatite–alumina bioceramic composite

The effect of calcinations of starting powder on the mechanical properties of hydroxyapatite (HA)-based bioceramic composite was investigated. The calcinations of HA powder in air at 900 °C increased the crystallinity as well as the size of the powder. Ball milling after the calcinations was effective in eliminating large agglomerates in the powder. When the powder was mixed with reinforcing Al₂O₃ powder, the mixture became fine and homogeneous. The flexural strength of HA–Al₂O₃ composite was increased by the calcinations processes at all the Al₂O₃ concentration. However, the fracture toughness was not much influenced by the calcinations. These results lead to the conclusion that the calcinations process effectively reduced the critical flaw size in the body by removing the agglomerates in the HA powder.     

Analysis of the glow curves obtained from LiF:Mg,Cu,Na,Si TL material using the general order kinetics model

Three-dimensional thermoluminescence (TL) spectra based on temperature, wavelength and intensity for newly developed LiF:Mg,Cu,Na,Si TL material at the Korea Atomic Energy Research Institute (KAERI) were measured and analysed. The glow curves were obtained by integration of luminescence intensity over all wavelengths at each temperature, and various trapping parameters related to the traps were determined by analysing these curves. A computerised glow curve deconvolution (CGCD) method which was based on the general order kinetics (GOK) model was used for the glow curve analysis. The glow curves of LiF:Mg,Cu,Na,Si TL material were deconvoluted to six isolated glow curves which have peak temperatures at 333, 374, 426, 466, 483 and 516 K. The main glow peak of peak temperature at 466 K had activation energy of 2.06 eV and a kinetic order of 1.05. This TL material was also found to have three recombination centres, 1.80 eV, 2.88 eV and 3.27 eV by analysis of the TL spectra.     

The removal and recovery of Cr(VI) by Li/Al layered double hydroxide (LDH)

Hexavalent Cr has been identified as one of the toxic metals commonly present in industrial effluents. Among the treatment techniques developed for removing Cr(VI) from waste waters, sorption is most commonly applied, due to its simplicity and efficiency. However, few adsorbents can be recycled and reused cost-effectively. In this study, the removal and recovery of Cr(VI) from water using Li/Al LDH was investigated. The removal of Cr(VI) by Li/Al LDH was evaluated in a batch mode. The results demonstrated that Cr(VI) adsorption onto Li/Al LDH occurs by replacing the Cl(-) that originally exists in the interlayer of the adsorbent. The degree of Cr(VI) adsorption observed for Li/Al LDH was relatively high and the process occurred rapidly; however, a portion of adsorbed Cr(VI) was gradually desorbed, due to the Li de-intercalation of Li/Al LDH. Lithium de-intercalation from Li/Al LDH with interlayer Cl(-) and interlayer Cr(VI) follows the first order kinetics and has the activation energies of 76.6 and 41.5 kJ mol(-1), respectively. The properties of thermal unstability and the high adsorption capacity of Li/Al LDH may lead to the development of an innovative technique for the removal of Cr(VI) from Cr(VI)-containing wastewater. That is, Li/Al LDH may be used as an effective adsorbent for the adsorption of Cr(VI) in an ambient environment. Following the adsorptive process, the adsorbed Cr(VI) may be released, using heated water to treat the Cr(VI)-containing Li/Al LDH particles. Through this hydrothermal treatment of the used adsorbent, Cr(VI) can be recovered and the solid product (gibbsite) can be recycled for further use.     

Synthesis and in vitro properties of dexamethasone 21-sulfate sodium as a colon-specific prodrug of dexamethasone

We synthesized dexamethasone 21-sulfate sodium (DS) as a colon-specific prodrug of dexamethasone and investigated its properties. Introduction of a sulfate group to dexamethasone lowered the apparent partition coefficient from 52.5 to 0.27 in 1-octanol/pH 6.8 phosphate buffer at 37°C. DS was stable on incubation with buffer solutions of varied pH or with the upper intestinal contents of rats at 37°C for 24 h. On incubation with the cecal contents, DS was hydrolyzed by producing dexamethasone over 80% of the dose at 10 h. When DS was incubated with the cecal contents collected from trinitrobenzenesulfonic acid (TNBS)-induced colitic rats, the degree of prodrug hydrolysis and production of dexamethasone amounted to 70% of healthy rats. In comparison with prednisolone, hydrocortisone, and cortisone, dexamethasone was stable against bioinactivation by the cecal contents, a desirable property for the development of a colon-specific prodrug. These results demonstrated that DS might be delivered specifically to the colon as an intact form to produce dexamethasone in high yield, suggesting DS as a potential colon-specific prodrug of dexamethasone.     

Magnetic sensitivity enhanced novel fluorescent magnetic silica nanoparticles for biomedical applications

We synthesized novel fluorescent magnetic silica nanoparticles (FMSNPs) containing large magnetic components for biomedical application. By employing assemblies of magnetic nanoparticles as kernels against FMSNPs, both the saturation of magnetization and the magnetic resonance (MR) signal intensity were significantly enhanced. Furthermore, the cellular binding of FMSNPs was improved by introducing a positive charge on the surface of the FMSNPs, and fluorescent dyes on the surface of FMSNPs enable optical imaging of sub-cellular regions.     

Growth and characterization of well-aligned densely-packed rutile TiO(2) nanocrystals on sapphire substrates via metal-organic chemical vapor deposition

Well-aligned densely-packed rutile TiO(2) nanocrystals (NCs) have been grown on sapphire (SA) (100) and (012) substrates via metal-organic chemical vapor deposition (MOCVD), using titanium-tetraisopropoxide (TTIP, Ti(OC(3)H(7))(4)) as a source reagent. The surface morphology as well as structural and spectroscopic properties of the as-deposited NCs were characterized using field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), selected-area electron diffractometry (SAED), x-ray diffraction (XRD) and micro-Raman spectroscopy. FESEM micrographs reveal that vertically aligned NCs were grown on SA(100), whereas the NCs on the SA(012) were grown with a tilt angle of ～33° from the normal to substrates. TEM and SAED measurements showed that the TiO(2) NCs on SA(100) with square cross section have their long axis directed along the [001] direction. The XRD results reveal TiO(2) NCs with either (002) orientation on SA(100) substrate or (101) orientation on SA(012) substrate. A strong substrate effect on the alignment of the growth of TiO(2) NCs has been demonstrated and the probable mechanism for the formation of these NCs has been discussed.     

In vivo behavior of bioactive phosphate glass-ceramics from the system P2O5–Na2O–CaO containing TiO2

Soda lime phosphate bioglass-ceramics with incorporation of small additions of TiO₂ were prepared in the metaphosphate and pyrophosphate region, using an appropriate two-step heat treatment of controlled crystallization defined by differential thermal analysis results. Identification and quantification of crystalline phases precipitated from the soda lime phosphate glasses were performed using X-ray diffraction analysis. Calcium pyrophosphate (β-Ca₂P₂O₇), sodium metaphosphate (NaPO₃), calcium metaphosphate (β-Ca(PO₃)₂), sodium pyrophosphate (Na₄P₂O₇), sodium calcium phosphate (Na₄Ca(PO₃)₆) and sodium titanium phosphate (Na₅Ti(PO₄)₃) phases were detected in the prepared glass-ceramics. The degradation of the prepared glass-ceramics were carried out for different periods of time in simulated body fluid at 37 °C using granules in the range of (0.300–0.600 mm). The released ions were estimated by atomic absorption spectroscopy and the surface textures were measured by scanning electron microscopy. Evaluation of in vivo bioactivity of the prepared glass-ceramics was carried through implanting the samples in the rabbit femurs. The results showed that the addition of 0.5 TiO₂ mol% enhanced the bioactivity while further increase of the TiO₂ content decreased the bioactivity. The effect of titanium dioxide on the bioactivity was interpreted on the basis of its action on the crystallization process of the glass-ceramics.     

Structural analysis of triacylglycerols and edible oils by near-infrared Fourier transform Raman spectroscopy

Fourier transform Raman spectroscopy was employed for structural analysis of triacylglycerols and edible oils. Raman spectra sensitively reflected structural changes in oils. Even slight structural fluctuation between triacylglycerols and free fatty acids led to obvious differences in Raman bands as shown by C-O-C stretching from 800 to 1000 cm(-1) and the band at 1742 cm(-1). Structural difference in geometric isomers was easily distinguished as proved by C = C stretching at 1655 cm(-1) (cis) shifting to 1668 cm(-1) (trans) and by =C-H in-plane bending at 1266 cm(-1) in cis disappearing in the trans isomer. Raman intensity at 1266, 1302, and 1655 cm(-1) changed concomitantly with the change of double-bond content in oils. It showed that FT-Raman was capable of precisly reflecting the content of double bonds in oils. A linear correlation with high consistency between the Raman intensity ratio (v1655/v1444) and the iodine value was obtained for commercial oils. Based on the results, FT-Raman spectroscopy proved itself a simple and rapid technique for oil analysis since each measurement could be directly completed in 3 min without any sample modifications.