Fabrication of multi-walled carbon nanotube reinforced polyelectrolyte hollow nanofibers by electrospinning

Hybrid hollow multi-walled carbon nanotubes (MWCNTs)/polyelectrolytes (PE) nanofibers were prepared by a combination of the electrospinning method and layer-by-layer (LbL) technique. The mixed polystyrene (PS)/MWCNTs nanofibers were obtained by electrospinning method, which were employed as templates to self-assembly multilayered polyelectrolytes by LbL technique. Hollow MWCNTs/PE nanofibers were obtained by selectively removed part of the template: PS, which is confirmed by Raman spectra, transmission electron microscopy (TEM) and scanning electron microscopy (SEM).     

Dynamic bandwidth allocation for multimedia traffic with rate guarantee and fair access in WCDMA systems

Packet scheduling in a WCDMA system poses a new challenge due to its nature of variable bit rates and location-dependent, time-varying channel conditions. In this work, three new downlink scheduling algorithms for a WCDMA base station are proposed to support multimedia transmissions. Using a credit management and a compensation mechanism, our algorithms provide rate guarantee and fair access to mobile terminals. In particular, we propose to allow a user to simultaneously use multiple OVSF codes in a time-sharing manner, which we call a multicode, shared model. Using multiple codes allows us to compensate those users suffering from bad communication quality or even errors. The proposed schemes can tolerate a multistate link condition (compared to the typically assumed two-state, or good-or-bad, link condition) by adjusting the number of OVSF codes and the spreading factor of each code. Simulation results show that the proposed schemes do achieve higher bandwidth utilization while keeping transmission delay low.     

生物质成型螺杆的受力分析

以BIO-15型生物质成型机为例,借鉴单螺杆成型机的固体塞输送理论--Darnell-Mol模型,对成型机进料段、压缩段所受压力进行分析,分别采用线性、指数函数,通过求解功率平衡方程,得出螺槽、前向螺纹面和背向螺纹面的压力分布规律,经功率检验,计算结果基本与实际相符.     

卧式厚箔剪切机下刀摆动的消除方法

介绍了一种当前铝加工设备中常见的卧式厚箔剪切机.重点分析了其中剪切装置的工作原理,并就其缺陷提出改进方案.     

2个含苯甲酰胺基偶氮苯类化合物的合成及光致变色

通过相转移催化剂PEG-400高产率合成了2个含苯甲酰胺基偶氮苯类化合物，通过核磁共振氢谱，红外光谱元素分析表征了其结构；经365nm的紫外光照射该化合物的DMSO溶液后测其紫外可见吸收光谱，表明化合物具有良好的光致变色性。     

延长测井电缆使用寿命的方法探讨

由于对测井电缆机械性能缺乏了解,使用不规范,使测井电缆使用寿命降低.通过对测井电缆结构、制造工艺进行分析,进一步掌握其性能,提出通过正确安装、使用前需进行稳定化处理、在使用中注意控制起下速度、日常清洁润滑、定期对电缆进行维护保养等方法维持铠装层正常状态,减少层间摩擦力,不扭曲,缆芯通断良好等方法,从而延长电缆的使用寿命.     

无线局域网的安全解决方案

本文描述了无线局城网中的认证和密钥管理协议,CCMP认证加密协议。IEEE 802.11依赖于IEEE 802.1x 来支持认证和密钥管理服务,更进一步的,四次握手协议用来建立分组传输的数据加密密钥。IEEE 802.11i也定义了认证者更新一个组暂时密钥(GTK)给请求者的组密钥握手,这样请求者可以接收广播消息。     

克拉-2气田射孔工艺研究

克拉-2气田具有5大射孔难题:射孔井段长、地层压力大、产气量大、流体中腐蚀性物质和不宜丢枪,作业风险非常大。提出了带枪生产的射孔方案和射孔后取枪生产2种射孔方案,通过分析对比优选出最佳方案——最终选定模块式射孔枪过油管方案,并对该方案作了较为详尽的叙述,在后来的施工中成功地得到了印证。     

边坡支护中多种技术措施的综合应用

通过工程实例,介绍了锚杆喷射混凝土支护技术与高压喷射混凝土搅拌桩支护技术在工程中的综合利用,同时也验证了该技术的可行性及经济性。     

食物营养规划培训效果追踪和影响因素分析

本文采用调查问卷,追踪访问了参加食物营养规划培训班的人员一年后的工作开展、培训知识掌握和应用情况.结果表明,这些人员较好地掌握了培训知识,平均掌握率为70%,培训知识和技能应用率平均为46%;性别、年龄、技术职称和部门来源等对培训知识掌握和应用有一定的影响.