Mathematical modelling and numerical simulation of ordered porosity metal materials formation

Ordered porosity metal materials belong to a relatively new class of porous materials named gasars. This paper presents a mathematical model of the complex physical phenomena in the production of gasars. Analyses for heat transfer, solidification kinetics and gas diffusion were coupled to describe the formation of unique gasar structure. Several criterial functions were introduced to provide significant quantitative information about the relationship between the operating technological parameters and the final structure. The computational outcomes of the numerical simulation were compared with the characteristics of real gasar ingots. The model was applied to determine the boundary conditions that would provide approximately constant physical conditions on the solidification front. The structure sensitiveness of gasars with respect to the different technological parameters is discussed.     

西气东输放空系统的设计与研究

论述了石油天然气行业中的放空系统工作原理，研究了西气东输采用的放空点火系统特点，讨论了放空立管的计算模型，提出了比较符合实际情况的计算模型，指出在桅杆结构的计算分析中，应该考虑钢丝绳的弹性支撑作用。钢丝绳的弹性支撑作用对结构的周期计算、风荷载导算、地震作用的计算都有较大的影响。     

气动贯通式潜孔锤反循环连续取心取样钻进新技术在河南钼矿中应用

三道庄钼矿勘探生产中钻遇的地层非常复杂，采用其他方法均无法实现钻进，经过分析比较，决定采用贯通式潜孔锤反循环连续取心（样）钻进新技术来解决该地层钻进难、成孔难、取样难等三大问题。文章从钻进技术特点、工作原理等方面对该技术进行详细分析，得出其具有钻进效率高、岩心（样）采取率高、成孔质量好等突出优点。并介绍了钻进主要设备机具的配套、施工工序、操作要点、遇到问题的解决方法等。在河南钼矿露天采石场应用该项技术，有效避免了塌孔和卡钻事故，工程进展顺利、质量好、岩心（样）采取率在98％以上，取得了良好的效果。针对在生产试验中遇到的某些问题，作者提出了一些改进建议。     

深水海底泥浆举升钻井技术及其应用前景

为了解决深水钻井中遇到的问题，由Conoco公司领导的工业联合项目组研发了海底泥浆举升钻井（以下简称SMD）技术。采用该技术进行深水钻井时，隔水管内充满海水，泥浆用小直径管线从海底返回，在返回环空中形成两个压力梯度，实现双梯度控压钻井。文中着重介绍了SMD的理论依据、系统工作原理、系统关键设备以及SMD井控程序的HAZOP分析等。从技术适用性、经济性、装备以及可能存在的风险等方面对该技术在南中国海钻井中使用的可行性进行研究，并展望其应用前景。     

现场总线漫谈

从现场总线多标准的现状出发，阐述了控制对象多样性与技术多样性之间的必然联系，通过对目前现场总线与传统DCS应用现状的分析，对现场总线的发展和应用前景进行了展望。     

关于天然气水合物钻采工艺技术进展的研究

目前全球正面临着前所未有的能源危机，天然气水合物由于储量大、能量密度高而将成为一种诱人的新型能源。天然气水合物主要存在于冻土带和海洋，在地下处于低温和高压状态，以现有的技术，钻井和开采都存在很大的困难。简要介绍了天然气水合物的性质及储量，阐述了天然气水合物钻井的六个挑战及目前国外天然气水合物的两种钻探方法；同时阐述了以热力法、降压法和化学试剂注入法为主的天然气水合物开采方法，并针对天然气水合物钻采技术现状指出了下一步的研究方向。     

6种金属材料在典型工业大气中的腐蚀规律

选取具有代表性的碳钢、不锈钢、镀锌碳钢、铝、钛和铜挂片,在某企业不同部位投放后进行为期半年的大气腐蚀试验,得出了在半年期中的腐蚀规律。在此基础上,对每种金属材料的腐蚀特点进行总结,并对大气腐蚀的各种影响因素进行分析,提出了行之有效的防护措施。     

燃气管网动态仿真的研究及应用

研究和了解燃气在管道中的流动，是进行燃气管网系统优化和提高管网输运系统安全性的前提和基础。以流体力学三大守恒方程为基础，建立了等温和非等温条件下的燃气管网稳态和动态仿真理论模型。以有限差分法为基础，得到了上述模型的求解方法，并加入了耗散项，提高了求解方法的稳定性。通过增加初始点和延长出口点的方法，简化了模型的求解。通过在北京六环天然气管网中的初步应用，分别得到了与实际值综合相对误差为1.21％和2.62％的压力和流量仿真值，从而验证了模型及求解方法的可靠性。     

Catalytic aminolysis of epoxide by alumina prepared from amine-protected Al precursor

The catalytic activities of alumina prepared from an Al alkoxide-amine adduct monomer for the reaction of cyclopentene oxide with piperidine was determined after various pretreatments, including calcination and exposure to moisture. They were compared with the activity of alumina prepared by the conventional hydrolysis method. It was found that the as-prepared sample from the alkoxide-amine monomer preparation was five times more active than a conventional preparation, suggesting that it has a higher density of surface Lewis acid sites. However, its activity was much more severely suppressed by exposure to moisture.     

Formulation of a ceramic ink for a wide-array drop-on-demand ink-jet printer

This paper describes the methodology for simulating a reprographic ink with a ceramic ink based on a commercially available zirconia powder for direct ceramic ink-jet printing. Of over-riding importance was matching viscosity and this was tested systematically by using a mineral oil–hexane binary system. Of secondary importance was adjustment of the pressure defect behind the nozzle to compensate for small differences in surface tension. The inks tested in the wide array print-head were based on low electrical conductivity liquids to avoid damage to the electroding system. The organic binder for the zirconia ink was paraffin wax and the dispersant was a hydroxystearic acid based polyester.