High response organic ultraviolet photodetector based on bis (2-methyl-8-quinolinato)-4-phenylphenolate aluminum

We report highly efficient visible-blind ultraviolet photodetectors based on 1,3,5-tris(3-methylphenyl-phenylamino)-triphenyamine (m-MTDATA) as donor and bis(2-methyl-8-quinolinato)-4-phenylphenolate aluminum (BAlq) as acceptor. Strong photoluminescence quenching of m-MTDATA by BAlq is observed manifesting the efficient photoinduced charge transfer occurs between m-MTDATA and BAlq. The optimized device exhibits a photocurrent of 172 μA/cm² at ?14 V under an illumination of 365 nm UV light irradiation with an intensity of 0.691 mW/cm², corresponding to a responsivity of 248 mA/W. We attribute the high response to the efficient electron transfer from the donor to the acceptor, the feasible level alignment match and the high carrier mobility of photoresponsive materials.     

H2S-Activated Ion-Interference Therapy: A Novel Tumor Targeted Therapy Based on Copper-Overload-Mediated Cuproptosis and Pyroptosis

Copper overload is a novel way to achieve copper-ion-interference therapy by disrupting copper homeostasis and treating diseases through multiple cell death pathways. However, it is difficult to reach copper overload since excess intracellular copper ions will be pumped out. Herein, copper overload is achieved by both raising cellular uptake and reducing the efflux of copper ions using hydrogen sulfide (H₂S)-responsive copper hydroxyphosphate nanoparticles (Cu₂(PO₄)(OH) NPs). After immersion in an H₂S-enriched colon cancer microenvironment, Cu₂(PO₄)(OH) NPs can transform into copper sulfide NPs with reduced size for higher cell entering, resulting in improved Fenton activity as well as copper ion dissociation. Reactive oxygen species generated by the Fenton reaction not only activate inflammasomes and Caspase-1 proteins, cause the cleavage of gasdermin D to induce pyroptosis, but also affect mitochondrial function and down-regulate copper exporter ATP7A to further reduce the copper excretion. The combination of higher endocytosis and lower exportation leads to maximized copper overload. Together with the efficient copper ions release, mitochondrial tricarboxylic acid cycle can be disrupted and iron-sulfur cluster proteins are downregulated, ultimately triggering cuproptosis. As both pyroptosis and cuproptosis are efficient ways to induce cell death, this study provides a novel way to realize effective tumor-targeted therapy based on H₂S-activated copper overload with simple Cu₂(PO₄)(OH) NPs.     

Scalable Gaussian Normal Basis Multipliers over GF(2<Superscript><Emphasis Type=Italic>m</Emphasis></Superscript>) Using Hankel Matrix-Vector Representation

This work presents a novel scalable multiplication algorithm for a type-t Gaussian normal basis (GNB) of GF(2^m). Utilizing the basic characteristics of MSD-first and LSD-first schemes with d-bit digit size, the GNB multiplication can be decomposed into n(n + 1) Hankel matrix-vector multiplications. where n = (mt + 1)/d. The proposed scalable architectures for computing GNB multiplication comprise of one d × d Hankel multiplier, four registers and one final reduction polynomial circuit. Using the relationship of the basis conversion from the GNB to the normal basis, we also present the modified scalable multiplier which requires only nk Hankel multiplications, where k = mt/2d if m is even or k = (mt − t + 2)/2d if m is odd. The developed scalable multipliers have the feature of scalability. It is shown that, as the selected digit size d ≥ 8, the proposed scalable architectures have significantly lower time-area complexity than existing digit-serial multipliers. Moreover, the proposed architectures have the features of regularity, modularity, and local interconnection ability. Accordingly, they are well suited for VLSI implementation.     

特种加工线切割机床智能渐进式走丝控制方案及控制器硬件电路设计

针对特种加工设备中走丝线切割机床升级改造需求大,成本高的问题,提出了一种低成本的设备改造方案。在不增加硬件投资的前提下,提出了精粗加工渐进使用电极丝的改造方案,并设计出智能渐进走丝控制器的硬件电路原理图和PCB板。通过与相关厂家的合作改造表明,该智能渐进走丝控制方案和硬件电路能够最大限度的降低改造成本,并能提升机床的加工精度、表面光洁度和加工的一致性。     

电流控制模式Boost电路分岔的数值分析

研究了电流模式下Boost DC/DC变换器,以电感电流作为分岔参数的分岔混沌现象,通过数值计算得出不同电容值下的分岔图,从而验证了理论分析的可靠性。     

A lightweight,self‐adaptive lock gate designation scheme for data collection in long‐thin wireless sensor networks

Constrained by the physical environments, the long‐thin topology has recently been promoted for many practical deployments of wireless sensor networks (WSNs). In general, a long‐thin topology is composed of a number of long branches of sensor nodes, where along a branch each sensor node has only one potential parent node toward the sink node. Although data aggregation may alleviate excessive packet contention, the maximum payload size of a packet and the dynamically changing traffic loads may severely affect the amount of sensor readings that may be collected along a long branch of sensor nodes. In addition, many practical applications of long‐thin WSNs demand the exact sensor readings at each location along the deployment areas for monitoring and analysis purposes, so sensor readings may not be aggregated when they are collected. This paper proposes a lightweight, self‐adaptive scheme that designates multiple collection nodes, termed lock gates, along a long‐thin network to collect sensor readings sent from their respective upstream sensor nodes. The self‐adaptive lock gate designation scheme balances between the responsiveness and the congestion of data collection while mitigating the funneling effect. The scheme also dynamically adapts the designation of lock gates to accommodate the time‐varying sensor reading generation rates of different sensor nodes. A testbed of 100 Jennic sensor nodes is developed to demonstrate the effectiveness of the proposed lock gate designation scheme. Copyright © 2011 John Wiley & Sons, Ltd.     

软件测试方法和策略

在软件开发的过程中，人们使用了许多保证软件质量的方法、设计和实现软件，但难免还会在工作中犯猎误。这样，在软件产品中就会隐藏许多错误和缺陷。对于规模大、复杂性高的软件更是如此。结合在软件测评中的工作体会，介绍了软件测试的目的和原则、软件的几种测试方法，探讨了软件测试的策略。     

等离子体激励对飞行器流场影响的数值研究

针对传统飞行器控制方式的缺点,采用小尺度等离子体流动控制技术对飞行器流场影响进行研究。在前人的实验模型及飞行参数进行研究的基础上建立三维模型,采用数值仿真方法,研究了等离子体激励器位置和注入能量大小对飞行器流场及表面压力分布的影响。仿真结果表明：等离子体与边界层的相互作用可改变飞行器外部激波的初始结构,并在激励位置附近形成局部高压区;随着注入能量的增加,高压区峰值及作用范围分别扩大;等离子体激励产生的扰动具有三维传播特性,对飞行器侧壁面甚至对整个壁面周向压力分布产生影响。     

硅薄膜矩形空芯波导太阳能电池光捕获性能的研究

为提高薄膜电池对光的捕获能力, 将平面硅薄膜电池制 作成矩形空芯波导结构,对其太阳光注入方式、光捕获能力和光-电转换效能进行了理论和 实验探讨。基于 多层膜反射理论和波导反射模型对波导电池光捕获效果的预测表明,波导电池能够将入射光 限制在空芯结 构内多次反射和吸收,具有较平面电池更高的光捕获能力。测定了不同平行光束在不同入射角度 下平面和波导 电池的光捕获功率和光-电转换效能的结果表明,波导电池对入射光功率近似全部捕获,其 光-电功率转换效能 较对应的平面电池有3～5倍的提升。对不同截面尺寸和长度的单结空芯波导电池光捕获率 进行了计算,提 出从电池膜层结构和空芯几何尺寸参数优化硅薄膜矩形空芯波导电池的思路,通过优化有 望实现用小于多结平面电池外形尺寸的单结空芯波导电池达到更好的光捕获效果。     

双线性插值在地磁导航中的应用

地磁导航应用中常采用插值运算来提高地磁图的精度,但目前常用的地磁图插值方法都存在计算复杂、不适于实时解算等缺点。提出用双线性插值方法进行地磁图插值,该方法原理简单、计算量小,且适于在微处理器上实时解算,为地磁导航的工程实现提供了参考。