打印层厚度对FDM薄板固有特性的影响

针对不同打印层厚度对熔融沉积成型(fused deposition modeling,简称FDM)薄板固有特性的影响规律及相应的机理进行了研究。首先,以悬臂边界条件下的FDM薄板为研究对象,创建了固有特性理论模型;其次,完成了薄板样件的制备,同时搭建了样件的动力学测试系统,实验研究了样件的固有特性参数;最后,对比分析理论与实验结果,以验证理论模型的正确性。研究结果表明,所建模型可以准确预测FDM薄板结构的固有特征参数;打印层越厚,样件的固有频率越高,但其模态振型不会随着打印层厚度的变化而变化。该研究为提高FDM产品动力学性能提供了理论基础和技术支持。     

Microstructure investigation and thermal stability of 99.1% aluminum processed by equal channel angular extrusion

Microstructure evolution of 99.1% aluminum after equal-channel angular extrusion (ECAE) and subsequent heat-treatment was investigated. After deformation the samples were annealed at different temperatures. The deformed and annealed states were characterized by Transmission Electron Microscopy (TEM), X-ray diffraction (XRD), and microhardness tests. It was shown that the observed microstructure changes during subsequent annealing have to be associated with recovery and cells formation. The initial stages of recovery were investigated using weak-beam technique. The microstructure obtained after annealing for 1 h at 100 °C consists of some arrangements of the dislocations into sub-grain boundaries within the wide preexisting grains. Annealing at 300 °C led to the appearance of a duplex microstructure consisting of bands of slightly coarsened grains associated with refined grains. No growth of dislocation cells was observed up to 400 °C. In XRD measurements, the lattice parameter increase with subsequent heating. This indicates a continuous grain growth during annealing. This is due to the important increase of coherency length, D observed parallel to a substantial decrease of rms-strain, ε.     

Examining the consistency of products derived from various ocean color sensors in open ocean (Case 1) waters in the perspective of a multi-sensor approach

During its lifetime, a space-borne ocean color sensor provides world-wide information about important biogeochemical properties of the upper ocean every 2 to 4 days in cloudless regions. Merging simultaneous or complementary data from such sensors to obtain better spatial and temporal coverage is a recurring objective, but it can only be reached if the consistency of the sensor-specific products, as delivered by the various Space Agencies, has first been carefully examined. The goal of the present study is to provide a procedure for establishing a coherency of open ocean (Case-1 waters) data products, for which the various data processing methods are sufficiently similar. The development of the procedure includes a detailed comparison of the marine algorithms used (after atmospheric corrections) by space agencies for the production of standard products, such as the chlorophyll concentration, [Chl], and the diffuse attenuation coefficient, K_d. The MODIS-Aqua, SeaWiFS and MERIS [Chl] products agree over a wide range, between ∼ 0.1 and 3 mg m^− 3, whereas increasing divergences occur for oligotrophic waters ([Chl] (from 0.02 to 0.09 mg m^− 3). For the K_d(490) coefficient, different algorithms are in use, with differing results. Based on a semi-analytical reflectance model and hyperspectral approach, the present work proposes a harmonization of the algorithms allowing the products of the various sensors to be comparable, and ultimately, meaningfully merged (the merging procedures themselves are not examined). Additional potential products, obtained by using [Chl] as an intermediate tool, are also examined and proposed. These products include the thickness of the layer heated by the sun, the depth of the euphotic zone, and the Secchi disk depth. The physical limitations in the predictive skill of such downward extrapolations, made from information concerning only the upper layer, are stressed.     

The role of microcrystalline structure on optical scattering characteristics of semi-crystalline thermoplastics and the accuracy of numerical input for IR-heating modeling

Infrared (IR) heating is widely used for thermoforming of thermoplastic polymers. The key benefit of radiation heating is that a significant amount of the radiative energy penetrates into the polymers thanks to their semi-transparency. For the case of heating unfilled semi-crystalline polymers, the relation between their microcrystalline structure and optical properties is the key to develop a predictive IR-heating model as microcrystalline structure introduces an optically heterogeneous medium. In this study, a relation between the microcrystalline structure of a polyethylene (PE) and its effect on the thermo-optical properties was experimentally analyzed considering a two-step analysis. At very first step, the relation was analyzed considering samples with identical thicknesses and different morphologies, characterized here in terms of degree of crystallinity (X_c (%)). Using Fourier Transform Infrared (FT-IR) spectroscopy and integrating sphere, optical characteristics of the PE samples were analyzed in near-infrared (NIR) and middle-infrared (MIR) spectral ranges. The analyses showed that a slight variation in X_c (%) has a great effect on the optical characteristics of PE, particularly the transmission characteristics in NIR range. The wavelength-dependent effect of X_c (%) on the transmission behaviors opened a discussion about the fact that the microcrystalline structures -in particular spherulites or their substructures such as lamellae- are responsible for optical scattering. Using the optical properties obtained from the two-step experimental analyses, two different thermo-optical properties were calculated, namely extinction and absorption coefficients, and used as a numerical input for the parametric numerical studies. The numerical studies were performed using an in-house developed radiation heat transfer algorithm -RAYHEAT-. Both the experimental and numerical analyses demonstrated the importance of the optical scattering regarding the identification of thermo-optical properties, used as a numerical input for radiation heat transfer models.     

Apolipoprotein E,a Crucial Cellular Protein in the Lifecycle of Hepatitis Viruses

Apolipoprotein E (ApoE) is a multifunctional protein expressed in several tissues, including those of the liver. This lipoprotein component is responsible for maintaining lipid content homeostasis at the plasma and tissue levels by transporting lipids between the liver and peripheral tissues. The ability of ApoE to interact with host-cell surface receptors and its involvement in several cellular pathways raised questions about the hijacking of ApoE by hepatotropic viruses. Hepatitis C virus (HCV) was the first hepatitis virus reported to be dependent on ApoE for the completion of its lifecycle, with ApoE being part of the viral particle, mediating its entry into host cells and contributing to viral morphogenesis. Recent studies of the hepatitis B virus (HBV) lifecycle have revealed that this virus and its subviral envelope particles also incorporate ApoE. ApoE favors HBV entry and is crucial for the morphogenesis of infectious particles, through its interaction with HBV envelope glycoproteins. This review summarizes the data highlighting the crucial role of ApoE in the lifecycles of HBV and HCV and discusses its potential role in the lifecycle of other hepatotropic viruses.     

Road safety risk evaluation and target setting using data envelopment analysis and its extensions

Currently, comparison between countries in terms of their road safety performance is widely conducted in order to better understand one's own safety situation and to learn from those best-performing countries by indicating practical targets and formulating action programmes. In this respect, crash data such as the number of road fatalities and casualties are mostly investigated. However, the absolute numbers are not directly comparable between countries. Therefore, the concept of risk, which is defined as the ratio of road safety outcomes and some measure of exposure (e.g., the population size, the number of registered vehicles, or distance travelled), is often used in the context of benchmarking. Nevertheless, these risk indicators are not consistent in most cases. In other words, countries may have different evaluation results or ranking positions using different exposure information. In this study, data envelopment analysis (DEA) as a performance measurement technique is investigated to provide an overall perspective on a country's road safety situation, and further assess whether the road safety outcomes registered in a country correspond to the numbers that can be expected based on the level of exposure. In doing so, three model extensions are considered, which are the DEA based road safety model (DEA-RS), the cross-efficiency method, and the categorical DEA model. Using the measures of exposure to risk as the model's input and the number of road fatalities as output, an overall road safety efficiency score is computed for the 27 European Union (EU) countries based on the DEA-RS model, and the ranking of countries in accordance with their cross-efficiency scores is evaluated. Furthermore, after applying clustering analysis to group countries with inherent similarity in their practices, the categorical DEA-RS model is adopted to identify best-performing and underperforming countries in each cluster, as well as the reference sets or benchmarks for those underperforming ones. More importantly, the extent to which each reference set could be learned from is specified, and practical yet challenging targets are given for each underperforming country, which enables policymakers to recognize the gap with those best-performing countries and further develop their own road safety policy.     

Understanding of the annealing temperature impact on ion implanted bifacial n‐type solar cells to reach 20.3% efficiency

Ion implantation has the advantage of being a unidirectional doping technique. Unlike gaseous diffusion, this characteristic highlights strong possibilities to simplify solar cell process flows. The use of ion implantation doping for n‐type PERT bifacial solar cells is a promising process, but mainly if it goes with a unique co‐annealing step to activate both dopants and to grow a SiO₂ passivation layer. To develop this process and our SONIA cells, we studied the impact of the annealing temperature and that of the passivation layers on the electrical quality of the implanted B‐emitter and P‐BSF. A high annealing temperature (above 1000 °C) was necessary to fully activate the boron atoms and to anneal the implantation damages. Low J_0BSF (BSF contribution to the saturation current density) of 180 fA/cm² was reached at this high temperature with the best SiO₂ passivation layer. An average efficiency of 19.7% was reached using this simplified process flow (“co‐anneal process”) on large area (239 cm²) Cz solar cells. The efficiency was limited by a low FF, probably due to contaminations by metallization pastes. Improved performances were achieved in the case of a “separated anneals” process where the P‐BSF is activated at a lower temperature range. An average efficiency of 20.2% was obtained in this case, with a 20.3% certified cell. Copyright © 2014 John Wiley & Sons, Ltd.     

Tyrosine-dependent and -independent mechanisms of STAT3 activation by the human granulocyte colony-stimulating factor (G-CSF) receptor are differentially utilized depending on G-CSF concentration

The granulocyte colony-stimulating factor receptor (G-CSF-R) activates multiple STAT proteins. Although the membrane-proximal cytoplasmic region of the G-CSF-R is necessary and sufficient for activation of STAT1 and STAT5, activation of STAT3 requires the membrane distal region that contains four tyrosines. Although one of these (Y704) has previously been shown to be involved in STAT3 activation from a truncated G-CSF-R derived from a patient with severe chronic neutropenia (SCN), this tyrosine is not required for STAT3 activation by the full-length G-CSF-R. To investigate possible alternative mechanisms of STAT3 activation, we generated a series of Ba/F3 cell transfectants expressing the wild-type G-CSF-R or mutant receptors that either completely lack tyrosines or retain just one of the four cytoplasmic tyrosines of the G-CSF-R. We show that, at saturating G-CSF concentrations, STAT3 activation from the full-length G-CSF-R is efficiently mediated by the C-terminal domain in a manner independent of receptor tyrosines. In contrast, at low G-CSF concentrations, Y704 and Y744 of the G-CSF-R play a major role in STAT3 activation. Both tyrosine-dependent and -independent mechanisms of STAT3 activation are sensitive to the Jak2 inhibitor AG-490, follow similar kinetics, and lead to transactivation of a STAT3 reporter construct, indicating functional equivalence. STAT3 activation is also impaired, particularly at nonsaturating G-CSF concentrations, in bone marrow cells from mice expressing a truncated G-CSF-R (gcsfr-triangle up715). These findings suggest that G-CSF-induced STAT3 activation during basal granulopoiesis (low G-CSF) and "emergency" granulopoiesis (high G-CSF) are differentially controlled. In addition, the data establish the importance of the G-CSF-R C-terminus in STAT3 activation in primary cells, which has implications for understanding why truncated G-CSF-R derived from SCN patients are defective in maturation signaling.     

N,N′-alkylated Imidazolium-Derivatives Act as Quorum-Sensing Inhibitors Targeting the Pectobacterium atrosepticum-Induced Symptoms on Potato Tubers

Bacteria belonging to the Pectobacterium genus are the causative agents of the blackleg and soft-rot diseases that affect potato plants and tubers worldwide. In Pectobacterium, the expression of the virulence genes is controlled by quorum-sensing (QS) and N-acylhomoserine lactones (AHLs). In this work, we screened a chemical library of QS-inhibitors (QSIs) and AHL-analogs to find novel QSIs targeting the virulence of Pectobacterium. Four N,N′-bisalkylated imidazolium salts were identified as QSIs; they were active at the μM range. In potato tuber assays, two of them were able to decrease the severity of the symptoms provoked by P. atrosepticum. This work extends the range of the QSIs acting on the Pectobacterium-induced soft-rot disease.     

Preparation of transparent PMMA/Fe(IO3)3 nanocomposite films from microemulsion polymerization

Polymethyl methacrylate (PMMA)/Fe(IO₃)₃ nanocomposite thin films are obtained by in situ particle generation in microemulsions and subsequent photopolymerization of a mixture containing methyl methacrylate, trimethylolpropane triacrylate, and crystallized iron iodate (Fe(IO₃)₃) nanorods. Hyper‐Rayleigh scattering measurements combined with X‐ray diffraction, transmission electron microscopy, and dynamic light scattering are first used to probe in situ the crystallization kinetics of iron iodate nanorods in water‐in‐oil microemulsions prepared with methyl methacrylate as the oil phase and marlophen NP12 as a surfactant. Trimethylolpropane triacrylate is then added as a crosslinker before spin‐coating. Films are deposited on glass substrates for the nonlinear optical characterizations and on silicon wafers for the piezoelectric and mechanical measurements. Nanocomposite films treated by corona discharge are finally characterized through optical microscopy, laser Doppler vibrometry, and Brillouin spectroscopy. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1203‐1211, 2013