碰撞检测算法在三维游戏设计中的应用与研究

完美的3D游戏体验是游戏制作者与玩家所共同追求的,它不仅指的是游戏场景的华丽绚烂,游戏情节的跌宕起伏;还要看它虚拟现实的功能有多强。而这其中最需要解决的一个很重要的问题就是在游戏场景中虚拟物体之间相交碰撞的检测和处理,检测处理的精确性、实时性将直接决定一款游戏的在游戏情节的实现上是否合理以及虚拟现实的仿真程度如何。本文将重点阐述作者在三维游戏设计中关于碰撞检测技术应用研究的一些想法。     

ATM视频传输中信元丢失的分析与对策

ＡＴＭ的出现使得我们能够实时地,高效地传输视频信号,但同时在传输过程中ＡＴＭ的信元丢失将是导致解压缩后的图像质量严重下降。文章首先基于ＭＰＥＧ－２标准,给出了一个基本的视频通信系统框架及各部分的码流格式,然后分析了系统中信元丢失的原因,特点和影响。文中给出了现有的各种减少信元丢失的方法及其如何隐藏信元丢失对图像质量造成的影响,分析其优质和适用场合,并讨论了以后的研究方向。     

透明液晶薄膜旋光色散特性研究

以透明塑料为基板,将液晶薄膜均匀涂于其上制成透明的具有旋光性的薄片,并用自行研制的旋光色散装置,对所制薄片的旋光色散特性进行了研究,测试结果显示其具有很大的旋光性.同时,用玻尔兹曼方程进行了理论拟合,发现拟合结果与实验结果有着极好的符合。     

A Hetero-Layered,Mechanically Reinforced,Ultra-Lightweight Composite Polymer Electrolyte for Wide-Temperature-Range,Solid-State Sodium Batteries

The practical use of polyethylene oxide polymer electrolyte in the solid-state sodium metallic batteries (SSMBs) suffers from the retard Na⁺ diffusion at the room temperature, mechanical fragility as well as the oxidation tendency at high voltages. Herein, a hetero-layered composite polymeric electrolyte (CPE) is proposed to enable the simultaneous interfacial stability with the high voltage cathodes (till 4.2 V) and Na metallic anode. Being incorporated within the polymer matrix, the sand-milled Na₃Zr₂Si₂PO₁₂ nanofillers and nanocellulose scaffold collectively endow the thin-layer (25 µm), ultralightweight (1.65 mg cm⁻²) CPE formation with an order of magnitude enhancement of the mechanical strength (13.84 MPa) and ionic conductivity (1.62 × 10⁻⁴ S cm⁻¹) as compared to the pristine polymer electrolyte, more importantly, the improved dimension stability up to 180 °C. Upon the integration of the hetero-layered CPE with the iron hexacyanoferrate FeHCF cathode (1 mAh cm⁻²) and the Na foil, the cell model can achieve the room-temperature cycling stability (93.73% capacity retention for 200 cycles) as well as the high temperature tolerance till 80 °C, which inspires a quantum leap toward the surface-wetting-agent-free, energy-dense, wide-temperature-range SSMB prototyping.     

Lithiation-Induced Defect Engineering to Promote Oxygen Evolution Reaction

Exploring efficient electrocatalysts for oxygen evolution reaction (OER) is an urgent need to advance the development of sustainable energy conversion. Though defect engineering is considered an effective strategy to regulate catalyst activity for enhanced OER performance, the controllable synthesis of defective oxides electrocatalysts remains challenging. Here, oxygen defects are introduced into NiCo₂O₄ nanorods by an electrochemical lithiation strategy. By tuning in situ lithiation potentials, the concentration of oxygen defects and the corresponding catalytic activity can be feasibly regulated. In addition, the relationship between the changes in the defect density and electronic structure and the lithiation cut-off voltages is revealed. The results show that NiCo₂O₄ nanorods undertook intercalation and two-step conversion reaction, in which the lithiation-induced conversion reaction gives rise to a CoO@NiO-based structure with higher defect density and lower oxidation states. As a result, the defective CoO@NiO-based catalyst exhibits exceptional OER activity with an overpotential of 270 mV at 10 mA cm⁻², which is about 74 mV below the pristine nanomaterials. This research proposes a novel strategy to explore high-performance catalysts with structural stability and defect control.     

An Efficient Multi-Path Self-Organizing Strategy in Internet of Things

In order to improve the organizing performance and fault tolerance of the wireless network protocol GEAR based on the geographical location information in the Internet of things and achieve better energy distribution and conservation effects. This paper proposes a new multipath routing organizing protocol (SMG, Self-organized Multipath GEAR) based on the basic geographic routing protocol GEAR. By two-step organizing, communication empty nodes and communication hole can join the network respectively and energy spreading out and mechanism of dormancy of the multi-path are utilized to spread out and save energy. Meanwhile, this paper presents an approximate estimation algorithm to estimate the number of the nodes in the monitoring region with a certain size and regular shape. The critical path node goes to failure in different times while received packet rate is monitored using the experiment of NS2 simulation and actual hardware. The experiment results show that the improved protocol increases the fault tolerance of the network, reduces the paralysis rate of the network and achieves the effect of energy spreading out and saving, increases the lifetime of the network through a multi-path strategy.     

微型光机电系统及其制作

微型光机电系统 (MOEMS)是将微光学、微电子和微机械系统结合发展出一种新型、宽广的应用领域 ,从早期的分立光学元件与电子电路向独立完整的光学系统发展。阐述了实现MOEMS的 2种技术手段 :光波导和微型光学平台的原理、制作工艺和关键技术 ,在此基础上概要介绍了几种典型的MOEMS系统。最后对其的发展作了展望。     

3300V 4H-SiC MOSFET 设计与加工

成功设计并制造了击穿电压超过3300V 的4H-SiC MOSFET。通过数字仿真优化了漂移层和DMOSFET有源区参数。漂移层N型外延厚度为33微米并且掺杂浓度为2.5E15cm-3。器件采用浮空场限制环作为终端。当栅极电压为20V,漏极电压为2.5V时,漏极电流为5A。     

安徽省电信宽带城域网的几种业务

本介绍了安徽电信宽带IP城域网可以开展的几种主要接入业务，并对几种业务的实现方式进行说明。     

Property of Self-Similarity Between Baseband and Modulated Signals

Mobile Networks and Applications - The increment of communication technologies and the development of signal processing require efficient identification techniques for communication...