pH Responsive Abelmoschus esculentus Mucilage and Administration of Methotrexate: In-Vitro Antitumor and In-Vivo Toxicity Evaluation

The rapid progression in biomaterial nanotechnology apprehends the potential of non-toxic and potent polysaccharide delivery modules to overcome oral chemotherapeutic challenges. The present study is aimed to design, fabricate and characterize polysaccharide nanoparticles for methotrexate (MTX) delivery. The nanoparticles (NPs) were prepared by Abelmoschus esculentus mucilage (AEM) and chitosan (CS) by the modified coacervation method, followed by ultra-sonification. The NPs showed much better pharmaceutical properties with a spherical shape and smooth surface of 213.4–254.2 nm with PDI ranging between 0.279–0.485 size with entrapment efficiency varying from 42.08 ± 1.2 to 72.23 ± 2.0. The results revealed NPs to possess positive zeta potential and a low polydispersity index (PDI). The in-vitro drug release showed a sustained release of the drug up to 32 h with pH-dependence. Blank AEM -CS NPs showed no in-vivo toxicity for a time duration of 14 days, accompanied by high cytotoxic effects of optimized MTX loaded NPs against MCF-7 and MD-MBA231 cells by MTT assay. In conclusion, the findings advocated the therapeutic potential of AEM/CS NPs as an efficacious tool, offering a new perspective for pH-responsive routing of anticancer drugs with tumor cells as a target.     

Physicochemical,mineralogy,and thermo-kinetic characterisation of newly discovered Nigerian coals under pyrolysis and combustion conditions

In this study,the physicochemical,microstructural,mineralogical,thermal,and kinetic properties of three newly discovered coals from Akunza (AKZ),Ome (OME),and S...     

Incremental gravitational search algorithm for high-dimensional benchmark functions

Neural Computing and Applications - In this study, gravitational search algorithm (GSA), which is a powerful optimization algorithm developed in recent years and based on physics, is improved by...     

Friction factor correlation and pressure loss of single-phase flow inside herringbone microfin tubes

Pressure drop of single-phase turbulent flow inside herringbone microfin tubes of different fin dimensions has been measured experimentally to develop a general correlation of single-phase friction factor for the herringbone tubes. Water has been used as a working fluid and the mass flow rate has been varied from 0.03 to 0.2 kg/s, where the Reynolds number range is 10⁴ to 6.5 × 10⁴. Comparison of experimental data of the herringbone microfin tubes with those of helical microfin and smooth tubes shows that pressure drop of the herringbone tube is significantly higher than the helical and smooth tubes depending on the fin geometric parameters and mass velocity of the working fluid. Through semi-analytical approach and using the present experimental data, a new correlation of single-phase friction factor for the herringbone microfin tubes has been proposed incorporating the effects of fin geometric parameters. The proposed correlation can predict the experimental data within ±10%.     

Electromagnetic scattering from nonlinear anisotropic cylinders. I.Fundamental frequency

The solution of the problem of electromagnetic scattering of obliquely incident plane waves by homogeneous, nonlinear anisotropic cylindrical structures is obtained. The medium of the scatterer is characterized by Volterra-type integrals for the electric and magnetic flux density vectors D and B, respectively. The nonlinear problem is solved using the perturbation method. The effects of nonlinearities on the field properties both inside and outside the scatterer, together with the effect on the radar cross section, are investigated for the fundamental frequency components. To demonstrate the validity of the approach, the results obtained by the perturbation method are compared with those obtained using the plane wave representation method of D. Censor (1983), where the iteration method is used to solve the resulting dispersion equation. The results are in very good agreement in both amplitude and phase of the fields for the case of very weak nonlinearity. When the relative magnitude of the nonlinear component of the permittivity is increased, the iteration method shows a faster divergence of the phase from the linear phase     

Effect of Lateral Water Surface Profile on Side Weir Discharge

The average water surface slope in the lateral direction is taken into account as a local parameter ψ to study flow over a side weir. It was later shown that for smaller side weir lengths and side weir portions with no entrance and exit transition effects, ψ can be obtained from a numerical integral and also from the measurements of water surface elevations in the lateral direction. The effect of elemental weir length was further determined. Dividing the weir length into smaller computational segments has the effect of lowering the water surface to approach the measured profile, the downstream ends being coincident. The model was verified using experimental data.     

Epoxide functionalized γ-Al2O3/Fe3O4/SiO2 nanocomposite and comparative adsorption behavior of a model reactive azo dye

In this investigation, magnetic γ-Al₂O₃ nanocomposite polymer particles with epoxide functionality were prepared following a multistep process. The prepared nanocomposite polymer particle was named as γ-Al₂O₃/Fe₃O₄/SiO₂/poly(glycidyl methacrylate (PGMA). The surface property was evaluated by carrying out the adsorption study of Remazol Navy RGB (RN), a model reactive azo dye, on both γ-Al₂O₃/Fe₃O₄/SiO₂ and γ-Al₂O₃/Fe₃O₄/SiO₂/PGMA nanocomposite particles, that is, before and after epoxide functionalization. A contact time, temperature, adsorbent dose, and dye concentration dependent change in adsorption behavior was observed on both nanocomposite particles. The adsorption amount reached equilibrium (q_e) value within 5 minutes at the respective point of zero charge (PZC). The adsorption density of RN per unit specific surface area on epoxide functional γ-Al₂O₃/Fe₃O₄/SiO₂/PGMA nanocomposite polymer particles (1.30 mg/m²) was higher relative to that on γ-Al₂O₃/Fe₃O₄/SiO₂ nanocomposite particles (0.87 mg/m²). The optimum adsorbent dose for obtaining the maximum adsorption density was 0.01 g. Comparatively, Langmuir isotherm model was better to describe the adsorption process and the adsorption process was favorable at low temperature (283 K). Batch kinetic adsorption experiment suggested that a pseudo-second-order rate kinetic model is more appropriate. Nanocomposite polymer particles were used as adsorbent up to third cycle with almost 99% adsorption efficiency.     

Preparation and properties of modified graphene oxide incorporated waterborne polyurethane acrylate

In this study, a new modifier (KPG) was prepared by modifying graphene oxide with γ‐glycidoxypropyl trimethoxysilane (KH560) and polydimethylsiloxane (PDMS). KPG was in turn added to aqueous urethane acrylate for the fabrication of waterborne polyurethane polyacrylate emulsion modified with KH560‐PDMS composite (KPG/WPUA). Textural characterizations of the KPG/WPUA coating were achieved via Fourier transform infrared, SEM, TGA and AFM techniques, which revealed that the KPG/WPUA film possessed a smooth surface. The synthesized KPG/WPUA films were tested for mechanical properties, hydrophobicity and acid/water corrosion performance which suggested their highly hydrophobic surface. KPG/WPUA with 0.1% KPG showed a contact angle of 118.35°, 30.35° higher than that of pristine WPUA. The KPG/WPUA film exhibited higher thermal stability, i.e. a 5% weight loss temperature of 305 °C, which was 30 °C higher than that of pristine WPUA film. The Young's modulus and elongation at break of the KPG/WPUA film were 34.1 MPa and 74.88% respectively, which were higher than that of WPUA film. Furthermore, KPG/WPUA films exhibited greater resistance (without obvious blistering and the white spotting phenomenon) to H₂O₂, HCl and water corrosion than pristine WPUA. The superior performance of KPG/WPUA films was attributed to the network chain structure formed upon the introduction of KPG into WPUA. The outstanding performance of KPG/WPUA films in terms of mechanical properties, thermal stability and high resistance to acidic and water corrosion makes them interesting alternative contenders for target applications. © 2019 Society of Chemical Industry     

A green separation process for recovery of healthy oil from pumpkin seed

In this study, pumpkin seeds, called as “Ürgüp Sivrisi” and grown in Cappadocia region, were used as plant materials because of high aroma contents. In the supercritical fluid extraction of pumpkin seed oil, the effect of main process parameters as the particle size (250-2360 μm), the volumetric flow rate of supercritical solvent (0.06-0.30 L/h), the operating pressure (20-50 MPa), the operating temperature (40-70 °C), the type of entrainer (ethanol and n-hexane) and those concentrations (0-10 vol.%) on the extraction yield, the oil solubility and the initial extraction rate were investigated. A cross-over effect for the extraction of pumpkin seed oil using supercritical CO₂ was determined at the operating pressure of 20-30 MPa. The maximum extraction yield obtained with entrainer free was reached 0.50 g oil/g dry seed at 600-1180 μm, 0.12 L/h, 50 MPa and 70 °C for the operation time of 5 h. The maximum extraction yield obtained with ethanol as an entrainer in the experiments was reached 0.54 g oil/g dry seed at the conditions of 600-1180 μm, 0.12 L/h, 30 MPa, 40 °C and 8 vol.% for the operating time of 2 h. The oil compositions were determined by gas chromatography analysis and the results showed that the compositions of pumpkin seed oil which were obtained by means of organic solvent extraction and supercritical fluid extraction were similar. The average oil compositions determined as 9.3 (±0.43)% palmitic acid, 7.5 (±0.6)% stearic acid, 32.3 (±0.6)% oleic acid, 48.1 (±0.6)% linoleic acid and 0.7 (±0.3)% linolenic acid. The morphological changes in the seeds were determined by the scanning electron microscopy analysis.     

Effects of nanoclay and coupling agent on the physico‐mechanical,morphological, and thermal properties of wood flour/polypropylene composites

This article presents the effects of coupling agent and nanoclay (NC) on some properties of wood flour/polypropylene composites. The composites with different NC and maleic anhydride grafted polypropylene (MAPP) contents were fabricated by melt compounding in a twin‐screw extruder and then by injection molding. The mass ratio of the wood flour to polymer was 40/60 (w/w). Results showed that applying MAPP on the surface of the wood flour can promote filler polymer interaction, which, in turn, would improve mechanical properties of the composite as well as its water uptake and thermal stability. Composite voids and the lumens of the fibers were filled with NC, which prevented the penetration of water by the capillary action into the deeper parts of composite. Therefore, the water absorption in composites fabricated using NC was significantly reduced. Scanning electron microscopy has shown that the treatment of composites with 5 wt% MAPP, promotes better fiber–matrix interaction, resulting in a few numbers of pull‐out traces. In all cases, the degradation temperatures shifted to higher values after using MAPP. The largest improvement on the thermal stability of composites was achieved when NC was added. POLYM. ENG. SCI., 2011. © 2010 Society of Plastics Engineers