Teleost fish scales: a unique biological model for the fabrication of materials for corneal stroma regeneration

The corneal stroma is composed of multiple lamellae, each containing closely packed collagen fibrils. The orientation of fibrils in a lamella is parallel, but those in different lamellae are orthogonal. As a result, the corneal stroma has a characteristic orthogonal plywood-like structure. Such a highly-regulated three-dimensional arrangement of collagen fibrils gives strength and transparency to the corneal stroma, but it also presents a challenge in the fabrication of materials to replace it. A bioinspired technology is required to process such materials, but the regulatory mechanism of collagen-fibril orientation is still unknown. The low regenerating activity of the corneal stroma seems to be a major factor preventing progress in this field of research. A similarly highly-ordered arrangement of collagen fibrils can be seen in the basal plates of teleost fish scales. Moreover, the scales have high regenerating ability. When a scale is mechanically lost, a new scale is rapidly regenerated. The cells that produce the basal plates are extremely activated; thus, production of the highly-ordered collagen fibrils is very rapid. Therefore, the regenerating scales should be a uniquely helpful biological model for studying the regulatory mechanism of collagen-fibril orientation. Fish-scale collagen has another advantage for use as a biomaterial: the low probability of zoonotic infection. Therefore, scale collagen is a most promising biomaterial for fabricating three-dimensionally arranged collagen fibers to substitute for the corneal stroma. Three tasks that must be clarified for the bioinspired production of a corneal substitute from fish scale collagen are proposed.     

A study on the preparation of supported metal oxide catalysts using JRC-reference catalysts. I. Preparation of a molybdena–alumina catalyst. Part 4. Preparation parameters and impact index

The effects of the volume and pH of the impregnation solution and of the calcination conditions were examined on the physicochemical and catalytic properties of a 13 wt% MoO₃/Al₂O₃ extrudate catalyst. The Al₂O₃ support and drying procedures (static conditions without flowing air) were fixed in the preparations. In the present series of catalysts, the amount of crystalline MoO₃ was marginally small. It was found that the dispersion of Mo oxide species increased as the volume of the impregnation solution increased, gradually approaching a maximum value. The increase in pH (2–8) of the impregnation solution was found to reduce the dispersion of Mo oxide species. The Mo dispersion increased slightly for the impregnation catalysts as the calcination temperature increased (673–873 K), whereas it decreased for the equilibrium adsorption catalysts. The effects of the calcination atmosphere (with or without flowing air, or with flowing humid air) were very small on the dispersion of Mo oxide species under the present preparation conditions. On the other hand, the methanol oxidation activity of MoO₃/Al₂O₃ was sensitive to the preparation parameters examined here. It was demonstrated by means of EPMA and XPS that a considerable migration of Mo took place during the calcination.

In the present study on the preparation of a 13 wt% MoO₃/Al₂O₃ catalyst, an impact index is proposed to measure the magnitude of the effects of the respective parameter(s) on the physicochemical and catalytic properties. With the Mo dispersion, the effects of the preparation parameter decreased in the order, surface area of the support >> drying process > volume of the impregnation solution > pH, calcination temperature and atmosphere. The size of the impact index for the dispersion of Mo sulfide species is 70–75% of that for the Mo oxide species. The HDS activity of the catalyst was less affected by the preparation parameters than the Mo sulfide dispersion. The preparation parameters affected the segregation of Mo on the outer surface of extrudates in a decreasing order: drying process > volume of the impregnation solution > pH, calcination conditions. It was found that the oxidation of methanol was affected most intensely by the drying procedures. The volume of the impregnation solution, calcination conditions and pH of the impregnation solution also strongly affected the oxidation activity. The impact index suggests that the sensitivity to the preparation variables of the physicochemical and catalytic properties of MoO₃/Al₂O₃ decreases in the order, methanol oxidation activity > surface Mo segregation > Mo oxide dispersion > Mo sulfide dispersion > HDS activity.     

Selective detection method derived from a controlled diffusion process at metal-modified diamond electrodes

A novel, selective methodology is derived based on the difference between the diffusion processes at microelectrodes (i.e., hemispherical diffusion) and the macroelectrode (i.e., linear diffusion) in a metal-implanted boron-doped diamond electrode (metal-BDDs). As an example, the selective detection of glucose in a solution containing interference species such as ascorbic acid and uric acid is demonstrated. The electrochemical properties of BDD, which are low background current, extremely high stability, and (especially) inactivity toward glucose, play an important role in realizing these differences in the diffusion characteristics. The present methodology can be applied not only to selective glucose detection by the metal-BDD system but also to other selective detection systems.     

A Gate‐Current Model for Advanced MOSFET Technologies Implemented into HiSIM2

A gate leakage current model for advanced MOSFETs has been developed and implemented into the Hiroshima‐university STARC IGFET Model (HiSIM), the first complete surface‐potential‐based model. The model consists of four tunneling mechanisms, the gate to channel/bulk/source/drain, and requires totally 15 model parameters covering all bias conditions. Simulation results reproduce measurement for any device size and temperature without binning. Validity of the model has been tested with circuits that are sensitive to the change of stored charge due to tunneling current. Copyright © 2007 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Conformational change detection in nonmetal proteins by direct electrochemical oxidation using diamond electrodes

In this report, we established a new electrochemical method for the detection of conformational changes in large, non-metalloproteins such as bovine serum albumin, using flow injection analysis coupled with hydrogen-terminated, boron-doped diamond electrodes. The oxidation current was used as a signal reporter in the monitoring of urea-induced BSA denaturation. In the denatured state at high urea concentrations, the electrochemical signal increased, and the amperometric responses for the oxidation potential at 1300 mV were consistent with the results of conventional methods of denaturation monitoring using fluorescence spectroscopy. The oxidation involved at least five redox-active species (cysteine, tryptophan, tyrosine, methionine, and disulfide bonds). Furthermore, the method also showed high sensitivity for quantitative analysis of protein. A linear dynamic in the concentration range 50-400 microg/mL (r(2) = 0.977) with a lower detection limit of 190 ng/mL was achieved for BSA. Direct electrochemical detection of conformation changes of proteins using BDD electrodes can be performed with advantages in terms of simplicity and sensitivity.     

Early Fixation of Cobalt-Chromium Based Alloy Surgical Implants to Bone Using a Tissue-engineering Approach

To establish the methods of demonstrating early fixation of metal implants to bone, one side of a Cobalt-Chromium (CoCr) based alloy implant surface was seeded with rabbit marrow mesenchymal cells and the other side was left unseeded. The mesenchymal cells were further cultured in the presence of ascorbic acid, β-glycerophosphate and dexamethasone, resulting in the appearance of osteoblasts and bone matrix on the implant surface. Thus, we succeeded in generating tissue-engineered bone on one side of the CoCr implant. The CoCr implants were then implanted in rabbit bone defects. Three weeks after the implantation, evaluations of mechanical test, undecalcified histological section and electron microscope analysis were performed. Histological and electron microscope images of the tissue engineered surface exhibited abundant new bone formation. However, newly formed bone tissue was difficult to detect on the side without cell seeding. In the mechanical test, the mean values of pull-out forces were 77.15 N and 44.94 N for the tissue-engineered and non-cell-seeded surfaces, respectively. These findings indicate early bone fixation of the tissue-engineered CoCr surface just three weeks after implantation.     

Cloning and in vitro and in vivo expression of plant glutathione S-transferase zeta class genes

The cDNAs encoding the zeta class of glutathione S-transferases (GSTs) (GSTZs), which are multifunctional enzymes, were cloned from Arabidopsis thaliana L. and three lines of Brassica napus L. by RT PCR, and named AtGSTZ for A. thaliana ecotype Columbia gll, and BnGSTZ-A, BnGSTZ-B and BnGSTZ-C for B. napus cv. Shan 2A, Shan 213 and Ken C1, respectively. Sequence analysis revealed that the sequences of Shan 2A and Shan 2B were identical, and Ken C1 was different only in 3.8% of the sequence. Comparison of these sequences with published sequences in GeneBank showed that the sequences of the Brassica species were unpublished. The cDNAs were then inserted into two vectors for in vivo expression in Escherichia coli and in vitro expression in a wheat-germ cell-free protein synthesis system. All GSTZs were well expressed both in vivo and in vitro as an enzymatically active form, showing that all of them had both dichloroacetic acid dechlorinating and maleylacetone isomerase activities.