EFFECTS OF OPERATIONAL CONDITIONS ON DRYING CHARACTERISTICS IN CLOSED SUPERHEATED STEAM DRYING

The effects of operational conditions on the drying performance in closed superheated steam drying were examined theoretically and experimentally. The vapor generated from the sample was circulated in the drying chamber. In the theoretical analysis, the replacement of air with vapor in drying chamber and the convective vapor transfer in sample were considered. At the start of drying, the drying chamber was filled with air. As the drying proceeded, the air was replaced with the vapor generated from sample. The calculated results explained the characteristics of experimental data. The pore diameter of sample had little effect on the drying characteristics. During the internal evaporation period, the evaporation occurred in the narrow zone, which moved from the surface to the bottom of sample. The convective vapor transfer in sample had a significant influence on the drying performance. The excess increments in temperature and velocity of drying gas hardly contributed to shortening the drying time.     

Criteria for versatile GaN MOVPE tool:high growth rate GaN by atmospheric pressure growth

Growth rate has a direct impact on the productivity of nitride LED production.Atmospheric pressure growth of GaN with a growth rate as high as 10μm/h and also Al_0.1Ga_0.9N growth of 1μm/h by using 4 inch by 11 production scale MOVPE are described.XRD of（002） and（102） direction was 200 arcsec and 250 arcsec, respectively.Impact of the growth rate on productivity is discussed.     

Bi-Cu film deposition in aqueous solutions

The relatively uniform bismuth-copper film was electrodeposited between −15 and −20 mV in the sulfate electrolyte containing 4 mmol/L bismuth ion and 2 mmol/L copper ion. Only copper was electrodeposited at −5 mV. The dendritic bismuth-copper film was electrodeposited under −20 mV. The cathodic current became constant between −20 and −400 mV. Therefore, bismuth-copper electrodeposition changes from charge transfer controlling to diffusion controlling at −20 mV. On the other hand, the uniform bismuth-copper film was electrodeposited between −5 and −35 mV in the methanesulfonate electrolyte containing 4 mmol/L bismuth ion and 2 mmol/L copper ion. The dendritic bismuth-copper film was electrodeposited under −35 mV. The potential region for good electrodepositon in methanesulfonate electrolyte is wider than that in sulfate electrolyte. Therefore, it is easy to control electrodeposition conditions by using methanesulfonate electrolyte.     

Simplified method for determining cadmium concentrations in rice foliage and soil by using a biosensor kit with immunochromatography

BACKGROUND: The behavior of cadmium in ecosystems needs to be monitored because of the human toxicity of this heavy metal. The need recently arose for a simple and quick on‐site test for trace levels of Cd in food and environmental samples. In response, an immunochromatographic assay kit for detecting Cd was manufactured by Kansai Electric Power Co. of Japan. This kit uses the antigen–antibody complex reaction between the Cd–EDTA complex and an anti‐Cd–EDTA antibody and shows the results in terms of the degree of color developed on a test paper. We previously reported the successful use of this kit to determine Cd concentrations in brown rice. Here, we applied the kit to the determination of Cd concentrations in rice foliage and soil. RESULTS: Cadmium in rice foliage was not extracted successfully by the method used for brown rice. However, it was successfully extracted by 0.1 mol L^?1 HCl solution at a rice foliage:HCl ratio of 1:20, and coexisting metals were removed sufficiently by the column treatment. The Cd concentrations determined by immunochromatographic assay were well correlated with the values obtained by acid decomposition and inductively coupled plasma mass spectrometry. The 0.1 mol L^?1 HCl‐extractable Cd concentration in soil was also determined successfully with the kit. CONCLUSION: Approximate Cd concentrations in rice plants and 0.1 mol L^?1 HCl‐extractable Cd concentrations in soil can be monitored easily and quickly by this method at locations where facilities for acid digestion and precision analysis are not available. Copyright © 2009 Society of Chemical Industry     

Probabilistic enhancement of approximate indexing in metric spaces

Some approximate indexing schemes have been recently proposed in metric spaces which sort the objects in the database according to pseudo-scores. It is known that (1) some of them provide a very good trade-off between response time and accuracy, and (2) probability-based pseudo-scores can provide an optimal trade-off in range queries if the probabilities are correctly estimated. Based on these facts, we propose a probabilistic enhancement scheme which can be applied to any pseudo-score based scheme. Our scheme computes probability-based pseudo-scores using pseudo-scores obtained from a pseudo-score based scheme. In order to estimate the probability-based pseudo-scores, we use the object-specific parameters in logistic regression and learn the parameters using MAP (Maximum a Posteriori) estimation and the empirical Bayes method. We also propose a technique which speeds up learning the parameters using pseudo-scores. We applied our scheme to the two state-of-the-art schemes: the standard pivot-based scheme and the permutation-based scheme, and evaluated them using various kinds of datasets from the Metric Space Library. The results showed that our scheme outperformed the conventional schemes, with regard to both the number of distance computations and the CPU time, in all the datasets.     

A PAM control method for a matrix converter based on a virtual AC/DC/AC conversion method

In this paper, a novel control method for a matrix converter is proposed. The proposed method is a PAM (Pulse Amplitude Modulation) control method based on a virtual AC/DC/AC conversion method. Output voltage amplitude is controlled by controlling a virtual DC link voltage with a virtual rectifier. Output frequency is controlled by a virtual inverter. First, the proposed method is explained. Next, the validity of the proposed method is confirmed through simulation and experiment using a 750‐W prototype matrix converter. Moreover, various characteristics of the proposed method and conventional virtual AC/DC/AC method are compared through experiment. As a result of the experiment, it has been understood that total harmonic distortion of output current and common‐mode voltage can be reduced compared with the case of using a conventional virtual AC/DC/AC conversion method. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 166(4): 88–96, 2009; Published online in Wiley InterScience ( www.interscience. wiley.com ). DOI 10.1002/eej.20601     

TEM/STEM Observation of ZrC Coating Layer for Advanced High-Temperature Gas-Cooled Reactor Fuel, Part II

The Japan Atomic Energy Agency (JAEA) has started to study and develop zirconium carbide (ZrC)-coated fuel particles for advanced high-temperature gas-cooled reactors. The ZrC coating layer has been fabricated at JAEA by chemical vapor deposition using a pyrolytic reaction of zirconium bromide. The microstructures of the ZrC layers, whose nominal deposition temperatures could be measured and controlled during the deposition process, were characterized by means of TEM and STEM. In the present study, three batches were prepared and compared with each other as well as the previous batches. The crystallographic orientation of ZrC with regard to the growth direction in the ZrC layers deposited at a constant temperature of 1630 K was different from that deposited at varying temperatures in the 1493–1823 K range. A thin layer of turbostratic carbon was observed at the boundary between pyrolytic carbon and ZrC in particles deposited at the highest temperature among those used in this study (the nominal temperature was 1769 K); no such structure was found in a batch deposited at a lower temperature (the nominal temperature was 1632 K). Therefore, precise control of temperature is shown to be critical to the formation of good ZrC coatings.     

Analysis of water in oil-impregnated kraft paper and its effect onconductivity

Oil impregnated paper or polymer film is the main insulating system for many kinds of power apparatus. The oil impregnated materials, especially oil impregnated kraft paper, include a significant amount of water, and this water disturbs the insulating performance of the devices. The amount of water in the materials usually is represented by the difference in weight between the normal material and the same material after drying. However it is difficult to measure the absolute value of the water content and to determine the state in which the water exists in the materials. In this study, we examined the IR spectra of water in oil impregnated kraft paper, because the IR spectrum of the water indicates not only the amount of water but also its state. It was found that most of the water behaves as liquid water, and some as hydrogen bonded water, interacting with the paper fiber. The dc conductivity of the kraft paper depends only on the amount and state of the water associated with it whether or not the paper is impregnated with the oil     

State of water in hydrocarbon liquids and its effect onconductivity [transformer oil]

The humidity or the dissolved water in insulating oils influences conduction and breakdown phenomena. The corrections between the amount of dissolved water and the electrical properties have been investigated. However, the effect of water has been based only on the total amount of water because in the past there was no way to observe the state of water in oil in an electrical field. With the availability of Fourier transform infrared (FTIR) spectroscopy to characterize water clusters, the effect of water in transformer oil can be reassessed based not only on the amount of water, but also on the state of water. In this paper, IR spectra of water in several liquid hydrocarbons and conduction current were measured at the same time. The selection of the liquid hydrocarbons was made on the basis of the degree of polarizability of the liquids. Because the water molecules combine with the polar structures by hydrogen bonding, the state of water depends on the polarizability of the oil. As a result, there is a difference in conduction phenomena depending on whether water is free or combined with the polar structure of the liquid