Inhibitory effect of lead on the proliferation of cultured vascular endothelial cells

We investigated the effect of lead nitrate (0.5, 1.0, 2.0 or 5.0 microM) on the proliferation of cultured bovine aortic endothelial cells. After exposure to lead, the number of cells and the incorporation of [3H]thymidine into the acid-insoluble fraction of the cells were reduced in parallel in a concentration-dependent manner. Histologically, lead treatment resulted in a decrease in the cell number accompanied by a change in the cell shape from polygonal to spindle; however, no degenerative change was observed except in 5.0 microM lead-treated cells. Furthermore, stimulation of [3H]thymidine incorporation by either basic or acidic fibroblast growth factor was significantly reduced by lead. However, the leakage of lactate dehydrogenase into the medium from the cells, a marker of nonspecific cell damage, was not changed by lead. From these results, it was revealed that lead inhibits the proliferation of cultured vascular endothelial cells without nonspecific cell damage. Although lead does not destroy the monolayer of endothelial cells, the metal may exhibit its noxious effect in the repair process of the vascular endothelium.     

Development of 170 GHz/500 kW gyrotron

A development of 170GHz/500kW level gyrotron was carried out as R&D work of ITER. The oscillation mode is TE_31,8. In a short pulse experiment, the maximum power of 750kW was achieved at 85kV/40A. The efficiency was 22%. In the depressed collector operation, 500kW/36%/50ms was obtained. The maximum efficiency of 40% was obtained at P_RF=470kW whereas the power decrease by the electron trapping was observed. Pulse extension was done up to 10s at P_RF=170kW with the depressed collector operation. The power was limited by the temperature increase of the output window.     

Experimental study on a quasi-optical mode converter for transforming the whispering-gallery mode into a circularly polarized hollow radiation beam

An experiment was carried out for transforming the 120 GHz-TE_12.2 whispering-gallery mode (WGM) into a circularly polarized hollow radiation beam. A hollow beam was formed by reflecting the WGM, which was radiated from a 16 mm radius circular waveguide cut, with an annular mirror having suitable local normal vectors. The experimentally observed field intensity profiles of the reflected wave were in good agreement with calculated results.     

Oxidation of Fe (II) in sulfuric acid solutions with dissolved molecular oxygen

The oxidation of Fe(II) with dissolved molecular oxygen was studied in sulfuric acid solutions containing 0.2 mol . dm^-3 FeSO₄ at temperatures ranging from 343 to 363 K. In solutions of sulfuric acid above 0.4 mol . dm^-3, the oxidation of Fe (II) was found to proceed through two parallel paths. In one path the reaction rate was proportional to both [Fe²⁺]² and po₂, exhibiting an activation energy of 51.6 . kJ mol^-1. In another path the reaction rate was proportional to [Fe²⁺]², [SO_4-], and po₂ with an activation energy of 144.6 kJ . mol^-1. A reaction mechanism in which the SO_4- ions play an important role was proposed for the oxidation of Fe(II). In dilute solutions of sulfuric acid below 0.4 mol . dm^-3, the rate of the oxidation reaction was found to be proportional to both [Fe(II)]² and Po₂, and was also affected by [H⁺] and [SO_2- ⁴]. The decrease in [H⁺] resulted in the increase of reaction rate. The discussion was further extended to the effect of Fe (III) on the oxidation reaction of Fe (II).     

Deposition rate dependence of coercivity in vaccum evaporated CoCr films

Deposition rate dependence of perpendicular coercivity Hcl in Cocr evaporated films at the deposition rate ranging from 0.4nm/s to 400nm/s is studied. Hcl increases with decreasing deposition rate as well as with increasing substrate temperature. A High Hcl over 500 Oe, which has ever been obtained only at a substrate temperature over 250°C when deposition rate is high(400nm/s), is obtained at a substrate temperature of 150°C under deposition rate of 2nm/s. "Shoulder" in the hysteresis loop disappears as Hcl exceeds 400 Oe. Therefore to decrease the deposition rate and to increase the substrate temperature have the same effect on Hcl. Saturation magnetization of the films with the same Cr concentration increases with decreasing deposition rate, and it is suggested that the degree of Cr segregation increases with decreasing deposition rate. Hcl is independent of the background pressure when the relative pressure, the quotient of (background pressure/deposition rate), is between 2×10^-8and 5×10^-6torr/(nm/s). From the results above, it is clarified that the difference of deposition rate between vacuum evaporation and sputtering is one of the major reasons for the difference of Hcl between the two.     

A load dispatch method using fractional programming and semidefinite programming

This paper describes a load dispatch method which minimizes power cost—[fuel cost]/[electric output]—for a power system with thermal plants and energy storage facilities. The proposed method employs fractional programming to convert a minimization problem with fractional objective function to a series of quadratic minimization problems, and semidefinite programming to solve converted problems. The method provides the optimum time‐dependent power output/input and storage level of energy storage facilities as well as time‐dependent power output of thermal plants. The method has been applied to a power system with five thermal plants, two energy storage facilities of various performances, and five load demands. The optimum load scheme of four time mesh points is obtained for the thermal plants and energy storage facilities. The fractional programming successfully converges the optimal scheme through a few iterations. The semidefinite programming deals with a variable matrix of 164 dimensions, and 185 inequality constraints. © 2001 Scripta Technica, Electr Eng Jpn, 138(2): 49–58, 2002     

Change of characteristics of desulfurization and denitrification by combustion flue gas composition and electrode configuration under pulsed corona discharge

Laboratory-scale and parametric experiments of SO₂ and NO_x removal from the simulated combustion gas by pulsed corona discharge have been performed by changing the combustion gas composition and temperature, the electrode configuration of plasma reactor, and the polarity of high-voltage electrode. The following results are obtained: 1) the higher the concentration of H₂O and O₂, the higher the efficiency of desulfurization and denitrification at the same specific input; 2) the pulsed corona discharge with a voltage pulsewidth as short as 200 ns of negative polarity shows the possibility to attain almost 90 percent deSO_x and deNO_x efficiency at the specific discharge input of 20 J/g, which is almost the same as the specific input in the electron-beam process; 3) the deNO_x characteristics show a little temperature dependence in the range of 70 to 130°C, but the deSO_x efficiency increases rapidly in the temperature region below 100°C suggesting the thermochemical dependence of deSO_x reaction; 4) when desulfurization and denitrification proceed, the white dendritic powder deposits on the plasma reactor whose composition is identified to be 49 mol% (NH₄)₂SO₄ and 47 mol% of 2NH₄NO₃ · (NH₄)₂SO₄, and the ratio of SO₂, NO and NH₃ of the deposit is almost equal to that of supplied gas.     

Synthesis and optical properties of the [2.2]paracyclophane-containing π-conjugated polymer with a diacetylene unit

Summary Novel through-spaceπ-conjugated polymer based on poly(p-henyleneethynylene)/poly(p-phenylenebutadiynylene) hybrids containing a [2.2]paracyclophane unit in the main chain was synthesized by copper-catalyzed alkyne coupling reaction. The structure of the polymer was supported by ¹H NMR and IR spectra. The obtained polymer was soluble in common organic solvents such as THF, CH₂C1₂, CHC1₃ and toluene. The number-average of molecular weight of the polymer was estimated to be 63000 by GPC. The polymer emitted a bluish green light in solution and in the solid state. Received:24 September 2002/Revised version: 19 November 2002/Accepted: 19 November 2002 Correspondence to Yoshiki Chujo