Preparation and mechanical properties of polystyrene–clay hybrids

Polystyrene–clay hybrids (PSCHs) were prepared by melt blending a styrene vinyloxazoline copolymer with organophilic clay. In the PSCHs, the silicate layers of the clay were delaminated and dispersed homogeneously to the nanometer level. The moduli of the PSCHs were higher than that of the PS copolymer. For example, the tensile modulus of the PSCH with 5 wt % clay was 1.4 times higher compared to that of the PS copolymer. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 3359–3364, 1999     

Preparation and electrocatalytic activity of palladium-platinum core-shell nanoalloys protected by a perfluorinated sulfonic acid ionomer

Palladium-platinum nanoalloys with a core-shell and nano-network structure were successfully synthesized by a hydrogen sacrificial protective method in an aqueous solution directly using a perfluorinated sulfonic acid (PFSA) ionomer as a protecting agent. The structure, local composition and electrocatalytic activity for the oxygen reduction reaction of the Pd/Pt/PFSA nanoalloys were investigated by transmission electron microscopy (TEM), aberration corrected scanning transmission electron microscopy (Cs-STEM), energy-dispersive X-ray spectrometry (EDS) and voltammetry. The core-shell structure was completed without contaminating reducing agents, organic solvents, useless protecting agents and a mediator. The Pd/Pt/PFSA core-shell nanoalloys realized a high electrochemical surface area and better electrocatalytic mass-activity for the oxygen reduction reaction than the Pt/PFSA nanoparticles.     

Isolation and application of a styrene-degrading strain of Pseudomonas putida to biofiltration

A bacterial strain ST201 capable of degrading styrene was isolated from soil and identified as Pseudomonas putida. This strain had high tolerance to styrene and could degrade it completely in 48 h at concentrations up to 600 mg/l. P. putida ST201 was also demonstrated to degrade a mixture of benzene, toluene, ethylbenzene and p-xylene. A packed tower biofilter inoculated with P. putida ST201 was constructed which removed styrene vapor with a styrene elimination capacity of 90 g/m3.h.     

The Gold-Inert gas systems

Journal of Phase Equilibria -     

XPS analysis of CdS/CuInSe2 heterojunctions

CdS/CuInSe₂ (CIS) heterojunctions were investigated by XPS analysis. An In-excess layer which may form an ordered vacancy compound (OVC) was present at the as-deposited CIS surface and it remained after chemical bath deposition of a CdS layer. The In-excess layer was removed by preferential etching with NH₃ aqueous solution. This result implies that the surface of the as-deposited CIS film was converted from the OVC with n-type conductivity into the CIS with p-type by NH₃ treatment. The conduction band offsets at the CdS/p-CIS and CdS/n-OVC were determined to be 1.0 and 0.3 eV, respectively. The CIS solar cells fabricated with n-OVC surface layer exhibited higher cell efficiencies than those fabricated with p-CIS surface layer.     

Spectrum sharing method for secondary systems using frequency priority table to reduce inter-secondary interference

Because of the rapid development of cognitive radio technologies, research on sharing frequency resources allocated to primary users with secondary users has attracted much attention. If a frequency band is unused by the primary users, multiple secondary users are expected to share the spectrum in a future wireless communication network. To efficiently share the spectrum among secondary systems, we propose a novel channel allocation method that uses a frequency priority table generated based on the location of the secondary system. By using this method, the interference with other systems is autonomously reduced by selecting channels. Moreover, a power control method is also proposed for protecting the secondary systems that are allocated to the channels with higher priority.     

A capacitive fingerprint sensor chip using low-temperature poly-Si TFTs on a glass substrate and a novel and unique sensing method

We have developed a capacitive fingerprint sensor chip using low-temperature poly-Si thin film transistors (TFTs). We have obtained good fingerprint images which have sufficient contrast for fingerprint certification. The sensor chip comprises sensor circuits, drive circuits, and a signal processing circuit. The new sensor cell employs only one transistor and one sensor plate within one cell. There is no leakage current to other cells by using a new and unique sensing method. The output of this sensor chip is an analog wave and the designed maximum output level is almost equal to the TFT's threshold voltage, which is 2-3 V for low-temperature poly-Si TFTs. We used a glass substrate and only two metal layers to lower the cost. The size of the trial chip is 30 mm/spl times/20 mm/spl times/1.2 mm and the sensor area is 19.2 mm/spl times/15 mm. The size of the prototype cell is now 60 /spl mu/m/spl times/60 /spl mu/m at 423 dpi, but it will be easy to increase the resolution up to more than 500 dpi. The drive frequency is now 500 kHz and the power consumption is 1.2 mW with a 5-V supply voltage. This new fingerprint sensor is most suitable for mobile use because the sensor chip is low cost and in a thin package with low power consumption.     

High-power and highly reliable 780 nm band AlGaAs laser diodes withrectangular ridge structure

A record light output power of 240 mW has been achieved for the 780 nm band AlGaAs laser diodes by using a rectangular ridge structure. The laser diodes have been operated for >1000 h at 60°C under 150 mW pulsed operation     

The effect of chemical reaction on the mixing flow between aqueous solutions of acetic acid and ammonia

The basic characteristics of the reacting mixing flow of two streams were investigated. The reaction between aqueous solutions of ammonia and acetic acid, which produces ammonium acetate, was investigated in terms of the effect on the fluid–fluid interface of the mixing flow relative to fluids that did not react. The reaction between these solutions was negligibly exothermic, and there were minimal differences in density. The velocity field in the reacting mixing flow was quantitatively measured using high-speed time-resolved particle image velocimetry (PIV) and the behavior of the mixing flow was qualitatively investigated using laser-induced fluorescence (LIF). The jet width, the velocity field, the kinetic energy and the turbulent intensities are qualitatively estimated and discussed. It was found that the chemical reaction resulted in the suppression of the mixing flow.     

A novel spherical carbon

We developed a novel spherical carbon material. The spherical carbon is composed of a high density of carbon nanotubes or nanofilaments, and includes an oxidized diamond particle as a core. Syntheses of this carbon in high volume with high selectivity may be possible. It is expected that this carbon will be useful as a catalyst material for fuel cells, electric double-layer capacitors, etc.