Generalized stress intensity factors in the interaction between two fibers in matrix

To evaluate the mechanical strength of fiber reinforced composites it is necessary to consider singular stresses at the end of fibers because they cause crack initiation, propagation, and final failure. The singular stress is expressed by generalized stress intensity factors defined at the corner of fibers. As a 2D model an interaction between rectangular inclusions under longitudinal tension is treated in this paper. The body force method is used to formulate the problem as a system of singular integral equations with Cauchy-type or logarithmic-type singularities, where the unknown functions are the densities of body forces distributed in infinite plates having the same elastic constants as those of the matrix and inclusions. In order to analyze the problem accurately, the unknown functions are expressed as piecewize smooth functions using two types of fundamental densities and power series, where the fundamental densities are chosen to represent the symmetric stress singularity of 1/r ^1– ₁ and the skew-symmetric stress singularity of 1/r ^1– ₂. Then, generalized stress intensity factors at the end of inclusions are systematically calculated for various locations, spacings and elastic modulus of two rectangular inclusions in a plate subjected to longitudinal tension.     

Surface magnetism of type II superconductors

The magnetization of a type II superconductor in the mixed state is a sum of two contributions, one from an array of flux lines and the other from shielding currents flowing along the surface. The former can be evaluated with the help of results of neutron diffraction experiments, using an extrapolation procedure. The observed magnetization curve thus enables us to estimate the surface contribution. This process is applied to the data on niobium obtained by Schelten, Ullmaier, and Lippmann. It is found that at low temperatures (T/T _c =0.161 and 0.457), the surface contribution may not be reduced atH _c2 as much as theories predict. At higher temperatures (T/T _c =0.717 and 0.891), it is likely to be paramagnetic in a region rather close toH _c1 . Attractive interaction between flux lines is suggested to be a mechanism of this anomaly. However, more experimental and theoretical work is needed to establish these findings to help us understand the surface magnetism of type II superconductors.     

Evaluation of TEM samples of an Mg-Al alloy prepared using FIB milling at the operating voltages of 10 kV and 40 kV

Transmission electron microscopy (TEM) samples of an Mg-Al alloy has been prepared using a Ga-focused ion beam (FIB) milling at two different operating voltages of 10 kV and 40 kV to investigate the influence of the FIB energy on the sample quality. The fine structures of the samples have been studied using a high resolution TEM, and the concentration of the implanted Ga was analysed using an energy dispersive X-ray (EDX) analysis. The result of the TEM observation revealed that point defects were introduced to the sample finally milled at 40 kV but not at 10 kV. However, crystal lattice images and electron diffraction patterns were clearly observed on both the samples. The typical influence of the FIB energy was indicated in the elemental analysis. The relative Ga concentration in the thin sample finally milled at 10 kV was 1.0-2.0 at% that is less than half of 4.0-6.0 at% of the Ga concentration in the sample finally milled at 40 kV. A comparison between the experimental results of the Ga concentration measurement with simulation was also discussed.     

Generation of single-walled carbon nanotubes from alcohol and generation mechanism by molecular dynamics simulations

Recent advances in high-purity and high-yield catalytic chemical vapor deposition (CVD) generation of single-walled carbon nanotubes (SWNTs) from alcohol are comprehensively presented and discussed on the basis of results obtained from both experimental and numerical investigations. We have uniquely adopted alcohol as a carbon feedstock, and this has resulted in high-quality, low-temperature synthesis of SWNTs. This technique can produce SWNTs even at a very low temperature of 550 degrees C, which is about 300 degrees C lower than the conventional CVD methods in which methane or acetylene is typically used. We demonstrate the excellence of the proposed alcohol catalytic CVD method for high-yield production of SWNTs when Fe-Co on USY-zeolite powder was used as a catalyst. At optimum CVD conditions, a SWNT yield of more than 40 wt % was achieved over the weight of the catalytic powder within the reaction time of 120 min. In addition to the advantages for mass production, this method is also suitable for the direct synthesis of high-quality SWNTs on Si and quartz substrates when combined with the newly developed liquid-based "dip-coat" technique to mount catalytic metals on the surface of substrates. This method allows easy and costless loading of catalytic metals without the need for any support or underlayer materials that were usually required in previous studies for the generation of a sufficient quantity of SWNTs on an Si surface. Finally, the result of molecular dynamics simulation for the SWNT growth process is presented to obtain a fundamental insight into the initial growth mechanism on the catalytic particles.     

Development of service-oriented products based on the inverse manufacturing concept

To achieve sustainability, resource consumption and waste generation must be drastically decreased. For societal acceptance, preservation of both quality of life and corporate profits are essential. One promising approach is to shift the source of value from the amount of product sold to the quality of services the product provides. This paper describes the need for redesigning recycling systems from a manufacturing perspective and then discusses the possibility of this "servicification" of products, describing our experience with prototype development. We discuss development of product prototypes and their business, using consumer facsimile machines as an example of "service-oriented products". Traditional thought presumes that only products comprising new materials and components are valuable. Consideration of a service-oriented product can serve as a stimulus to revise this mode of thought and to control delivery and quality of disposed products. This paper also provides a life cycle simulation of the developed service-oriented business. Simulation results indicate that service-oriented business can potentially reduce environmental impact while extending business opportunities from the viewpoint of whole product life cycles.     

Production and performance of the inFOCmicroS 20-40-keV graded multilayer mirror

The International Focusing Optics Collaboration for microCrab Sensitivity (InFOCmicroS) balloonborne hard x-ray telescope incorporates graded Pt/C multilayers replicated onto segmented Al foils to obtain the significant effective area at energies previously inaccessible to x-ray optics. Reflectivity measurements of individual foils demonstrate our capability to produce a mass quantity of multilayered foils with a rms roughness of 0.5 nm. The effective area of the completed mirror is 78 and 22 cm2 at 20 and 40 keV, respectively. The measured half-power diameter is 2.0 +/- 0.6 are min (90% confidence). The successful completion of this mirror demonstrates its applicability to future x-ray telescopes such as Constellation-X.     

Urban growth and change analysis using remote sensing and spatial metrics from 1975 to 2003 for Hanoi,Vietnam

Since the beginning of the ‘Doi Moi’ policy in 1986, Hanoi has witnessed significant changes in its urban areas. Landsat and Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) scenes were used to identify built-up areas in Hanoi, and spatial metrics were used to characterize urban change patterns from 1975 to 2003. Firstly, a spatial metric called the ‘percentage of like adjacency’ was used to discern urban growth patterns, which were classified into three sub-patterns: expansion growth, infill growth and outlying growth. Secondly, the driving force underlying the urbanization of the city for the 1975–1984, 1984–1992, 1992–2001, 2001–2003 periods was investigated using a spatial metric analysis programme (FRAGSTATS). The expansion of urban areas along major transportation routes in the latter 1980s was identified as the main form of urbanization in Hanoi. This paper shows the potential application of spatial metrics as secondary sources of information for supporting remotely sensed data and their use to characterize urban growth patterns.     

Super‐reflective color LCD with PDLC technology

Abstract— A novel reflective color LCD without polarizers has been developed using a PDLC film and a retro‐reflector. Bright color images including moving images are achievable with ambient light. This novel LCD will enable the new application area of electronic paper.     

Effect of molasses on the production and activity of dye-decolorizing peroxidase from Geotrichum candidum Dec1

The production of dye-decolorizing peroxidase (DyP) was investigated by cultivating Geotrichum candidum Dec1 using molasses as a carbon source. Molasses at concentrations greater than 10 g·l⁻¹ was found to increase the decolorization activity of the culture broth toward dye, reactive blue 5 mainly because the amount of enzyme produced was enhanced. However, complete inhibition of DyP activity by molasses was observed at the concentration of 20 g·l⁻¹, indicating that the inhibitory effect of molasses on the culture broth activity to decolorize the dye was involved. When the culture broth was diluted 25 times, the dye-decolorizing activity was 7 times as much as that of non-diluted culture broth. The molasses fractions separated by gel chromatography (300–400 ml and 400–500 ml fractions) completely inhibited the purified DyP. On the basis of these results, we propose a scheme to control both positive and negative effects of molasses on the dye decolorization process.     

An efficient contention resolution algorithm for input queuing atm cross-connect switches

This paper describes an efficient contention resolution algorithm and its distributed implementation for large capacity input queuing cross-connect switches, which will establish virtual paths in future broadband ATM networks. The algorithm dynamically allocates sending time to cells held in input queues when no contention is indicated in the designated output ports. An expression for the mean delay and the cell loss probability for random traffic are derived through an approximate analysis. Input cells are served on a first-come, first-served basis as conventional contention resolution algorithms whose throughput saturates at 58 per cent because of head of line blocking in input queues. The proposed algorithm achieves a maximum throughput of 76 per cent.