方柱体镦粗的两个新力学模型

在对平板间镦粗圆柱体的研究［１，２，３］基础上，进一步对普通平板间的方柱体镦粗，进行了工程力学的分析，提出了二个新力学模型，并进行了实验验证。这为形成新的拔长理论［４，６］奠定了力学基础。     

A study on typology of areas densely populated with foreigners in Seoul,South Korea

This study identifies the types of areas in Seoul where foreigners are concentrated by reflecting the characteristics of their region of origin and residence in Seoul. Lack of cultural understanding and uniform policies for various immigrant communities are causing some social issues. Hence, this study aims to prepare the basic data from which the government can predict changes in ethnic areas and prepare policies suitable for each derived type. The 14 most populous immigrant communities in Seoul were investigated, and cluster analysis and ANOVA test were performed. This examination resulted in four immigrant community types. Each type has specific characteristics, which have influenced the creation and change of the built environment. Types 1 and 4 are collectivistic. These types gradually tend to change urban environments to emulate the environment in their region of origin. In addition, they make little effort to improve their degraded environments, and such areas become increasingly backward. In contrast, types 2 and 3 are individualistic and prefer to assimilate into a migrant region. The formation and change of the urban environment for each type can be predicted on the basis of these characteristics. From this information, the government can prepare an appropriate urban architecture policy for each type.     

空调系统节能优化运行与改造案例研究(3):空调机组

空调机组的控制调节不仅对风机能耗有重要影响,而且会影响水系统的健康运行.通过对一个案例的具体分析,归纳了影响空调机组运行的三个关键因素:调节过程的时间步长是否与控制对象的惯性相一致;是否具备调节风量的手段;控制是否考虑各空调机组之间的影响.对空调机组的运行优化应从这三方面着手.介绍了具体的改造案例和节能收益.     

Thermal evaluation of vertical greenery systems for building walls

This research involves the study of 8 different vertical greenery systems (VGSs) installed in HortPark to evaluate the thermal impacts on the performance of buildings and their immediate environment based on the surface and ambient temperatures. VGSs 3 and 4 have the best cooling efficiency according to the maximum temperature reduction of the wall and substrate surfaces. These results point to the potential thermal benefits of vertical greenery systems in reducing the surface temperature of buildings facades in the tropical climate, leading to a reduction in the cooling load and energy cost. In terms of the lowest diurnal range of average wall surface temperature fluctuation, VGSs 4 and 1 show the highest capacities. No vertical greenery system performs well in term of the diurnal range of average substrate temperature fluctuation. By limiting the diurnal fluctuation of wall surface temperatures, the lifespan of building facades is prolonged, slowing down wear and tear as well as savings in maintenance cost and the replacement of façade parts. The effects of vertical greenery systems on ambient temperature are found to depend on specific vertical greenery systems. VGS 2 has hardly any effect on the ambient temperature while the effects of VGS 4 are felt as far as 0.60 m away. Given the preponderance of wall facades in the built environment, the use of vertical greenery systems to cool the ambient temperature in building canyons is promising. Furthermore, air intakes of air-conditioning at a cooler ambient temperature translate into saving in energy cooling load.     

Thermal sensation of Hong Kong people with increased air speed,temperature and humidity in air-conditioned environment

In the warm and humid climate zone, air-conditioning (AC) is usually provided at working places to enhance human thermal comfort and work productivity. From the building sustainability point of view, to achieve acceptable thermal sensation with the minimum use of energy can be desirable. A new AC design tactic is then to increase the air movement so that the summer temperature setting can be raised. A laboratory-based thermal comfort survey was conducted in Hong Kong with around 300 educated Chinese subjects. Their thermal sensation votes were gathered for a range of controlled thermal environment. The result analysis shows that, like in many other Asian cities, the thermal sensation of the Hong Kong people is sensitive to air temperature and speed, but not much to humidity. With bodily air speed at 0.1–0.2 m/s, clothing level 0.55 clo and metabolic rate 1 met, the neutral temperature was found around 25.4 °C for sedentary working environment. Then recommendations are given to the appropriate controlled AC environment in Hong Kong with higher airflow speeds.     

Composite beam composed of steel and precast concrete (Modularized Hybrid System,MHS). Part I: experimental investigation

An experimental investigation of composite beams composed of wide flange steel and precast concrete is presented. The bottom flange of the steel section is encased in precast concrete. Utilizing the merits of both steel and concrete material, the size of the steel beams can be reduced without sacrificing performance. The bottom flange of the steel beam is reinforced with concrete at a manufacturing plant, eliminating the use of temporary pour forms. The composite beams were tested to investigate how the size of the wide flange steel and how the top and bottom reinforcements influence the behaviour of the beams. Flexural load carrying capacity, load displacement relationships and failure modes were examined. The test specimens were T‐shaped composite beams with slabs, each measuring 10‐m long. The flexural moment strength of all of the composite beams—at both the yield limit state and the maximum load limit state—was measured and compared with the analytical flexural capacity. The stiffness degradation, ductility and dissipating energy capabilities of the composite beams were investigated based on the hysteresis curves. The composite beams tested in this study successfully reduced both the floor height of the building and the size of the steel beams needed to meet code requirements. Copyright © 2008 John Wiley & Sons, Ltd.     

An energy impact assessment of ventilation for indoor airborne bacteria exposure risk in air-conditioned offices

Treatment of fresh air in ventilation systems for air-conditioned offices consumes a significant amount of energy and affects the indoor air quality (IAQ). In this study, energy impact on the ventilation systems was examined against certain IAQ objectives for indoor airborne bacteria exposure risk in air-conditioned offices of Hong Kong. The relationship between thermal energy consumptions and indoor airborne bacteria exposure levels based on regional surveys was investigated. The thermal energy consumptions of ventilation systems operating for carbon dioxide (CO₂) exposure concentrations between 800 and 1200 ppmv for typical office buildings and the corresponding failure probability against some target bacteria exposure levels were evaluated. The results showed that, for a reference indoor environment at a CO₂ exposure concentration of 1000 ppmv, the predicted average thermal energy saving of ventilation system for a unit increment of the expected risk of unsatisfactory IAQ of 1% was 55 MJ m⁻² yr⁻¹ and for a unit decrement of 1%, the predicted additional thermal energy consumption was 58 MJ m⁻² yr⁻¹ respectively. This study would be a useful source of reference in evaluation of the energy performance of ventilation strategies in air-conditioned offices at a quantified exposure risk of airborne bacteria.     

Source apportionment of heavy metals and ionic contaminants in rainwater tanks in a subtropical urban area in Australia

Due to prolonged droughts in recent years, the use of rainwater tanks in urban areas has increased in Australia. In order to apportion sources of contribution to heavy metal and ionic contaminants in rainwater tanks in Brisbane, a subtropical urban area in Australia, monthly tank water samples (24 sites, 31 tanks) and concurrent bulk deposition samples (18 sites) were collected during mainly April 2007-March 2008. The samples were analysed for acid-soluble metals, soluble anions, total inorganic carbon and total organic carbon, and characteristics such as total solid and pH. The Positive Matrix Factorisation model, EPA PMF 3.0, was used to apportion sources of contribution to the contaminants. Four source factors were identified for the bulk deposition samples, including ‘crustal matter/sea salt’, ‘car exhausts/road side dust’, ‘industrial dust’ and ‘aged sea salt/secondary aerosols’. For the tank water samples, apart from these atmospheric deposition related factors which contributed in total to 65% of the total contaminant concentration on average, another six rainwater collection system related factors were identified, including ‘plumbing’, ‘building material’, ‘galvanizing’, ‘roofing’, ‘steel’ and ‘lead flashing/paint’ (contributing in total to 35% of the total concentration on average). The Australian Drinking Water Guideline for lead was exceeded in 15% of the tank water samples. The collection system related factors, in particular the ‘lead flashing/paint’ factor, contributed to 79% of the lead in the tank water samples on average. The concentration of lead in tank water was found to vary with various environmental and collection system factors, in particular the presence of lead flashing on the roof. The results also indicated the important role of sludge dynamics inside the tank on the quality of tank water.     

关于取消屋面工程“防水层设计使用年限”的重要意义

2012年10月1日起颁布实施的《屋面工程技术规范》(GB50345-2012),在3.0.5条中已取消了征求意见稿和送审稿中有关"防水层设计使用年限"的规定,笔者作为该条文修改的建议者和规范审查专家,有必要对相关情况进行解读,并对今后如何执行这一条文提出一些看法和建议。     

A Method for Received Waveform Reconstruction Based on Bender Element Test Using Frequency-swept Signal

An experimental technique for reconstructing the received wave of bender element tests based on linear system theory is shown in this paper. In order to identify the frequency response of testing apparatus, bender element tests using frequency-swept signals are performed. Received waves for one-period sine pulse transmitting with various frequencies are calculated and compared with observed waves in several kinds of soil samples and testing apparatuses. The linearity of the testing system is also confirmed by coherence function. It is shown that calculated data are less affected by random noise and show good agreement with observed data in regards to not only waveform itself but also resulting shear wave velocity. It is mentioned that this technique can provide simulations for arbitrary transmitted waveform with high signal/noise ratio after laboratory tests are performed. It is also mentioned that this technique is advantageous when sufficient amplitude of received wave cannot be ensured or shear wave velocity must be verified, for example, due to uncertainty of arrival time by near-field effect.