BiNem® manufacturing process for mass production

Abstract— As the need for high‐resolution ultra‐low‐power bistable displays grows, it is important to rapidly implement the mass‐production manufacturing of BiNem® LCDs. The cost‐effective approach for BiNem® manufacturing is based on using STN manufacturing process technologies since BiNem® and STN displays have a similar internal structure. The key differences between BiNem® and STN displays from a manufacturing point of view will be discussed. We show that industrial STN manufacturing equipment can be used to produce BiNem® LCDs at competitive costs. Reflective e‐book display modules with VGA resolution are produced in the pilot‐production series.     

Efficient mining of intertransaction association rules

Most of the previous studies on mining association rules are on mining intratransaction associations, i.e., the associations among items within the same transaction. We extend the scope to include multidimensional, intertransaction associations. In a database of stock price information, an example of such an association is "if (company) A's stock goes up on day one, B's stock will go down on day two but go up on day four:" whether we treat company or day as the unit of transaction, the items belong to different transactions. Moreover, such an intertransaction association can be extended to associate multiple properties in the same rule, so that multidimensional intertransaction associations can also be defined and discovered. Mining intertransaction associations pose more challenges on efficient processing than mining intratransaction associations because the number of potential association rules is extremely large. We introduce the notion of intertransaction association rule and develop an efficient algorithm, FITI (first intra then inter), for mining intertransaction associations, which adopts two major ideas: 1) an intertransaction frequent itemset contains only the frequent itemsets of its corresponding intratransaction counterpart; and 2) a special data structure is built among intratransaction frequent itemsets for efficient mining of intertransaction frequent itemsets.     

Advanced SPICE modeling of large power IGBT modules

An enhanced insulated gate bipolar transistor (IGBT) model based on the Kraus model with new derivations based on an extra parameter accounting for p-i-n injection was developed to allow simulation of both trench and DMOS IGBT structures. Temperature dependence was also implemented in the model. The model was validated against steady-state and transient measurements done on an 800-A 1.7-kV Dynex IGBT module at 25/spl deg/C and 125/spl deg/C. The Spice model has also shown excellent agreement with mixed mode MEDICI simulations. The Spice model also takes into account for the first time the parasitic thyristor effect allowing the dc and dynamic temperature-dependent latchup modeling of power modules as well as their temperature-dependent safe operating area.     

Heteroepitaxial growth of indium phosphide on silicon by MOCVD using adduct source

Abstract

The heteroepitaxial growth of InP on Si by low pressure metalor‐ganic chemical vapor deposition is reported. Trimethylindium‐trimethylphosphine adduct was used as In source in this study. From X‐ray and SEM examinations, good crystallinity InP epilayers with mirror‐like surfaces can be grown directly on (100) and (111) p‐type Si substrates. Carrier concentration profile shows that the carrier distribution in the InP epilayer is very uniform. The efficient photo‐luminescence compared with that of InP homoepitaxy shows the good quality of InP/Si epilayers.     

Stress singularity analysis in the restorations of premolar class ii cavities

Abstract

This paper presents the singular stress analysis near the apex of a structure formed during dental restoration of a premolar class II cavity. Based on the elasticity theory, the stresses may go to infinity at the junctions of different materials (e.g. dentine, enamel, restoration materials). Tensions will cause material separation and then material fracture. In order to reduce the failure probability, the degree of stress concentration has to be reduced. The stress singularity order and the stress intensity factor are two parameters, which are often used in fracture analysis. The objective of this paper is to find conditions such that non‐singular stress fields are possible. Three critical positions in the restoration structure are discussed.

They are the tips of interface between (1) enamel and restoration; (2) dentine and restoration; and (3) enamel, dentine and restoration. In the last two cases, the restoration may be bonded or debonded to enamel or dentine. After employing Kolosov‐Muskhelishvili complex functions together with the eigenfunction expansion method, the singularity orders are computed theoretically. Weak stress singularity conditions can be sought by properly selecting cutting angles or restoration materials.     

Layered Nanoprobe for Long‐Lasting Fluorescent Cell Label

A long‐lasting particle‐based fluorescent label is designed for extended cell imaging studies. This onion‐like nanoprobe is constructed through layer‐by‐layer fabrication technology. The nanoprobes are assembled with multiple layers of optically quenched polyelectrolytes, the fluorescence signal of which can be released later by intracellular proteolysis. Upon incubation with cells, the assembled nanoprobes are taken up efficiently. The tight packing and layered assembly of the quenched polyelectrolytes slow subsequent intracellular degradation, and then result in a prolonged intracellular fluorescence signal for up to 3 weeks with no noticeable toxicity.     

Enhancing the Cellular Delivery of Nanoparticles Using Lipo‐Oligoarginine Peptides

Nanoparticles have great potential as nanotherapeutics, delivery vectors, and molecular imaging agents due to their flexible properties. Although intracellular and nuclear delivery of nanoparticles is desirable for therapeutic applications, it remains a challenge. Cell penetrating peptides (CPPs) are a powerful tool for the intracellular delivery of various cargoes. Here it is reported that functionalization of nanoparticles with a myristoylated oligoarginine CPP promotes cellular uptake without increased toxicity. It is evident that the myristoylated CPP is much more effective in transporting nanoparticles than the unmodified CPPs.     

Grain Boundary Responses to Heterogeneous Deformation in Tantalum Polycrystals

The evolution of heterogeneous deformation in a tantalum polycrystal was examined during a three-point bending experiment using electron backscatter pattern mapping. Slip bands formed at strains as low as 1%, and they became more intense with strain. Heterogeneous deformation was evident as intragranular orientation gradients as large as 30° were observed after a strain of about 8%. Nonmonotonic changes in the local average misorientation distribution were observed, implying that dislocation substructure developed in a complex manner. Slip bands were analyzed using plane traces computed from local orientation information. With the assumption of uniaxial stress, Schmid factors for favorable slip systems were identified for each grain and compared with observations, showing evidence for macroscopic activity on both {110} and {112} slip systems. Reconstructed boundary data were used to estimate the geometric potential for slip transfer at grain boundaries. The correlations indicated that when active slip systems were favorably oriented for slip transfer across the boundary, it was often observed in the form of continuous slip bands aligned across the boundary. In boundaries where geometrical alignment and Schmid factors were not favorable for slip transfer, there was a higher likelihood to form ledges (topographic discontinuities) along the grain boundaries. Dislocation pileups at grain boundaries were also correlated with a low potential for slip transfer.     

Hybrid film of chemically modified graphene and vapor-phase-polymerized PEDOT for electronic nose applications

A hybrid of graphene and conducting polymer holds great potential as the active materials for high performance chemical sensor application. In this work, a thin hybrid film of reduced graphene oxide (RG-O) and poly(3,4-ethylenedioxythiophene) (PEDOT) was fabricated by means of vapor phase polymerization and explored as active material for chemical sensors. The chemical sensors based on hybrid film of RG-O and PEDOT are capable of detecting electrical signals caused by the absorption of trace levels of different analyte vapors with high sensitivity, selectivity and fast response.