MODELING LIQUID MASS TRANSFER IN HIGEE SEPARATION PROCESS

Correspondence concerning this paper should be addressed to Professor Richard S.H. Mah. Hsien-Hsin Tung is now affiliated with Department of Chemical Engineering, California Institute of Technology

Penetration theory is used to describe the liquid mass transfer in Higee separation process. Within a possible range of effective areas, it is shown that the predicted mass transfer coefficients are in reasonable agreement with the estimated mass transfer coefficients. The estimated coefficients were calculated from the experimental data and the possible effective areas. Hence it is concluded the penetration theory is generally applicable to describe liquid mass transfer in Higee separation process. The comparison also suggests that liquid mixing at the junctions of packing materials may be more complete in Higee process than in traditional process.     

Crowding stress and violent injuries among behaviorally inhibited rhesus macaques.

Environmental stressors and stable individual differences in human behavior have both been implicated etiologically in injuries. Because stress-related injuries are difficult to study experimentally in humans, the authors examined injury incidence in a troop of 21 male and 15 female free-ranging rhesus macaques (Macaca mulatta) before, during, and after a 6-month group confinement. Individual differences in behavioral inhibition to novelty were assessed, using multiple, quantified observations of behavior by 3 independent raters during 3 previous years. Incidence and severity of medically attended injuries were ascertained from veterinary records over a 2-year study period. A 5-fold increase in the incidence of injuries was documented during confinement stress, and an interaction was found between the stressor and behavioral inhibition in the prediction of injury incidence. Highly inhibited animals had significantly higher injury rates during confinement, compared with their uninhibited peers, but equal or lower rates in the low stress periods that preceded and followed confinement. Inhibited individuals appeared to have been specifically targeted for violence during the group stressor but were protected under normative, more predictable conditions. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Reliability of A Tree Network

This paper presents a mathematical model for computing the reliability of a system with redundant components in a tree configuration. This model is quite general and can be applied to any system representable by the appropriate tree. A typical example is cited. A computer program that computes reliability of a system with a tree configuration up to n stages is also presented in the Appendix.     

Optimal discrete-time control system with cost for observation

The problem of how to select the total number and the spacings of the observations optimally when a constant cost is incurred for each observation taken is discussed. Approximate expressions for the criterion function with a fixed number of observations are obtained and are used to determine the optimal total number of observations. For a class of multidimensional systems with a dominant eigenvalue, the problem is shown to reduce to that for scalar systems. Detailed discussion is then carded out for scalar systems including some sensitivity study.     

Advanced SPICE modeling of large power IGBT modules

An enhanced insulated gate bipolar transistor (IGBT) model based on the Kraus model with new derivations based on an extra parameter accounting for p-i-n injection was developed to allow simulation of both trench and DMOS IGBT structures. Temperature dependence was also implemented in the model. The model was validated against steady-state and transient measurements done on an 800-A 1.7-kV Dynex IGBT module at 25/spl deg/C and 125/spl deg/C. The Spice model has also shown excellent agreement with mixed mode MEDICI simulations. The Spice model also takes into account for the first time the parasitic thyristor effect allowing the dc and dynamic temperature-dependent latchup modeling of power modules as well as their temperature-dependent safe operating area.     

A simple control scheme for a single stage flyback LED driver

This study proposes a simple control scheme for using single‐stage flyback (SSF) converters in lighting source applications for LEDs. Among the advantages of the average current mode is an I/O current ripple that is only one‐half of the critical conduction mode (CRM). This condition helps extend the output capacitor lifetime while lowering the input EMI capacitance input EMI capacitance. The SSF converter proposed in this study operates in continuous conduction mode (CCM). In addition, two sample‐and‐hold (S/H) circuits are placed at the output voltage loop and feed‐forward path, respectively. Since these S/H circuits access the average output current and average feed‐forward voltage, the LED driver is unaffected by the 120‐Hz ripple noise, the total harmonic distortion (THD) is reduced, and the transient response of the output current is improved. Finally, the operation principles and design considerations of the studied LED driver are analyzed and discussed. A laboratory prototype is also designed and tested to verify the feasibility. Copyright © 2014 John Wiley & Sons, Ltd.     

四种活度系数模型在汽-液平衡和精馏计算中的应用和比较

作者将最近十余年来发展的四种活度系数模型（Wilson、NRTL、McCann和UNIFAC）与维里方程及三对角矩阵法相结合,成功地应用于各类非理想溶液精馏过程的严格计算。所编的NIDISTL精馏计算程序曾先后对33个精馏系统进行过百余次考核运算。 为对这些活度系数模型作一平行的比较,本文选取了18组二元汽-液平衡实验数据,用非线性最小二乘法分别确定Wilson、NRTL和McCann方程中各对二元参数值。所得参数值被应用于预测18组二元系和8组由此导出的多元系泡点汽-液平衡数据,并与UNIFAC官能团模型的预测结果及实验数据作比较。 通过四个精馏计算的示例,可以说明采用下同活度系数模型时的收敛特性和计算结果是一致的。本文对各模型所算得的温度、流量和组成分布作了比较,并就某些情况下可能出现较大偏离的原因进行了讨论。     

Dielectric-breakdown-induced epitaxy: a universal breakdown defect in ultrathin gate dielectrics

The breakdown phenomena in SiO/sub x/N/sub y/ (EOT=20 /spl Aring/) gate dielectric under a two- stage constant voltage stress in inversion mode are physically analyzed with the aid of transmission electron microscopy. The results show that dielectric-breakdown-induced epitaxy (DBIE) remains as one of the major failure defects responsible for gate dielectric breakdown evolution even for a stress voltage as low as 2.5 V. Based on the results, the same failure mechanism i.e., presence of DBIE would be responsible for the degradation in ultrathin gate dielectrics for gate voltage below 2.5 V. It is believed that DBIE will be present in MOSFETs failed at nominal operating voltage.     

Data hiding in AMBTC images using quantization level modification and perturbation technique

Multimedia Tools and Applications - A novel data hiding method for Absolute Moment Block Truncation Coding (AMBTC) compressed image based on quantization level modification is proposed. Blocks of...