反应离化团束（RICB）法生长CN硬质薄膜

用反应离化团束（ＲＩＣＢ）法，以低分子量聚乙烯为蒸发材料，氨气为反应气体，在ＮａＣｌ（１００）和Ｓｉ（１００）衬底上淀积Ｃ－Ｎ薄膜，透射电子衍射（ＴＥＭ）分析表明薄膜中含有β－Ｃ３Ｎ４晶粒，Ｘ射线光电子谱（ＸＰＳ）和红外吸收谱（ＩＲ）表明存在Ｃ，Ｎ原子的化学键合。     

以CGA卡为基础的智能显示系统

本文介绍了以微处理器与ＩＢＭ－ＰＣ上的彩色／图形适配器相结合构成的一种智能显示系统。本系统主要解决数控系统中主ＣＰＵ与６８４５ＣＲＴＣ争夺显示缓存的矛盾。保证了６８４５ＣＲＴＣ对显示缓存操作的时间要求；并且保证了数控系统中主ＣＰＵ对显示缓存操作的随意性。     

薄Si膜对基底表面粗糙度的影响

利用ＺＹＧＯ光学干涉测量仪，散射积分测量法观测了光学元件表面均方根粗糙度．详细分析了薄Ｓｉ膜对基底均方根粗糙度的影响，由此认为薄膜并不总是复制基底表面的粗糙度，结果出现了薄膜降低表面粗糙度的现象．提出了一定厚度范围的薄Ｓｉ膜的表面粗糙度存在着一个稳定值的新设想．     

高性能各向异性Sm2Fe17Nx磁粉的制备

本文研究了高性能各向异性Ｓｍ２Ｆｅ１７Ｎｘ磁粉的制备工艺路线与工艺参数。优化了制备与工艺参数。已制备出磁性能达到：Ｂｒ＝１．３９Ｔ，Ｈｃｉ＝８５０ＫＡ／ｍ和（ＢＨ）ｍ＝２３６ＫＪ／ｍ＾３的各向异性Ｓｍ２Ｆｅ１７Ｎ２．８８磁粉，该磁粉的各向异性场ＨＡ达到２０Ｔ。     

Packed hyper-ellipsoid classifiers

Pattern classification is frequently performed using the k-nn algorithm or a neural network. The choice of parameters for the former is often difficult and the amount of data which has to be stored in the classifier can be high. Neural network classifiers can overcome some of these problems but learning is often unreliable and slow. An alternative which combines some of the best features of the k-nn and neural network classifier is described by the authors. The classifier is called a packed hyper-ellipsoid classifier     

薄膜干涉型光学全通滤波器的设计与分析

设计并分析了用于多信道色谱补偿的薄膜Gires-Tournois干涉仪（GTI）型光学全通滤波（OAPF），讨论了反射镜的膜层结构对器件 的群延迟谱和反射谱的影响，。以及大角度入射引起的偏分离现象和幅度畸变现象，给出了单级和多级串拉OAPF的初步设计结果。     

苯并口恶嗪-环氧化合物-胺类催化剂体系开环聚合反应的研究

采用TLC，GPC，1H－NMR及IR等分析方法，对苯并恶嗪－环氧化合物－胺类催化剂体系的聚合反应进行了研究，表征了产物结构，并探讨了聚合反应机理，结果表明，苯并恶唪－环氧化合物体系在胺类催化剂如苄胺，咪唑的作用下，能发生开环聚合反应，生成低分子量的聚合物。     

SPAC系统中水热CO2通量光合作用的综合模型（Ⅱ）：模型验证

本文利用禹城综合试验站土壤－植物－大气连续体系综合观测场冬小麦田实测资料，对“SPAC系统中水热、CO2通量与光合作用的综合模型（Ⅰ）模型建立”一文所建立的模型土壤水分动态、蒸发蒸腾和冠层CO2通量等功能进行了验证，利用波文比观测水汽通量结果、土壤水分剖面监测结果分别与对模拟计算腾发量和土壤水分剖面的验证结果表明，模拟计算的腾发量和土壤水分剖面是比较准确的；将模拟的光合作用过程中的CO2通量与实测值对比表明，模拟值与实测值的变化趋势是一致的，但是数据上存在一定的差异，模拟光合作用过程和强度符合一般规律，总体说明，所建立的系统模型在上述功能的模拟上是可行的。     

Ternary alloying study of MoSi2

Ternary alloying of MoSi₂ with adding a series of transition elements was investigated by X-ray diffraction (XRD), scanning electron microscopy, transmission electron microscopy (TEM), and energy dispersive spectroscopy (EDS). Iron, Co, Ni, Cr, V, Ti, and Nb were chosen as alloying elements according to the AB₂ structure map or the atomic size factor. The studied MoSi₂ base alloys were prepared by the arc melting process from high-purity metals. The EDS analysis showed that Fe, Co, and Ni have no solid solubility in as-cast MoSi₂, while Cr, V, Ti, and Nb exhibit limited solid solubilities, which were determined to be 1.4±0.7, 1.4±0.4, 0.4±0.1, and 0.8±0.1. Micro-structural characterization indicated that Mo-Si-M_VIII (M_VIII=Fe, Co, Ni) and Mo-Si-Cr alloys have a two-phase as-cast microstructure, i.e., MoSi₂ matrix and the second-phase FeSi₂, CoSi, NiSi₂, and CrSi₂, respectively. In as-cast Mo-Si-V, Mo-Si-Ti, and Mo-Si-Nb alloys, besides MoSi₂ and C40 phases, the third phases were observed, which have been identified to be (Mo, V)₅Si₃, TiSi₂, and (Mo, Nb)₅Si₃.     

Permeation of Zidovudine and Probenecid from Oily Bases Containing Alcohols Through Rat Skin

Permeation of zidovudine (3'-azido-3'-deoxythymidine, AZT) and probenecid from oily bases containing an alcohol through rat skin was examined. Isopropyl myristate (IPM), as an oily vehicle, showed a penetration enhancing effect for AZT and probenecid. Ethanol, n-propanol, and n-butanol were used as additives in IPM and were examined for their own permeation and the enhancing effect on the permeation of AZT and probenecid. The skin permeation of AZT and probenecid from IPM was enhanced by addition of the alcohol in IPM. The degree of the enhancement was decreased with increasing lipophilicity of the alcohol used. me permeation rate of the drug from those systems was shown to be governed by penetration-enhancing effects of the oily base and alcohol, and the penetration of the alcohol itself through the skin.