Radiation Effect on Mixed Convection over an Isothermal Wedge in Porous Media: The Entire Regime

A straightforward heat exchanger thermal model is presented and verified experimentally. It may be used to predict the performance of a coil that has condensation occurring on the gas side. Experimentally determined heat and mass transfer coefficients are employed in the model Sample data are presented for a wide range of surface wetting conditions. Partially wet heat exchangers are analyzed by employing an area weighting scheme to the dry and wet portions of the coil with moderate success. It is shown that employing a heat / mass transfer analogy in predicting the performance of a condensing heal exchanger may lead to a considerably undersized coil design.     

Plasmon enhanced upconversion luminescence of NaYF(4):Yb,Er@SiO(2)@Ag core-shell nanocomposites for cell imaging

NaYF(4):Yb,Er@SiO(2)@Ag core-shell nanocomposites were prepared to investigate metal-enhanced upconversion luminescence. Two sizes (15 and 30 nm) of Ag nanoparticles were used. The emission intensity of the upconversion nanocrystals was found to be strongly modulated by the presence of Ag nanoparticles (NPs) on the outer shell layer of the nanocomposites. The extent of modulation depended on the separation distance between Ag NPs and upconversion nanocrystals. The optimum upconversion luminescence enhancement was observed at a separation distance of 10 nm for Ag NPs with two different sizes (15 and 30 nm). A maximum upconversion luminescence enhancement of 14.4-fold was observed when 15 nm Ag nanoparticles were used and 10.8-fold was observed when 30 nm Ag NPs were used. The separation distance dependent emission intensity is ascribed to the competition between energy transfer and enhanced radiative decay rates. The biocompatibility of the nanocomposites was significantly improved by surface modification with DNA. The biological imaging capabilities of these nanocomposites were demonstrated using B16F0 cells.     

Characterization of protein immobilization on nanoporous gold using atomic force microscopy and scanning electron microscopy

Nanoporous gold (NPG), made by dealloying low carat gold alloys, is a relatively new nanomaterial finding application in catalysis, sensing, and as a support for biomolecules. NPG has attracted considerable interest due to its open bicontinuous structure, high surface-to-volume ratio, tunable porosity, chemical stability and biocompatibility. NPG also has the attractive feature of being able to be modified by self-assembled monolayers. Here we use scanning electron microscopy (SEM) and atomic force microscopy (AFM) to characterize a highly efficient approach for protein immobilization on NPG using N-hydroxysuccinimide (NHS) ester functionalized self-assembled monolayers on NPG with pore sizes in the range of tens of nanometres. Comparison of coupling under static versus flow conditions suggests that BSA (Bovine Serum Albumin) and IgG (Immunoglobulin G) can only be immobilized onto the interior surfaces of free standing NPG monoliths with good coverage under flow conditions. AFM is used to examine protein coverage on both the exterior and interior of protein modified NPG. Access to the interior surface of NPG for AFM imaging is achieved using a special procedure for cleaving NPG. AFM is also used to examine BSA immobilized on rough gold surfaces as a comparative study. In principle, the general approach described should be applicable to many enzymes, proteins and protein complexes since both pore sizes and functional groups present on the NPG surfaces are controllable.     

Determination Of The Phase Current Waveform For A Disc‐Type Axial‐Flux Wheel Motor

An optimal design of the driving current pattern for a disc‐type axial‐flux brushless DC wheel motor of an electric vehicle is proposed in this paper. The electro‐magnetic dynamic model of the motor is established with magnetic circuits, describing the relationship between the output torque and excitation current. The optimal current pattern, in terms of magnitude and phase angle, is then obtained by maximizing the output torque with respect to the rotor shift. Compared with the traditional three‐phase‐on current pattern of fixed 120–degree phase shift, both the average torque and efficiency with the driving current of an optimal advanced switching angle are seen to be improved under various loading conditions. The motor performance with the optimal driving waveform is simulated and verified by experiments.     

Spectral efficiency and cutoff rate of random spreading BICM-based CDMA signals with MMSE multiuser receivers

We analyze the spectral efficiency and cutoff rate of random spreading bit-interleaved coded-modulation based synchronous code-division multiple-access signals with minimum mean-square error multiuser receivers. Both additive white Gaussian noise and frequency nonselective Rayleigh fading channels are considered. The spectral efficiency and cutoff rate are characterized as functions of the system load, modulation schemes, and signal-to-noise ratio.     

GAS ABSORPTION INTO WAVY AND TURBULENT NON-NEWTONIAN FALLING LIQUID FILMS IN A WETTED-WALL COLUMN

Average Him thickness and liquid-side mass transfer coefficient for the absorption of oxygen in wavy and turbulent power-law model falling liquid films are measured. Considerable reduction in (he film thickness with resulting increase in the mass transfer coefficient are obtained as compared to that predicted by the theoretical laminar flow equation assuming no slip at the wall.     

Pervaporation separation of a water/ethanol mixture by a sodium sulfonate polysulfone membrane

A sodium sulfonate polysulfone membrane was prepared for the dehydration of a water/ethanol mixture by pervaporation. The separation performances of water and ethanol were examined by the testing of the ethanol/water mixture under operating conditions. The permselectivity of the sodium sulfonate polysulfone membrane was found to strongly depend on the sodium content in the membrane. The sodium sulfonate ratio showed a significant influence on the hydrophilicity and diffusion behavior of the polysulfone membrane. Moreover, the difference in the diffusion of the permeates played an important role in the sulfonate polysulfone membrane. It was found that a high‐performance pervaporation membrane could be achieved with a sodium sulfonate polysulfone membrane. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3374–3383, 2003     

Permselectivities of 2,2′‐dimethyl‐4,4′‐bis(aminophenoxyl)biphenyl diphenyl methane–based aromatic polyamide membranes for aqueous alcohol mixtures in pervaporation and evapomeation

The separation of aqueous alcohol mixtures was carried out by use of a series of novel aromatic polyamide membranes. The aromatic polyamides were prepared by the direct polycondensation of 2,2′‐dimethyl‐4,4′‐bis(aminophenoxyl)biphenyl (DBAPB) with various aromatic diacids, such as terephthalic acid (TPAc), 5‐tert‐butylisophthalic acid (TBPAc), and 4,4′‐hexafluoroisopropylidenedibenzoic acid (FDAc). The pervaporation and evapomeation performance of these novel aromatic polyamide membranes for dehydrating aqueous alcohol solution were investigated. The solubility of ethanol in the aromatic polyamide membranes is higher than that of water, but the diffusivity of water through the membrane is higher than that of ethanol. The effect of diffusion selectivity on the membrane separation performances plays an important role in the evapomeation process. Compared with pervaporation, evapomeation effectively increases the permselectivity of water. Moreover, the effect of aromatic diacids on the polymer chain packing density, pervaporation, and evapomeation performance were investigated. It was found that the permeation rate could be increased by introduction of a bulky group into the polymer backbone. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2688–2697, 2003     

Oviposition attractants and repellents of mosquitoes

Infusions of various organic materials have been known to modify ovipositional behavior of gravid female mosquitoes. Previously, we found that an infusion of Purina Laboratory Chow elicited negative ovipositional behavior inCulex pipiens quinquefasciatus Say andCulex tarsalis Coquillett. In the present chemical studies, the Purina Laboratory Chow infusion, fermented for 10 days, was distilled to give an active distillate which, upon ether extraction, gave an active ether extract. Fractionation of the ether extract yielded an active acidic fraction and inactive nonacidic fraction. Gas Chromatographie analysis on Porapak R and AT-1200-H₃PO₄ columns of the acidic fraction showed the presence of acetic, propionic, isobutyric, butyric, isovaleric, and caproic acids. In bioassay tests, these lower aliphatic carboxylic acids, individually and in combination, exhibited ovipositional repellency against the two species of mosquitoes at the concentration of 6 × 10^–2%. At this concentration, butyric acid caused 100% mortality in first-instar larvae ofC. p. quinquefasciatus. Gravid female mosquitoes might have acquired, through evolutional adaptation, the ability of avoiding ovipositing in unsuitable sites in which toxic compounds might be detrimental to the survival and development of their offspring.Diptera: Culicidae.