Characterization of EBPVD micro-layer composites and simulation of its internal stress state

Based on the basic operating principal and the technology characteristic of electron beam physical vapor deposition(EBPVD) technique, EBPVD was used to prepare the micro-layer composites. The effect on the substrate preheating temperature was taken into accounts and the finite element analysis package ANSYS was used to simulate the internal stress field and the potential displacement changing tendency. The results show that one of the most important quality factors on the judgment of micro-layer composites is the adhesion between the substrate and the deposition layers as well as among the different deposition layers. Besides the existance of temperature gradient through the thickness of layers, the main reason for the internal stress in micro-layer composites is the mismatch of various properties of the layer and the substrate of different thermal expansions and crystal lattice types. With the increase of substrate preheating temperature, the inter-laminar shear stress also takes on a tendency of increase but the axial residual stress decrease.     

基于进化规划的自适应IIR滤波

针对基于梯度下降算法的自适应IIR滤波器（AIIRF）具有潜在的不稳定性和性能指标函数容易陷入局部极小而导致性能下降等问题，本文将进化规划用于AI－IRF的优化设计，不仅解决了AIIRF系统稳定性问题，而且有效地实现了滤波器性能指标函数的全局寻优和快速收敛，同时允许大动态范围的输入号。计算机仿真结果验证了基于进化规划算法的AIIRF的性能优于基于梯度算法的AIIRF，尤其对高阶、极点靠近单位圆的自适应IIR滤波器。     

The changes of lipid metabolism and hemorrheology in intrahepatic cholestasis during pregnancy

OBJECTIVE: To identify the influence of the increased level of serum cholyglycine (CG) on lipid metabolism and hemorrheology in patients with intrahepatic cholestasis during pregnancy (ICP). METHODS: The concentrations of serum CG, total cholesterol (CH), triglycerides (TG), high density lipoprotein-cholesterol (HDL-C), low density lipoprotein-cholesterol (LDL-C), high shear and low shear of blood specific viscosity (HS and LS), plasma specific viscosity (PV) and hematocrit (HCT) were measured in 68 cases of primiparas with single pregnancy and 30 healthy nonpregnant women respectively. The group of ICP was composed of 35 cases with CG > 6 mumol/L, the group of normal pregnancy, 33 cases with CG < 6 mumol/L. RESULTS: The means of CG and the lipidic parameters in the two pregnant groups were significantly higher than those in the non-pregnancy group (P < 0.02-0.001) except the means of HDL-C between the groups of ICP and non-pregnancy. The levels of LDL-C, LDL-C/HDL-C, LS, PV and HCT in the ICP were significantly higher than those in the normal pregnancy group (P < 0.02-0.001). CONCLUSIONS: There are significant changes of lipid metabolism and hemorrheology in patients with ICP. However, these changes could be corrected after pregnancy termination, when the level of serum CG returned to normal. The results suggest that the pathophysiologic changes of ICP are associated with increased level of serum CG.     

高频数字锁相环的研究

论文阐述了１００ＭＨｚ数字锁相环的设计过程，用１０ＭＨｚ晶体振荡器对１００ＭＨｚ数字压控振荡器进行锁相，使１００ＭＨｚ输出信号指标得到很大改善。论文还分析了各单元电路，关键点时域波形测试，频谱测试。     

机械合金化过程中Fe70B30粉末晶粒尺寸和微观应变的研究

用Ｘ射线和电镜研究了Ｆｅ＿（７０）Ｂ＿（３０）粉末经不同时间高能球磨后晶粒尺寸和微观应力的变化。在机械合金化过程中，粉末的Ｘ射线衍射谱的宽度随球磨时间的增加逐渐加宽，这是晶粒细化和内部微观应力共同作用的结果。Ｘ射线衍射结果表明：随着机械合金化的进行，粉末的晶粒尺寸逐渐减小，球磨初期晶粒尺寸下降较快，经１５ｈ球磨，晶粒尺寸为２５ｎｍ，机械合金化进行到一定时间后晶粒尺寸下降缓慢，８０ｈ球磨后晶粒尺寸可达５ｎｍ。在机械合金化过程中球磨所造成的微观应变不大，球磨初期粉末的内应力随球磨时间增加而增加，当粉末粒子尺寸很小时，随球磨的进行粉末中的微观应变显著下降。     

TiAl基合金表面改性对高温抗氧化性的影响

研究了渗碳处理ＴｉＡｌ基合金试样的高温氧化行为，发现渗碳处理可以在ＴｉＡｌ基合金试样表层形成致密的多层结构的渗碳层，并发生表层Ａｌ、Ｔｉ重新分配。致密的渗碳层具有良好的高温抗氧化性和高温热稳定性，同时，Ｔｉ、Ａｌ重新分配形成的富Ａｌ最外层也能进一步提高合金的抗氧化性。     

实现CDMA最佳多用户检测的神经网络方法

提出并讨论了两种实现码分多址系统中最佳多用户检测的神经网络方法。一种基于离散Ｈｏｐｆｉｅｌｄ神经网络，另一种基于采用反向传播算法的多层感知器神经网络。理论分析和计算机模拟都证实了这两种神经网络方法的可行性，优越性和实用性。前者适用“固定”用户情况；后者既可用于“固定”用户吼适用于移动用户的情况，因而在未来的ＣＤＭＡ个人通信网中有较好的应用前景。     

Mesopore development in PAN-ACF resulting from non-metal additives

The narrow pore-size distribution of activated carbon fibres (ACF) limits their application in the fields concerning larger molecules, such as liquid adsorption and catalyst support. On the addition of carbon particles and organic materials to polyacrylonitrile fibres, and after stabilizing and activating, the mesoporosity in the resultant ACF has been obviously increased. Among these additives, carbon black gives the best effect. With 1 wt% carbon black I in precursor and on activating at 880°C for 30 min, a mesoporosity of 48.2% (total pore volume 0.704 ml g-1, mesopore volume 0.340 ml g-1) has been obtained. The mechanism of mesopore formation is also discussed. This revised version was published online in November 2006 with corrections to the Cover Date.     

注聚采出水分离用动态水力旋流器特性研究

原有的地面工艺和设备已不能满足聚合物驱采出水分离的要求。采用自行研制的动态水力旋流器，在增压与不增压两种工艺流程下，分别进行了流量和转数对分离效率的影响、转数与压力降的关系，以及入口压力与处理量的关系等项试验研究。试验结果表明，与静态水力旋流器相比，动态水力旋流器的分离效率明显提高，一般可提高10％左右；压力损失显著降低，约可减少0．1MPa，足见可在低压下工作，易于实现无泵运行；无泵运行明显比有泵增压运行的分离效率高，但处理量会有所降低。将动态水力旋流器应用于聚合物驱产出水的油－水分离处理是完全可行的。     

����������Ͳ�¶ȷֲ�����

凝析气井井筒温度分布是进行气井节点分析和动态分析必不可少的参数。根据传热学原理推出了凝析气井井筒温度分布计算公式，研究了温度计算基础数据求取方法，分析了产气量、产水量、井深及油管直径对井口温度的影响规律。对某一井深为５４００ｍ的凝析气井进行了计算，该气井气油比为３０００，含２３％的Ｈ２Ｓ和４％的Ｎ２；地层温度为１３４℃。计算结果表明：井口实测温度与计算温度的相对误差为０２％～３８％，符合工程精度。气井温度随井深不呈线性分布；气井井口温度随产量、井深增加而增加，随油管直径减少而减少；该公式同时适用于干气井、湿气井和凝析气井的温度分布计算，计算精度符合工程精度要求。