TEM study of PLZT ceramics

The microscopic structures of PLZT(7.9/70/30 and x/65/35, x = 7 or 8) ceramics were studied by means of transmission electron microscopy. The presence of micro-regions in PLZTs was first verfied.     

基于Intel 87c196kc的某机载设备随动系统数字控制器的实现

介绍了某机载光电设备随动系统控制器的设计与实现。该控制器是基于Intel公司87c196kc的数字控制器，设计中充分利用了87c196kc较强的运算能力及其它片内功能，使得控制器设计简捷、调整灵活、体积小，提高了系统的可靠性。     

明渠湍流床面附近跃移层面颗粒浓度垂线分布

本文以动理学理论的Boltzmann方程为基础，考虑明渠湍流床面附近猝发喷射和清扫运动对跃移层内运动颗粒的不同作用，分析了明渠中泥沙颗粒浓度垂线分布问题，得到了适用于包括跃移层、悬移层在内的统一浓度垂线分布公式。文中着重研究了跃移层内运动颗粒的浓度垂线分布，并将本文结果与实测跃移层内浓度垂线分布及实测跃移层顶部浓度进行了对比，结果表明理论与实验两者符合较好。     

一种改进的同步侦破和识别过失误差的方法

将线性组合技术引入过失误差同步估计法 ,用于确定候选过失误差子集。以一个循环网为例 ,对两种算法的性能进行了比较。对一个蒸汽系统的稳态数据校正仿真结果证明了该方法的有效性     

载人航天高可靠伺服技术

回顾了载人航天高可靠伺服技术的研制道路，介绍了用于载人航天火箭推力矢量控制中的新型三余度伺服机构的技术特点，对载人航天伺服技术的未来发展进行了分析和展望。     

Mode coupling and equilibrium mode distribution conditions in plastic optical fibers

The equilibrium mode distribution (EMD) condition is critical for optical fiber measurements. In this letter, we examine the achievement of EMD condition inside plastic optical fibers (POF's) under different launch conditions. Our pulse broadening measurements of step-index (SI) POF's as a function of fiber length show that the EMD condition can readily be achieved in an SI POF much shorter than in glass optical fibers. The observation of the EMD condition was also independently verified using the far-field pattern technique.     

Extensive thrombophlebitis with reactive thrombocytosis in a high risk Chinese parturient associated with retained placenta increta: a case report

Forty-three patients with spastic quadriplegia (mean age 7.9 years, range 3.3 to 17.2 years) underwent bone mineral density (BMD) measurement of the lumbar spine and were evaluated between 2.6 and 5.5 years (mean 3.8) later to determine whether this measurement had predicted risk of fracture over the subsequent period of observation. Other potential risk factors that were evaluated include body weight z score, serum vitamin D levels, previous fracture, and hip spica casting. The baseline measurements showed that BMD falls further below normal with increasing age and was more than one standard deviation below age-matched normal mean in 38 of the 43 patients. Fracture rate did not differ between those with low and those with very low spinal BMD. Similarly, serum vitamin D levels and body weight z scores were not predictive of fracture. However, fracture rate was over fourfold greater following spica casting and more than threefold greater following an initial fracture. Fracture rates in the study group were similar to those reported for age- and sex-matched normal children, though generally the location of the fractures and mechanisms of injury differed.     

转移法色交换

将图Ｇ的着色由一种变为中一种，通常用Ｋｅｍｐｅ法以交换。但是，对于某些情况，用此法无效。针对这个问题，本文提出了一种转移法色交换，它适用于平面图着色，方法直观，清晰且有效。     

不清根手工双面焊材料及工艺研究

本文分析了中厚板传统手工双面焊存在的诸如打底焊焊缝质量无法保证，需用碳弧气刨清根；工人劳动强度大；生产效率低；焊接质量不稳定等主要问题。为提高打底焊焊道质量，不用清根使背面得到良好的凹成形，研制了适合Ｘ形坡口的梯形体陶瓷衬垫。探讨了焊缝背面成形的主要影响因素及控制方法。     

Heat extraction efficiency of a concentric glass tubular evacuated collector

The results of detailed measurements and calculations of the properties of Sydney University/Nitto Kohki evacuated collector tubes have been used to develop a formula for the instantaneous heat extraction efficiency η of a collector panel incorporating the evacuated tubes. The instantaneous efficiency depends on ambient temperature, mean fluid temperature in the collector, solar flux and the design of the manifold used to extract heat from the glass absorber tubes. Manifold design determines the mean temperature difference between absorber tube surface and mean fluid temperature for given operating conditions, and strongly affects the efficiency η of a collector panel. Neither changes in the number of evacuated tubes per unit area of collector, nor variations in solar flux, significantly alter the efficiency decrement Δ η₀ associated with a particular manifold design. Calculated efficiencies agree well with experimental results for collector panels incorporating manifolds of various designs. The formula for efficiency η allows detailed analysis of the relative importance of various energy loss mechanisms in a collector.