淤浆鼓泡床中固体粒子的悬浮特性

研究了三相鼓泡床中的临界固含率,以空气作气相,水、乙醇-水、丙酮-水、萜松醇-二甲苯作液相,石英砂、煤、雷奈镍作为固相。分析了鼓泡柱的高径比、气体速度、固体粒子的大小和比重、液体的粘度对临界固含率的影响,提出了含有这些参数的无因次数群的关联式,讨论了本文提出的关联式和文献报导的差别。     

Optimization of injection molding design. Part I: Gate location optimization

The placement of a gate in an injection mold is one of the most important variables of the total mold design. The quality of the molded part is greatly affected by the gate location, because it influences the manner in which the plastic flows into the mold cavity. Some defects, such as weldline and overpack, can be effectively controlled only by the gate location. Therefore, the product quality can be greatly improved by determining the optimum gate location. In this paper, we develop a general methodology for gate location optimization. We first quantify quality in terms of flow simulation outputs. We can thus assess detrimental effects such as warpage and dimensional instability as a function of the independent variable, which is in this case the gate location. Next we develop methods to search for the optimum gate location. The search method introduced in this paper is a method that combines a deterministic hill climbing search with a stochastic annealing search method. The method is appropriately called simulated annealing and hill climbing (SANHIL). The criteria used for evaluation during the search process are a function of the flow simulation outputs. We demonstrate the success of the method for a complex industrial mold. The approach is applicable to any complex mold geometry and any plastic.     

秋季太湖叶绿素a浓度荧光反演研究

基于2007年11~12月太湖全湖实测水质参数和光谱数据,首先利用高斯方程对遥感反射率进行过滤分解,找出叶绿素a(chl\|a)吸收峰675 nm以后的荧光反射峰(Fluorescence Peak:FP),再以662 nm处的反射率为基准,采用归一化荧光高度法进行叶绿素a浓度(C chl-a)反演,得到chl-a反演模型。基于高斯分解获取的chl-a的荧光反射峰值R(FP)与662 nm处的反射率R (662)比值［R(FP)/R(662)］与C chl-a之间存在显著的相关性,该模型为秋季太湖水体C chl-a的最佳反演模型。在高悬浮泥沙条件下,该模型能够较好地表示出叶绿素荧光高度与叶绿素浓度之间的关系,为C chl-a反演提供新的方法和依据,并为传感器敏感波段的选取和设置提供参考。     

网站数据相关内容提取功能的设计与研究

本文根据内容提取的相关知识,以及它们在用户浏览信息时的应用,提出了内容匹配的高效算法,重点研究提取信息时如何提高匹配精度。通过这种算法,系统预测用户可能感兴趣的文章,并按感兴趣的程度向用户提供内容导航,得到一个个性化的相关信息显示页面。     

A new result on the delay‐dependent stability of discrete systems with time‐varying delays

This paper proposes an improvement to the delay‐dependent stability of discrete systems with time‐varying delays. The approach is based on the observation that the positive definiteness of a chosen Lyapunov–Krasovskii functional does not necessarily require all the involved symmetric matrices to be positive definite, which has been overlooked in the literature. The derived delay‐dependent stability conditions are in terms of linear matrix inequalities. It is theoretically proved that our results are less conservative than the corresponding ones obtained by requiring the positive definiteness of all the symmetric matrices in a chosen Lyapunov–Krasovskii functional. The importance of the present approach is that a great number of delay‐dependent analysis and synthesis results obtained by the aforementioned requirement in the literature can be improved by the present approach without introducing any new decision variables. Copyright © 2013 John Wiley & Sons, Ltd.     

基于格的非交互式密钥交换协议

当前网络中广泛使用的交互式密钥交换协议,如SSL协议和TLS协议,由于密钥建立过程的通信量较大,不适合物联网中传感器等资源有限的轻型网络设备使用,因此提出一种基于格的非交互式密钥交换协议.文章基于格理论的环上带误差学习困难性问题,使用Freire等人给出的非交互式密钥交换协议形式化定义和安全模型对协议的安全性进行分析,通过攻击者与挑战者之间的博弈证明了协议的安全性.该协议具有抗量子攻击安全性,能够有效地提升物联网的通信安全.     

Effect of ambient wind on pressure wave generated by high-speed train entering a tunnel

Journal of Central South University - Using three-dimensional, unsteady N-S equations and k-ε turbulence model, the effect of ambient wind on the pressure wave generated by a high-speed train...     

Synchronization for linear singularly perturbed complex networks with coupling delays

This paper is concerned with the synchronization problem about linear singularly perturbed complex network system with coupling delay. The sufficient delay-dependent conditions for the synchronization of the network are established by introducing an equivalent network system with the Lyapunov stability theory. These conditions, which are formulated in terms of linear matrix inequalities, can be solved efficiently by the LMI toolbox of MATLAB. A simulation example is provided to show the validity of the proposed the synchronization conditions of the whole network.     

广义相似距核视频关键帧分层提取算法*

针对视频镜头关键帧特征提取矩阵可能尺寸大小不一致导致相似度无法计算的问题,提出一种广义相似距核视频关键帧分层聚类算法。首先,针对行数相同列不同的两个特征矩阵,基于矩阵运算方法提出一种广义相似距核相似度计算方法并给出其改进形式。其次,基于改进相似距核计算方法和层次聚类算法,设计了广义相似距核视频关键帧分层聚类算法。最后,通过在测试视频数据库及人造视频片段库上的仿真实验表明,该算法能够有效的完成视频关键帧的聚类和提取操作。     

催化柴油管式液相加氢脱硫数值模拟

采用计算流体力学(CFD)软件FLUENT,以用户自定义函数(UDF)添加化学反应和反应热,对实验室带有陶瓷膜管分散器的催化柴油管式液相加氢脱硫反应器进行模拟计算,得出反应床层不同部位的硫化物含量分布和温度分布状况。从反应床层的入口到出口,催化柴油的硫化物含量逐渐下降,且下降速度趋缓。在压力6.5 MPa、混氢量0.84%(m)、空速2 h~(-1)、进口温度633 K的条件下,位于床层高度0.15 m处出现最高温度点643.8 K,径向温差最大2.1 K,表明催化柴油管式液相加氢脱硫反应器催化剂装填合适的高径比为4~6。工艺条件的模拟结果表明:随着进口温度上升、混氢量增加、空速减小脱硫率提高,与实验数据吻合程度较好,说明模拟研究过程中采用的模型和控制方程准确性较高。