SED88: a Pascal program for the analysis of sedimentation equilibrium data

Analytical ultracentrifugation is commonly used for the determination of molecular weights (sedimentation equilibrium) and sedimentation coefficients (sedimentation rate) of biological macromolecules in solution. A Turbo Pascal program for the analysis of sedimentation equilibrium centrifugation data produced by absorbance optical systems is described. The user may enter data from a scan of absorbance versus distance from the centre of rotation, via a graphics tablet (or ASCII file). This is subsequently manipulated to yield an apparent weight average molecular weight for the given sample. Plots of ln (absorbance) versus (radius2) may also be produced. The method described uses readily available computational equipment requiring only a graphics tablet in addition to an IBM PC compatible computer. This technique and the software developed have been used to investigate the molecular weight range of two International Humic Substances Society (IHSS) reference samples from the Suwannee River.     

A kinetic investigation into the removal of carbobenzyloxy group from protected amines via hydrogenolysis reaction

Hydrogenolysis of a carbobenzyloxy group (CBz) was studied utilizing molecular hydrogen in the presence of carbon-supported palladium catalyst. It was demonstrated that the kinetics of the reaction are greatly influenced by the presence of the CO₂ by-product. It was found out that the presence of CO₂ determines whether the reaction is first or zero order since it causes deactivation of the catalyst via inhibition. The effect of potassium carbonate (K₂CO₃) and triethylamine (TEA) as additives was investigated. A considerable solvent effect was also observed that may be explained by the variation of dispersion of the catalyst from one solvent to another.     

Annular slot-coupled dielectric resonator antenna

An annular slot-coupled dielectric resonator antenna is investigated experimentally. As compared with the previous rectangular-slot version, the new configuration offers a much wider bandwidth of 18%. The return loss, radiation patterns, and antenna gain of the configuration have been measured and are discussed     

EFFECT OF THE RATIO Th/U ON TL DATING ACCURACY

ＥＦＦＥＣＴＯＦＴＨＥＲＡＴＩＯＴｈ／ＵＯＮＴＬＤＡＴＩＮＧＡＣＣＵＲＡＣＹ￥Ｐ．Ｌ．Ｌｅｕｎｇ（梁宝鎏）；ＭｉｃｈａｅｌＪ．Ｓｔｏｋｅｓ（ＤｅｐａｒｔｍｅｎｔｏｆＰｈｙｓｉｃｓａｎｄＭａｔｅｒｉａｌｓＳｃｉｅｎｃｅ，ＣｉｔｙＰｏｌｙｔｅｃｈｎｉｃｏ...     

Micromechanical characterisation of fibre/matrix interfaces

Theoretical analyses for the single fibre pull-out and push-out models under monotonic loading are given which are based on a shear-lag analysis in a fracture mechanics approach considering non-constant friction at the debonded interface as a result of fibre Poisson contraction (or expansion). The solutions allow the determination of typical fibre/matrix interfacial properties such as the interfacial fracture toughness, G_ic, the coefficient of friction, μ, and the residual clamping stress, q₀. Under cyclic loading the interfacial properties are expected to degrade as a result of repetitive abrasion, and a power law function is assumed between μ and the number of elapsed cycles, N. However, G_ic is assumed to be unaffected and a fracture mechanics based debond criterion is derived for the relationship between the external applied stress, the debond length and the reduced friction coefficient for both fibre pull-out and fibre push-out. In addition, the relative displacements between the free fibre end and the matrix top are obtained for cyclic fatigue when the fibre is loaded and unloaded. A relationship obtained for the protrusion (or intrusion) length in fibre pull-out (or push-out) experiments allows the severity of the interface frictional degradation to be evaluated and characterised. Similarities and differences in the frictional degradation behaviour between fibre pull-out and push-out are also identified.     

Call control and traffic transport for connection-oriented highspeed wireless personal communications over metropolitan area networks

A distributed circuit-switched approach for supporting the deployment of high speed wireless personal communication services in urban areas through the interconnection of base stations via metropolitan area networks (MANs) is proposed. Broadband MANs minimize traffic congestion by dynamic sharing of link capacity and by serving as distributed switches for partitioning call control functions. While the DQDB protocol readily supports distributed packet-switching over the IEEE 802.6 MAN, isochronous traffic such as voice and video is best supported by circuit-switched connections. The authors present an enhanced bi-state pre-arbitrated (PA) transport mechanism, and associated call control and handoff management techniques, which enable distributed circuit-switching over the MAN. These capabilities are not currently addressed in the 802.6 standards. The bi-state PA transport mechanism facilitates statistical multiplexing of variable rate isochronous traffic sources. The network capacity is constrained by the call setup delay performance, and is analyzed by simulations. Alternative signaling architectures, involving different placements of call control network elements, are evaluated. The effects of erasure nodes, and close bus versus open bus architectures, are considered. The overlap inter-MAN call setup procedure is proposed to reduce delays. Different call handoff procedures are formulated according to the type of handoff and the resulting change in call connectivity. Most handoffs are intra-MAN, requiring simple procedures with short delays     

Preparation and characterization of transparent ZnO/epoxy nanocomposites with high-UV shielding efficiency

Transparent ZnO/epoxy nanocomposites with high-UV shielding efficiency were reported in this paper. First, zinc oxide (ZnO) precursor was synthesized via the homogeneous precipitation method and ZnO nanoparticles were then made by calcination of the precursor at different temperature. The structural properties of the as-prepared ZnO nanoparticles were studied in detail using thermogravimetry (TGA), differential thermal analysis (DTA), X-ray diffractometer (XRD), Fourier transform infrared spectrometer (FT-IR) and transmission electron microscopy (TEM), respectively. Transparent ZnO/epoxy nanocomposites were subsequently prepared from transparent epoxy (EP-400) and as-prepared ZnO nanoparticles via in situ polymerization. Optical properties of ZnO/epoxy nanocomposites, namely visible light transparency and UV light shielding efficiency, were studied using an ultraviolet-visible (UV-vis) spectrophotometer. The optical properties of the as-obtained nanocomposites were shown to depend on ZnO particle size and content. The nanocomposite containing a very low content (0.07% in weight) of ZnO nanoparticles with an average particle size of 26.7 nm after calcination at 350 °C possessed the most optimal optical properties, namely high-visible light transparency and high-UV light shielding efficiency, that are desirable for many important applications.     

The slot-coupled hemispherical dielectric resonator antenna with a parasitic patch: applications to the circularly polarized antenna and wide-band antenna

The aperture-coupled hemispherical dielectric resonator antenna (DRA) with a parasitic patch is studied rigorously. Using the Green's function approach, integral equations for the unknown patch and slot currents are formulated and solved using the method of moments. The theory is utilized to design a circularly polarized (CP) DRA and a wide-band linearly polarized (LP) DRA. In the former, the CP frequency and axial ratio (AR) can easily be controlled by the patch location and patch size, respectively, with the impedance matched by varying the slot length and microstrip stub length. It is important that the AR will not be affected when the input impedance is tuned, and the CP design is therefore greatly facilitated. For the wide-band LP antenna, a maximum bandwidth of 22% can be obtained, which is much wider than the previous bandwidth of 7.5% with no parasitic patches. Finally, the frequency-tuning characteristics of the proposed antenna are discussed. Since the parasitic patch can be applied to any DRAs, the method will find applications in practical DRA designs.     

Sensitivity of LR 115 SSNTD in a diffusion chamber

Solid-state nuclear track detectors (SSNTDs), such as LR 115, have been commonly used in diffusion chambers for long-term measurements of radon gas concentrations. For the LR 115 SSNTD, it has been found that the active layer removed during chemical etching is significantly affected by the presence and amount of stirring, and thus cannot be controlled easily. However, the sensitivity of the LR 115 detector inside a diffusion chamber to the radon and/or thoron gas concentration is dependent on the actual removed active layer thickness. This relationship is dependant on the geometry of the diffusion chamber and the deposition fraction of ²¹⁸Po in the diffusion chamber, as well as the V function for the LR 115 detector (V is the ratio between the track etch velocity V_t to the bulk etch velocity V_b). This paper presents the experimentally determined relationships between the sensitivity of the LR 115 detector inside a Karlsruhe diffusion chamber and the removed active layer thickness, for both radon and thoron. A V function was adjusted to simulate the relationships. In particular, for the case of ²²²Rn, we have found f ∼ 0.5, where f is the fraction of ²¹⁸Po which decays inside the diffusion chamber before deposition onto available inner surfaces of the chamber. In conclusion, we have found that the sensitivities critically depend on the actual removed active layer thickness, so this should be monitored and used in determining the sensitivities.