硫酸盐还原菌对海底土中锌腐蚀的影响

利用微生物分析、交流阻抗测试技术、扫描电镜及表面能谱等方法，在室内模拟条件下研究了海底土中硫酸盐还原菌对锌腐蚀的影响，以及在以接菌及灭菌的海底土构成的宏电池腐蚀中锌的腐蚀行为。180d的试验结果表明：海底土中硫酸盐还原菌增强锌的腐蚀，锌在接菌泥中的平均腐蚀速率及点蚀深度均大于在灭菌泥中的平均腐蚀速率及点饰深度，平均腐蚀速率相差7．0倍，点蚀速率相差15．0倍以上。在接菌和灭菌海底土构成宏电池时，接菌海底土中锌作为阳极，腐蚀速率比自然腐蚀状态下有所增大，加速率为12．7％，而在灭菌海底土中锌作为阴极，腐蚀速率比自然腐蚀状态下有所减小。     

真空电弧涂镀TiN膜中宏观颗粒的电镜分析

用扫描电镜（ＳＥＭ）分析了真空电弧沉积ＴｉＮ膜中宏观颗粒（ＭＰ）的形态，并对观察结果给出了理论解释。电镜分析表明，ＴｉＮ膜中ＭＰ的形态与其粒径有关，粒径大的呈椭球形，粒径小的呈圆球形；ＭＰ与膜层之间有微小孔隙。理论分析表明，形成ＭＰ的液滴在飞行中温度降低的幅度是决定其形态的主要因素。     

Numerical simulation on forging process of TC4 alloy mounting parts

1Introduction The TC4alloy mounting part is an important part of aeronautic engine.Currently,these mounting parts are mainly manufactured by metal cutting,which is expensive and requires a lot of manufacturing time.Furthermore,in this way the forging flow…     

精密挤压(拔制)圆角方型材等相似成形模具映射建模优化

本文针对亟待实现的挤压 (拔制 )异型材模具精密快速加工设计理论课题 ,借助于近代共形映射理论研究成果 ,求解了异型材挤压 (拔制 )模具相似成形塑性流动的数学模型 ,建立了圆角方型材精密挤压 (拔制 )模具模腔数学模型及其优化函数方程 ,建立了为实现模腔精密快速的CAD/CAM一体化的理论模型     

PbS和PbO反应动力学及其机理SCIEI

本文得出了PbS和PbO交互反应的速率方程:(da)/(dt)=kx_(PbS)~3x_(PbO)^(-2);发现了反应过程中有过渡产物碱式硫酸铅(PbSO_4·2PbO);从电子转移角度,探讨了反应机理。     

含硫酸盐还原菌土壤中阴极保护对Q235钢腐蚀的影响

利用交流阻抗测试技术、扫描电镜及表面能谱、微生物分析等方法，研究了阴极保护对土壤中Q235钢硫酸盐还原菌腐蚀的影响.30天的实验结果表明，在相同的阴极极化电位下，有菌土壤中Q235钢所需要的阴极极化电流密度均大于灭菌土壤，有菌土壤中Q235钢的平均腐蚀速率均大于灭菌土壤.随着阴极极化电位负移的增大，有菌及灭菌土壤中Q235钢试件周围土壤逐渐呈碱性，有菌土壤中Q235钢试件周围土壤中硫酸盐还原菌数量逐渐减少，当阴极极化电位为-1050 mV时，Q235钢试件周围土壤中硫酸盐还原菌仍能够存活.     

等温淬火奥—贝球铁抗磨性能的研究

对用３００℃和３６０℃等温淬火的奥－贝球铁的机械性能和抗磨性能进行了测试，结果表明：等温淬火奥－贝球铁是一种具有良好综合力学性能和抗磨性能的抗磨材料。     

摩擦焊机液压施力系统压力特性对比分析

为分析采用电液比例计算机闭环系统进行摩擦焊接过程控制的必要性及可行性,对比分析了分别由开关阀和比例溢流阀组成的两种摩擦焊机轴向压力施力系统的静动态特性,以及长期生产过程中轴向压力波动规律,重点分析了油温对轴向压力参数的影响.结果表明,比例阀控制系统轴向压力的静、动态特性均优于开关阀系统;在长期焊接生产过程中,比例阀控制系统的轴向压力不受液压系统油温影响,比开关阀系统稳定,控制精度高,重现性好.     

Effect of copper addition on the thermal contraction of indium melt clusters

The structure of In-1%Cu and In-5%Cu (mass fraction) alloy melts were studied at different temperatures above liquidus by using a high-temperature X-ray diffractometer and were compared with that of pure In melt. Experimental results show that with the addition of 1% Cu or 5% Cu, the thermal contraction phenomenon of atom clusters occurs in melts with the temperature increasing like pure In melt. With the addition of 1% Cu, the thermal contraction of atom clusters increases and the contraction is not homogeneous in the whole measurement temperature range. The sudden change and noticeable contraction can be found in the range of 280-390℃. The temperature range of the sudden change is lower than that of pure In melt. With the addition of 5% Cu, the thermal contraction of atom clusters decreases and the contraction is not consistent in the whole measurement temperature range. The anomalous change can be measured at about 600 ℃. At the same superheating temperature, the nearest interatomic distance r1 of     

Solid-state phase equilibria in the Gd–Co–Al ternary system at 1173 K

A portion of the isothermal section (1173 K) of the phase diagram of the Gd–Co–Al ternary system (up to 33.3 at.% Gd) were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersion spectroscopy (EDS) techniques. Fourteen single-phase regions (including solid solution regions of the binary compounds), twenty-five two-phase regions and twelve three-phase regions were found to exist at this isothermal section. In the GdCo₂–GdAl₂ system, the existence of the GdCo_0.74Al_1.26 phase is identified and it has a composition range of 30–45 at.% Al, the maximum solid solubility of Al in GdCo₂ is about 15 at.%, and Co in GdAl₂ is about 16 at.%. Besides, the maximum solid solubility of Al in Co, Gd₂Co₁₇ and GdCo₅ is about 6, 17 and 25 at.%, respectively, the maximum solid solubility of Gd in Co, CoAl is below 2 at.% and the solid solubility range is from 47 to 61 at.% Al in CoAl phase. In this work, no new ternary compounds were observed.