Skin-like Omnidirectional Stretchable Platform with Negative Poisson's Ratio for Wearable Strain–Pressure Simultaneous Sensor

Conventional elastomeric polymers used as substrates for wearable platforms have large positive Poisson's ratios (≈0.5) that cause a deformation mismatch with human skin that is multidirectionally elongated under bending of joints. This causes practical problems in elastomer-based wearable devices, such as delamination and detachment, leading to poorly reliable functionality. To overcome this issue, auxetic-structured mechanical reinforcement with glass fibers is applied to the elastomeric film, resulting in a negative Poisson's ratio (NPR), which is a skin-like stretchable substrate (SLSS). Several parameters for determining the materials and geometrical dimensions of the auxetic-structured reinforcing fillers are considered to maximize the NPR. Based on numerical simulation and digital image correlation analysis, the deformation tendencies and strain distribution of the SLSS are investigated and compared with those of the pristine elastomeric substrate. Owing to the strain-localization characteristics, an independent strain-pressure sensing system is fabricated using SLSS with a Ag-based elastomeric ink and a carbon nanotube-based force-sensitive resistor. Finally, it is demonstrated that the SLSS-based sensor platform can be applied as a wearable device to monitor the physical burden on the wrist in real time.     

A 400-mA current-mode buck converter with a self-trimming current sensing scheme

A current-programmed mode (CPM) controller is designed for improved DC–DC converter control. The key building block of the CPM controller is an accurate current-sensing circuit. This paper proposes a lossless current-sensing technique to measure the inductor current by measuring the current through the power transistor. A self-trimming circuit is used to compensate for any inaccuracies caused by voltage and temperature variations. The measurement results validate the operation of the fabricated chip.     

Synergistic Effect of Excited State Property and Aggregation Characteristic of Organic Semiconductor on Efficient Hole-Transportation in Perovskite Device

Intrinsic characteristics of organic semiconductor-based hole transport materials (HTMs) such as facile synthesizability, energy level tunability, and charge transport capability have been highlighted as crucial factors determining the performances of perovskite photovoltaic (PV) cells. However, their properties in the excited state have not been actively studied, although PVs are operated under solar illumination. Here, the characteristics of organic HTMs in their excited state such as transition dipole moment can be a decisive factor that can improve built-in potential of PVs, consequently enhancing their charge extraction property as well as reducing carrier recombination. Moreover, the aggregation property of organic semiconductors, which has been an essential factor for high-performance organic HTMs to improve their carrier transport property, can induce a synergistic effect with their excited state property for the high-efficiency perovskite PVs. Additionally, it is also confirmed that their optical bandgaps, manipulated to have their absorption in the UV region, are beneficial to block UV light that degrades the quality of perovskite, consequently improving the stability of perovskite PV in p–i–n configuration. As a proof-of-concept, a model system, composed of triarylamine and imidazole-based organic HTMs, is designed, and it is believed that this strategy paves a way toward high-performance and stable perovskite PV devices.     

Optimal rebinning of time-of-flight PET data

Time-of-flight (TOF) positron emission tomography (PET) scanners offer the potential for significantly improved signal-to-noise ratio (SNR) and lesion detectability in clinical PET. However, fully 3D TOF PET image reconstruction is a challenging task due to the huge data size. One solution to this problem is to rebin TOF data into a lower dimensional format. We have recently developed Fourier rebinning methods for mapping TOF data into non-TOF formats that retain substantial SNR advantages relative to sinograms acquired without TOF information. However, mappings for rebinning into non-TOF formats are not unique and optimization of rebinning methods has not been widely investigated. In this paper we address the question of optimal rebinning in order to make full use of TOF information. We focus on FORET-3D, which approximately rebins 3D TOF data into 3D non-TOF sinogram formats without requiring a Fourier transform in the axial direction. We optimize the weighting for FORET-3D to minimize the variance, resulting in H(2)-weighted FORET-3D, which turns out to be the best linear unbiased estimator (BLUE) under reasonable approximations and furthermore the uniformly minimum variance unbiased (UMVU) estimator under Gaussian noise assumptions. This implies that any information loss due to optimal rebinning is as a result only of the approximations used in deriving the rebinning equation and developing the optimal weighting. We demonstrate using simulated and real phantom TOF data that the optimal rebinning method achieves variance reduction and contrast recovery improvement compared to nonoptimized rebinning weightings. In our preliminary study using a simplified simulation setup, the performance of the optimal rebinning method was comparable to that of fully 3D TOF MAP.     

Automatic Contrast Enhancement by Transfer Function Modification

In this study, we propose an automatic contrast enhancement method based on transfer function modification (TFM) by histogram equalization. Previous histogram‐based global contrast enhancement techniques employ histogram modification, whereas we propose a direct TFM technique that considers the mean brightness of an image during contrast enhancement. The mean point shifting method using a transfer function is proposed to preserve the mean brightness of an image. In addition, the linearization of transfer function technique, which has a histogram flattening effect, is designed to reduce visual artifacts. An attenuation factor is automatically determined using the maximum value of the probability density function in an image to control its rate of contrast. A new quantitative measurement method called sparsity of a histogram is proposed to obtain a better objective comparison relative to previous global contrast enhancement methods. According to our experimental results, we demonstrated the performance of our proposed method based on generalized measures and the newly proposed measurement.     

Factors influencing intention to donate via social network site (SNS): From Asian’s perspective

This study examined whether external factors, which are charity project, charity organization, Internet technology features and social network site (SNS) features influence people’s general attitude towards online donation and their intention to donate via SNS. An online survey was conducted based on the framework of factors influencing the intention to donate via SNS that was adapted from the literature review. Data from 258 respondents were used for analysis. Structural equation modelling was used to test the research model and hypotheses. The results indicated that the Internet technology features factor significantly contributes in influencing people’s general attitude towards online donation, and general attitude positively influences people’s intention to donate via SNSs. The full mediation effect of the general attitude towards online donation on the relationship between Internet technology features and intention to donate via SNS was found. However, charity project, charity organization, and SNS features were not significant factors in influencing people’s intention to donate via SNSs. The sample was limited to some Asian countries (preliminary Malaysia and South Korea). Thus, the results cannot be generalized to other countries. The findings suggest that non-profit organizations should focus on how to deal with the Internet issues, especially pertaining to security and privacy. Therefore, a mechanism for gaining donors’ trust to use the Internet, particularly in doing online transaction must be considered.     

Kirigami/Origami‐Based Soft Deployable Reflector for Optical Beam Steering

The beam steering mechanism has been a key element for various applications ranging from sensing and imaging to solar tracking systems. However, conventional beam steering systems are bulky and complex and present significant challenges for scaling up. This work introduces the use of soft deployable reflectors combining a soft deployable structure with simple kirigami/origami reflective films. This structure can be used as a macroscale beam steering mechanism that is both simple and compact. This work first develops a soft deployable structure that is easily scalable by patterning of soft linear actuators. This soft deployable structure is capable of increasing its height several folds by expanding in a continuous and controllable manner, which can be used as a frame to deform the linearly stretchable kirigami/origami structures integrated into the structure. Experiments on the reflective capability of the reflectors are conducted and show a good fit to the modeling results. The proposed principles for deployment and for beam steering can be used to realize novel active beam steering devices, highlighting the use of soft robotic principles to produce scalable morphing structures.     

Analysis of Failure in Miniature X‐ray Tubes with Gated Carbon Nanotube Field Emitters

We correlate the failure in miniature X‐ray tubes with the field emission gate leakage current of gated carbon nanotube emitters. The miniature X‐ray tube, even with a small gate leakage current, exhibits an induced voltage on the gate electrode by the anode bias voltage, resulting in a very unstable operation and finally a failure. The induced gate voltage is apparently caused by charging at the insulating spacer of the miniature X‐ray tube through the gate leakage current of the field emission. The gate leakage current could be a criterion for the successful fabrication of miniature X‐ray tubes.