Nucleation of solidification in liquid droplets

Analytical and numerical methods have been developed to analyze the solidification kinetics of a mass of liquid droplets dispersed in a fluid or solid matrix using classical nucleation theory. The resulting analytical expressions and numerical calculations can be compared directly with calorimetric measurements of the droplet solidification exotherms to obtain information about the nucleation mechanism. With increasing contact angle at the solid-liquid-matrix triple point, the solidification onset, peak, and end temperatures and exothermic peak height all decrease sharply and the droplet solidification exotherms become broader. Decreasing either the droplet radius or the number of potential catalytic nucleation sites produces a similar but smaller effect. Distributions in droplet radius, contact angle, and nucleation sites have no effect on the solidification peak temperature, but the droplet solidification exotherms become broader and more symmetric. The solidification onset temperature is independent of cooling rate in the calorimeter, but the solidification peak and end temperatures decrease and the exothermic peak height increases with increasing cooling rate. Predicted droplet solidification exotherms are in excellent agreement with detailed experimental measurements on 10-nm-radius Cd droplets embedded in a solid Al matrix. Analytical predictions give best-fit values of 43 deg and 430 for the contact angle and the number of potential catalytic nucleation sites per droplet, respectively; numerical predictions give best-fit values of 43 deg and 750 for the contact angle and the number of potential catalytic nucleation sites per droplet, respectively.     

Water‐Stable,Magnetic Silica–Cobalt/Cobalt Oxide–Silica Multishell Submicrometer Spheres

A method to produce monodisperse magnetic composite spheres with diameters from less than 100 nm to more than 1 μm in water solution is reported. The spheres consist of a dielectric silica core and a cobalt/cobalt oxide shell which can be protected from further oxidation with an outer shell of silica or, alternatively, they can be covered with the polymer polyvinylpyrrolidone as a stabilizer. The formation of a uniform magnetic shell proceeds with the adsorption of metallic cobalt seeds, produced by the reduction of cobalt chloride with sodium borohydride, on a self‐assembled layer of polyelectrolytes on the silica core. In the second step, an outer silica shell can be formed by the hydrolysis and condensation of (3‐aminopropyl)trimethoxysilane and tetraethoxysilane. The double‐shell composite spheres show excellent sphericity, monodispersity, and a magnetic hysteresis loop at room temperature.     

关于S盒的几点注记

分析了Ｓ盒的平衡性，相关免疫性，严格雪崩性和非线性度的各种可能定义及它们之间的相互关系，提出了要Ｓ盒采用这些准则的定义。     

液罐汽车转弯制动稳定性的研究

该文研究罐装部分液体汽车在转弯制动工况下，由于液体货物质心位置的变化对行驶稳 定性的影响。文中建立了有关力学模型和数学模型，分析研究了罐体内装载不同量液体对汽车转弯制动时横摆角速度的影响规律。     

激光平网雕刻机设计

研制了用于制作平面网版的激光雕刻机，设计了雕刻机用CO2激光器、光路系统及单片机控制系统，探讨了将图像文件转化为控制命令文件的方法。     

纳米碳管的电子衍射及其螺旋度测量

本文对电弧放电和催化剂热解碳氢气法制备的多层直形纳米碳管的倒空间及其螺旋度，采用电子衍射进行了研究。结果表明：尽管制备方法不同，两类多层管的结构相似，皆由螺旋和非螺旋的单层石墨管组成；对其倒空间的分析以及系列倾转电子衍射实验证明，衍射图中测得的表观螺旋度值随和射条件而改变，只有在垂直入射条件下该值才代表碳管的真实螺旋度；     

采用模数转换技术提高脉冲激光测距的测时精度

针对脉冲激光测距中计数量化误差影响测时精度的问题,本文提出了采用模数转换技术提高测时精度的方法,并进行了可行性与精度分析,理论与实践结果均表明,该方法易于实现,能够容易地将计数量化误差减少若干个数量级。     

激光熔敷合金层组织及腐蚀磨损特性研究

利用ＣＯ＿２连续激光器在４５钢表面进行了激光熔敷镍基合金、镍基Ｃｒ＿２Ｏ＿３合金和镍基ＷＣ合金，以２Ｃｒ１３不锈钢为对比材料，系统地研究了激光熔敷层在不同冲击速度和腐蚀介质浓度下的腐蚀磨损特性，并根据组织分析、显微硬度测试及腐蚀磨损后的表面形貌观察，探讨了激光熔敷层的腐蚀磨损过程。结果表明：激光熔敷层的腐蚀磨损性能均比２Ｃｒ１３不锈钢好。     

烧成及热处理工艺对钛酸锶铅基热敏材料性能及显微结构的影响

研究了烧成及热处理工艺对钛酸锶铅基热敏材料的阻温特性及显微结构的影响。通过扫描电镜（ＳＥＭ）和能量分散仪（ＥＤＡＸ）分析了材料的显微结构及不同形貌晶粒的成份。通过对组成、烧成及热处理工艺的控制，可得到具有Ｖ型ＰＴＣＲ特性的热敏材料。