Enhanced efficiency of organic photovoltaic cells with Sr2SiO4:Eu2+ and SrGa2S4:Eu2+ phosphors

We report the effect of yellow Sr₂SiO₄:Eu²⁺ and green SrGa₂S₄:Eu²⁺ phosphors on the efficiency of organic photovoltaic (OPV) cells. Each phosphor was coated on the back side of indium tin oxide (ITO)/glass substrates by spin coating with poly(methyl methacrylate) (PMMA). The maximum absorption wavelength of the active layer in the OPV cells was ～512 nm. The emission peaks of Sr₂SiO₄:Eu²⁺ and SrGa₂S₄:Eu²⁺ were maximized at 552 nm and 534 nm, respectively. The short circuit current density (J_sc) and power conversion efficiency (PCE) of the OPV cells with Sr₂SiO₄:Eu²⁺ (8.55 mA/cm² and 3.25%) and with SrGa₂S₄:Eu²⁺ (9.29 mA/cm² and 3.3%) were higher than those of the control device without phosphor (7.605 mA/cm² and 3.04%). We concluded that phosphor tuned the wavelength of the incident light to the absorption wavelength of the active layer, thus increasing the J_sc and PCE of the OPV cells.     

Unraveling the Significance of Li+/e−/O2 Phase Boundaries with a 3D-Patterned Cu Electrode for Li–O2 Batteries

The reaction kinetics at a triple-phase boundary (TPB) involving Li⁺, e⁻, and O₂ dominate their electrochemical performances in Li–O₂ batteries. Early studies on catalytic activities at Li⁺/e⁻/O₂ interfaces have enabled great progress in energy efficiency; however, localized TPBs within the cathode hamper innovations in battery performance toward commercialization. Here, the effects of homogenized TPBs on the reaction kinetics in air cathodes with structurally designed pore networks in terms of pore size, interconnectivity, and orderliness are explored. The diffusion fluxes of reactants are visualized by modeling, and the simulated map reveals evenly distributed reaction areas within the periodic open structure. The 3D air cathode provides highly active, homogeneous TPBs over a real electrode scale, thus simultaneously achieving large discharge capacity, unprecedented energy efficiency, and long cyclability via mechanical/electrochemical stress relaxation. Homogeneous TPBs by cathode structural engineering provide a new strategy for improving the reaction kinetics beyond controlling the intrinsic properties of the materials.     

Standing wave oscillators utilizing wave-adaptive tapered transmission lines

In this paper, we introduce a novel standing wave oscillator (SWO) utilizing standing-wave-adaptive tapered transmission lines. This structure enhances Q and lowers phase noise through loss-reducing shaping of the transmission line, such that it is adapted to the position-dependent amplitudes of standing waves. Measurements validate the advantages of the proposed technique. The phase noise of a MOS SWO with the tapered line is 5-10 dB less than that of a uniform-line MOS SWO over a wide range of offset frequencies, centered about 15 GHz. Demonstrating a valuable exploitation of standing wave properties, the novel design concept boosts the potential for the emergence of standing wave oscillators as a useful alternative to the traditional lumped LC oscillator.     

IC/microfluidic hybrid system for magnetic manipulation of biological cells

This paper introduces an integrated circuit (IC)/microfluidic hybrid system for magnetic manipulation of biological cells. The hybrid system consists of an IC and a microfluidic system fabricated on top. Biological cells attached to magnetic beads are suspended inside the microfluidic system that maintains biocompatibility. The IC contains a microcoil array circuit that produces spatially-patterned microscopic magnetic fields. Programmable, rapid reconfiguration of the field pattern made possible by the IC allows an efficient simultaneous manipulation of multiple individual bead-bound cells with precise position control. Two prototypes, SiGe/microfluidic and CMOS/microfluidic hybrid systems, validate the proposed approach.     

AB9: A neural processor for inference acceleration

We present AB9, a neural processor for inference acceleration. AB9 consists of a systolic tensor core (STC) neural network accelerator designed to accelerate artificial intelligence applications by exploiting the data reuse and parallelism characteristics inherent in neural networks while providing fast access to large on‐chip memory. Complementing the hardware is an intuitive and user‐friendly development environment that includes a simulator and an implementation flow that provides a high degree of programmability with a short development time. Along with a 40‐TFLOP STC that includes 32k arithmetic units and over 36 MB of on‐chip SRAM, our baseline implementation of AB9 consists of a 1‐GHz quad‐core setup with other various industry‐standard peripheral intellectual properties. The acceleration performance and power efficiency were evaluated using YOLOv2, and the results show that AB9 has superior performance and power efficiency to that of a general‐purpose graphics processing unit implementation. AB9 has been taped out in the TSMC 28‐nm process with a chip size of 17 × 23 mm². Delivery is expected later this year.     

Direct Transfer Printing with Metal Oxide Layers for Fabricating Flexible Nanowire Devices

A direct printing method for fabricating devices by using metal oxide transfer layers instead of conventional transfer media such as polydimethylsiloxane is presented. Metal oxides are not damaged by organic solvents; therefore, electrodes with gaps less than 2 μm can be defined on a metal oxide transfer layer through photolithography. In order to determine a suitable metal oxide for use as transfer layer, the surface energies of various metal oxides are measured, and Au layers deposited on these oxides are transferred onto polyvinylphenol (PVP). To verify the feasibility of our approach, Au source–drain electrodes on transfer layers and Si nanowires (NWs) addressed by the dielectrophoretic (DEP) alignment process are transferred onto rigid and flexible PVP‐coated substrates. Based on transfer test and DEP process, Al₂O₃ is determined to be the best transfer layer. Finally, Si NWs field effect transistors (FETs) are fabricated on a rigid Si substrate and a flexible polyimide film. As the channel length decreases from 3.442 to 1.767 μm, the mobility of FET on the Si substrate increases from 127.61 ± 37.64 to 181.60 ± 23.73 cm² V^?1 s^?1. Furthermore, the flexible Si NWs FETs fabricated through this process show enhanced electrical properties with an increasing number of bending cycles.     

Odor discrimination using neural decoding of the main olfactory bulb in rats

This paper presents a novel method for inferring the odor based on neural activities observed from rats' main olfactory bulbs. Multichannel extracellular single unit recordings were done by microwire electrodes (tungsten, 50 μm, 32 channels) implanted in the mitral/tufted cell layers of the main olfactory bulb of anesthetized rats to obtain neural responses to various odors. Neural response as a key feature was measured by subtraction of neural firing rate before stimulus from after. For odor inference, we have developed a decoding method based on the maximum likelihood estimation. The results have shown that the average decoding accuracy is about 100.0%, 96.0%, 84.0%, and 100.0% with four rats, respectively.     

Factors controlling ammonia loss from trash covered sugarcane fields fertilized with urea

Ammonia losses following surface applications of urea to trash covered sugar cane fields were investigated in four climatic zones of tropical Queensland. Volatilization of ammonia and evaporation of water were determined by micrometeorological techniques. The results showed that the pattern, rate and extent of ammonia loss were controlled by the availability of water in the trash and its evaporation. Water added by dewfall, rainfall or condensation of evaporated soil moisture dissolved some of the urea and allowed it to be hydrolyzed to ammonia by the urease enzyme in the sugarcane residues; when the water evaporated, ammonia was lost to the atmosphere.In the dry climatic zone, where no rain or dew fell, water addition to the trash by condensation of evaporated soil moisture was not sufficient to dissolve much urea so very little ammonia was lost. In the cool and warm moist zones, small additions of water to the trash from dew, light rain and condensation maintained a slow but steady pattern of ammonia loss over a period of six weeks and resulted in losses of 32% and 39% of the applied nitrogen. At the site in the wet zone, heavy rainfall apparently washed the urea from the trash layer into the soil and limited ammonia loss to 17% of the applied nitrogen.Substitution of ammonium sulfate for urea reduced ammonia loss to less than 1.8% of the applied nitrogen.     

Characteristics of polyvinylpyrrolidone-layered silicate nanocomposites prepared by attrition ball milling

Polyvinylpyrrolidone (PVP)/sodium montmorillonite (MMT) nanocomposites prepared via the solution intercalation method were investigated by UV/vis, SEM, X-ray diffraction, TEM, FT-IR and PLM (polarized light microscopy). PVP/MMT nanocomposites show exfoliation below 20 wt% MMT and intercalation above this concentration. Nanocomposites retain good optical clarity and increased thermal resistance with MMT content. The compatibility between PVP and MMT and their enhanced properties may be explained by hydrogen bonding interactions. In addition, the nanocomposites prepared under more rigorous mixing conditions show better transparency because the smaller particle sizes are induced. In addition, the study on optically clear PVP/MMT suspensions helps one to understand how optical anisotropy of MMT is affected by the existence of polymer in aqueous solution.     

Co nanoparticle hybridization with single-crystalline Bi nanowires

ABSTRACT: Crystalline Co nanoparticles were hybridized with single-crystalline Bi nanowires simply by annealing Co-coated Bi nanowires at elevated temperatures. An initially near-amorphous Co film of 2-7 nm in thickness began to disrupt its morphology and to be locally transformed into crystallites in the early stage of annealing. The Co film became discontinuous after prolonged annealing, finally leading to isolated, crystalline Co nanoparticles of 8-27 nm in size. This process spontaneously proceeds to reduce the high surface tension and total energy of Co film. The annealing time required for Co nanoparticle formation decreased as annealing temperature increased, reflecting that this transformation occurs by the diffusional flow of Co atoms. The Co nanoparticle formation process was explained by a hole agglomeration and growth mechanism, which is similar to the model suggested by Brandon and Bradshaw, followed by the nanoparticle refinement.