新型哈氏合金G—30的耐蚀性能与工业应用

文章叙述了新型镍基耐蚀哈氏合金G-30在不同介质中的耐蚀性能以及工业应用,综合分析了该合金应用的经济性及前景。     

低相噪,低杂波数字锁相环路滤波器的设计

较详细地分析数字锁相频率合成器的相位噪声，着重用控制论方法对低相噪、低杂波锁相环的环路滤波器进行设计，并用某Ｓ波段频率合成器的实验结果进行了验证。     

Effects of thymectomy and glucocorticoid therapy on peripheral lymphocytes in myasthenia gravis

Clinical manifestations and peripheral blood lymphocyte subset changes were studied in patients with myasthenia gravis (MG) to elucidate the mechanism of clinical improvement following treatment, with thymectomy (Tx) or glucocorticoid (GC) therapy. The changes found were: 1. There was a significant increase in percentages of CD3+, CD29+ CD4+ cells and CD4/CD8 ratio and a significant decrease in percentages of CD8+ and CD16,56+ cells in patients who had never been treated with any immune therapy. 2. After Tx or GC therapy, CD3+ and CD4+, CD29+ cells were decreased, but the number CD19+ and CD16, CD56 cells did not change. 3. Tx had a special effect on CD8+ cells. In most of the patients who showed clinical improvement after Tx, CD8+ cells were increased and CD4/CD8 ratio wad decreased. 4. Anti-acetylcholine receptor (AChRAb) titers were markedly decreased after GC therapy. These results indicate that there were obvious abnormalities in cell-mediated immunity in addition to those in humoral immunity in myasthenia gravis. These abnormalities tended to be normalized after Tx or GC therapy.     

全20CrMnTi表面激光重熔的组织与性能研究

本文对激光重熔20CrMnTi材料表明改性层显微组织分布特征、表面硬度分布规律以及残余应力状态作了研究,结果表明,表面改性层由熔融层、相变硬化层及过渡层组成,且材料表面显微硬度得到大幅度提高,表面硬度达到HV841,约提高4倍。硬化层深度约1mm。残余应力测试得出最大残余应力出现在熔凝带中心,表现为压应力。随着离中心距离的增大,残余应力逐步降低,到熔化带边缘,表现为低幅值压应力;而熔池的外边缘应力在热影响区则转变为拉应力状态。     

Kinetics of modification of the mitochondrial succinate-ubiquinone reductase by 5,5''-dithiobis-(2-nitro-benzoic acid)

In the present study, we examined the effect of the thromboxane/prostaglandin endoperoxide analogue U46619 on proliferation and hypertrophy in cultured rat vascular smooth muscle cells and the roles of protein kinase C and transforming growth factor-beta (TGF-beta) in the mediation of the hypertrophic response to U46619. Since an increase in basic fibroblast growth factor (bFGF) was previously shown to mediate the hypertrophic response to U46619, we also assessed the relationship between bFGF and TGF-beta in the expression of U46619 actions. U46619 increased [35S]methionine incorporation into protein and protein content of vascular smooth muscle cells but had no effect on cell number. A role for TGF-beta was supported by the following observations: (1) exogenous human TGF-beta 1 increased protein synthesis; (2) antibody to TGF-beta blocked both TGF-beta- and U46619-induced increases in protein content; (3) U46619 increased active and total TGF-beta bioactivities; and (4) the actions of U46619 on protein content and TGF-beta bioactivity were blocked by the thromboxane/prostaglandin endoperoxide receptor antagonist SQ 29,548. Previous observations had demonstrated a role for bFGF in the expression of U46619 actions on protein synthesis. Results of the present study suggest that TGF-beta and bFGF interact in mediating the protein synthetic response to U46619. First, the concentration of exogenous TGF-beta (10 pmol/L) alone required to produce a protein synthetic response equivalent to that induced by U46619 was much higher than the concentration of endogenous active TGF-beta that accumulated in the media in response to U46619 (0.7 pmol/L). Second, bFGF (20 ng/mL) increased total TGF-beta bioactivity and stimulated protein synthesis. The hyper-trophic response to bFGF was blocked by anti-TGF-beta. The ability of U46619 and bFGF to increase protein synthesis and protein content in vascular smooth muscle cells was associated with TGF-beta-induced suppression of proliferation, as evidenced by the ability of antibody to TGF-beta to enhance U46619- and bFGF-induced increases in [3H]thymidine incorporation into DNA. Results of the present study also supported a role for protein kinase C in the expression of U46619 and bFGF actions. U46619 increased protein kinase C activity in the particulate fraction of vascular smooth muscle cells. Moreover, the protein kinase C inhibitors GF109203X and staurosporine blocked U46619- and bFGF-induced increases in protein synthesis as well as active and total TGF-beta bioactivities. By contrast, the protein kinase C inhibitors did not prevent the increases in protein synthesis induced by exogenous TGF-beta. The results demonstrate that thromboxane/prostaglandin endoperoxide signals increased TGF-beta bioactivity via protein kinase C. Increases in both bFGF and TGF-beta are required for an optimal hypertrophic response to U46619. The hypertrophic response to TGF-beta occurs through a protein kinase C-independent pathway.     

高速铝箔分卷机的设计

介绍了一种成功开发及应用的高速铝箔分卷机的主要原理及结构特点。     

A Method of Combined SHPB Technique and BP Neural Network to Study Impact Response of Materials

Abstract:  A new method combining the split Hopkinson pressure bar (SHPB) technique with the back-propagation (BP) neural network program is proposed. By this method, the treated strain wave signals become smooth with less noises induced by the transverse inertia. Moreover, the dynamic rate-dependent constitutive behaviour of materials can be identified, without any pre-assumption of a constitutive model. It is found that by taking the experimentally measured data of strain, strain rate and time as 'input' and the corresponding data of stress as 'output' of the BP neural network, the dynamic constitutive behaviour with internal damage or phase transformation evolution is easy to be identified, where the time could represent either the internal damage evolution or phase transformation process accompanied with the deformation process. It is emphasised that the data learnt by the BP neural network must include both loading and unloading processes, if the whole loading and unloading response is to be correctly predicted. The comparisons between the predictions and experimental results are in good agreement for both polyamide (PA) polymer (as an example of nonlinear viscoelastic materials) and Ti–Ni alloy (as an example of superelastic materials with stress-induced phase transformation).     

两种自主开发的图形外延SiGe工艺

使用清华大学微电子学研究所研发的UHV/CVD系统深入研究了图形外延SiGe工艺,分别选用单一的SiO2介质层和SiO2/P0ly-Si复合介质层,作为图形外延SiGe单晶材料的窗口屏蔽介质,开发出了不同的实用化图形外延SiGe工艺.     

A force modulation study on crystallization process in ferroelectric vinylidene fluoride and trifluoroethylene copolymer films

This paper introduces the Force Modulation technique to the study of crystallization process in ferroelectric vinylidene fluoride and trifluoroethylene copolymer films. Using this technique we have successfully visualized ferroelectric crystalline domains and observed that these ferroelectric domains grow out from amorphous phase, unite into strip-like structures, and finally congregate into a union. Force Modulation can weaken the influence of topography on imaging of ferroelectric domains, and reveal more details, which are difficult to be observed in topographical image.     

Effect of the polymer matrices on the dielectric behavior of a percolative high-k polymer composite for embedded capacitor applications

High dielectric constant (high-k) polymer composites are of great interest for embedded capacitor applications. Previously, we demonstrated that epoxy—aluminum composites are promising for embedded capacitor applications, because they have a high dielectric constant and a low dielectric loss due to the core—shell structure of the self-passivated aluminum particles. In this work, to further understand the dielectric behavior of aluminum composites, lower-loss polymers such as silicone, polyimide, polynorbornene, and benzocyclobutene were explored as matrices for the aluminum composites. It is found that the polymer matrices can significantly change the dielectric properties of the aluminum composites. A polymer matrix with a lower dielectric constant generally results in a lower dielectric constant of its aluminum composites. In this regard, polymer—aluminum composites have a similar dielectric characteristic as polymer—ceramic composites. Thermomechanical properties of aluminum composites were characterized by a thermomechanical analyzer.