A Real-Time Video Decoder for Digital HDTV

In this paper, an architecture for real-time digital HDTV video decoding is presented. Our architecture is based on a dual decoding datapath controlled in a fixed schedule with an efficient write-back scheme for anchor pictures. The decoding datapath is synchronized at the block (8 × 8 pixels) level. Unlike other decoding approaches such as the slice bar decoding method and the cross-divide method, our scheme reduces memory access contention problem to achieve real-time HDTV decoding without a high cost in overall decoder buffers, architecture, and bus. In comparison to data-flow approaches, our method eliminates the complexity associated with tagged data operations. Our anchor picture storage is organized to minimize page-breaks during memory accesses. Simulation shows that with a relatively low rate 81 MHz clock, our decoder can decode MPEG-2 MP@HL HDTV in real-time, based on an ATSC video format of 1,920 × 1,080 pixels/frame at 30 frames/s, at a bit rate of 18 to 20 Mbps.     

Effect of External Viscous Load on Head Movement

Quantitative measurements of horizontal head rotation were obtained from normal human subjects intending to make "time optimal" trajectories between targets. By mounting large, lightweight vanes on the head, viscous damping B, up to 15 times normal could be added to the usual mechanical load of the head.     

An iterative FEM for scattering by a 3-D cavity-backed aperture

A finite-element method (FEM)-based hybrid method (or iterative FEM) is successfully applied to a three-dimensional (3-D) scattering problem without the effect of internal resonance. With only a small number of meshes around a 3-D scatterer, this FEM is shown to give an accurate result through several iterative updates of the boundary conditions. To confirm the efficiency of this method, scattering from a 3-D cavity-backed aperture is analyzed and the results obtained are compared with the same obtained by another conventional method     

Image Independent Driving Power Reduction for High Frame Rate LCD Televisions

In this letter, the constant driving power reduction ratio has been achieved for column drivers regardless of the input image by incorporating a new static power reduction scheme into the previous dynamic power reduction method. The measured power reduction ratio is around 50% for a 120 Hz liquid crystal display panel in such cases of still input video and fallback.     

On the selective counting of third-order products

A practical and efficient method is presented for the counting of third-order products generated by an arbitrary number of carriers with arbitrary power spectral shapes. In particular, three selective counting procedures (i.e. sorting by position, sorting by position and group, and sorting by position, group, and kind) are introduced in a systemic way, based upon a discrete third-order Volterra model. The advantage of the counting algorithm is that (1) the algorithm provides the exact counting of third-order products of all eleven possible groups; (2) the counting process requires only two multiplications for the selective counting of third-order products at each position, and the algorithm, which is thus efficient, can be easily implemented     

Effective Polysulfide Rejection by Dipole‐Aligned BaTiO3 Coated Separator in Lithium–Sulfur Batteries

Although the exceptional theoretical specific capacity (1672 mAh g^?1) of elemental sulfur makes lithium–sulfur (Li–S) batteries attractive for upcoming rechargeable battery applications (e.g., electrical vehicles, drones, unmanned aerial vehicles, etc.), insufficient cycle lives of Li–S cells leave a substantial gap before their wide penetration into commercial markets. Among the key features that affect the cyclability, the shuttling process involving polysulfides (PS) dissolution is most fatal. In an effort to suppress this chronic PS shuttling, herein, a separator coated with poled BaTiO₃ or BTO particles is introduced. Permanent dipoles that are formed in the BTO particles upon the application of an electric field can effectively reject PS from passing through the separator via electrostatic repulsion, resulting in significantly improved cyclability, even when a simple mixture of elemental sulfur and conductive carbon is used as a sulfur cathode. The coating of BTO particles also considerably suppresses thermal shrinkage of the poly(ethylene) separator at high temperatures and thus enhances the safety of the cell adopting the given separator. The incorporation of poled particles can be universally applied to a wide range of rechargeable batteries (i.e., metal‐air batteries) that suffer from cross‐contamination of charged species between both electrodes.     

Human centered perceptual adaptation for video coding

Traditional visual saliency based video compression methods try to encode the image with higher quality in the region of saliency. However, the saliency feature changes according to persons, viewpoints, and distances. In this paper, we propose to apply a technique of human centered perceptual computation to improve video coding in the region of human centered perception. To detect the region of interest (ROI) of human body, upper body, frontal face, and profile face, we construct Harr and histogram of oriented gradients features based combo of detectors to analyze a video in the first frame (intra-frame). From the second frame (inter-frame) onward, the optical flow image is computed in the ROI area of the first frame. The optical flow in human centered ROI is then used for macroblock (MB) quantization adjustment in H.264/AVC. For each MB, the quantization parameter (QP) is optimized with density value of optical flow image. The QP optimization process is based on a MB mapping model, which can be calculated by an inverse of the inverse tangent function. The Lagrange multiplier in the rate distortion optimization is also adapted so that the MB distortion at human centered region is minimized. We apply our technique to the H.264 video encoder to improve coding visual quality. By evaluating our scheme with the H.264 reference software, our results show that the proposed algorithm can improve the visual quality of ROI by about 1.01 dB while preserving coding efficiency.     

S/W Based Frame‐Level Synchronization for Irregular Screen Processing System

A multi‐screen environment provides a new opportunity for digital signage applications, where various irregularly shaped screens are employed as an effective means for advertisements and information. A formation method applicable to numerous irregularly shaped screens is proposed to provide a new perspective on digital signage applications. The crucial part of the proposed method comes from the geometric sensing of each screen and the formation of a virtual screen where geometrically aligned content extraction and encoding are employed for content transmission to each screen. In addition, a software‐based synchronization method for the proposed system is proposed to address the frame‐level synchronization between screens. The experimental results of the proposed method show an improved performance of the frame‐level synchronization, where the inconsistency between frames is not identified.     

Text-line extraction in handwritten Chinese documents based on an energy minimization framework

Text-line extraction in unconstrained handwritten documents remains a challenging problem due to nonuniform character scale, spatially varying text orientation, and the interference between text lines. In order to address these problems, we propose a new cost function that considers the interactions between text lines and the curvilinearity of each text line. Precisely, we achieve this goal by introducing normalized measures for them, which are based on an estimated line spacing. We also present an optimization method that exploits the properties of our cost function. Experimental results on a database consisting of 853 handwritten Chinese document images have shown that our method achieves a detection rate of 99.52% and an error rate of 0.32%, which outperforms conventional methods.     

Optimization of Fiber Bragg Gratings Using a Hybrid Optimization Algorithm

A new hybrid optimization algorithm is proposed for the design of a fiber Bragg grating (FBG) with complex characteristics. The hybrid algorithm is a two-tier search that employs a global optimization algorithm (i.e., the staged continuous tabu search (SCTS) algorithm) and a local optimization method (i.e., the quasi-Newton method). First, the SCTS global optimization algorithm is used to find a "promising" FBG structure that has a spectral response as close as possible to the targeted spectral response. Then, a local optimization method, namely, the quasi- Newton method, is applied to further optimize the promising FBG structure obtained from the SCTS algorithm to arrive at a targeted spectral response. To demonstrate the effectiveness of the method, the design and fabrication of an optical bandpass filter are presented.