A frame‐based EM‐simulation for design of LC oscillator with MoM capacitor banks

This article presents a simulation method for the design of a digitally controlled oscillator (DCO). Electromagnetic (EM) simulations are essential and inevitable for modern LC oscillator design. Although EM‐simulators provide high accuracy, the EM‐simulation time is very long when metal‐oxide‐metal (MoM) capacitors are present. The proposed frame‐based EM‐simulation can significantly reduce the EM‐simulation time even in the presence of MoM capacitors without influencing the accuracy. To verify the proposed method, a DCO was fabricated using a 55‐nm CMOS process. Measurements of the DCO are in good agreement with the frame‐based post‐layout simulation results. In addition, the DCO has good performances with a low power consumption of approximately 0.68 mW.     

A low‐complexity design for distributed containment control of networked pure‐feedback systems and its application to fault‐tolerant control

This paper addresses a low‐complexity distributed containment control problem and its extension to fault‐tolerant control for networked nonlinear pure‐feedback systems under a directed graph. The multiple dynamic leaders are neighbors of only a subset of the followers described by completely non‐affine multi‐input multi‐output pure‐feedback dynamics. It is assumed that all followers' nonlinearities are heterogeneous and unknown. The proposed containment controller is implemented by using only error surfaces integrated by performance bounding functions and does not require any differential equations for compensating uncertainties and faults. Thus, compared with the previous containment control approaches for multi‐agent systems with unknown non‐affine nonlinearities, the distributed containment control structure is simplified. In addition, it is shown that the proposed control scheme can be applied to the fault‐tolerant containment control problem in the presence of unexpected system and actuator faults, without reconstructing any control structure. It is shown from Lyapunov stability theorem that all followers nearly converge to the dynamic convex hull spanned by the dynamic leaders and the containment control errors are preserved within certain given predefined bounds. Copyright © 2016 John Wiley & Sons, Ltd.     

Adaptive Output Feedback Control of Flexible-Joint Robots Using Neural Networks: Dynamic Surface Design Approach

In this paper, we propose a new robust output feedback control approach for flexible-joint electrically driven (FJED) robots via the observer dynamic surface design technique. The proposed method only requires position measurements of the FJED robots. To estimate the link and actuator velocity information of the FJED robots with model uncertainties, we develop an adaptive observer using self-recurrent wavelet neural networks (SRWNNs). The SRWNNs are used to approximate model uncertainties in both robot (link) dynamics and actuator dynamics, and all their weights are trained online. Based on the designed observer, the link position tracking controller using the estimated states is induced from the dynamic surface design procedure. Therefore, the proposed controller can be designed more simply than the observer backstepping controller. From the Lyapunov stability analysis, it is shown that all signals in a closed-loop adaptive system are uniformly ultimately bounded. Finally, the simulation results on a three-link FJED robot are presented to validate the good position tracking performance and robustness of the proposed control system against payload uncertainties and external disturbances.     

Proteomics in diabetic nephropathy

Diabetes mellitus (DM) is currently one of the principal causes of end stage renal disease (ESRD). Approximately 40% of all diabetic patients eventually develop diabetic nephropathy (DN). The complexity of diabetes and its complications require a broad-based, unbiased, scientific approach, such as proteomics, in order to understand the progression of DN. Proteomic techniques have been applied extensively to explore the complexity of the mechanisms associated with DN, and to identify novel biomarkers and therapeutic targets. This review provides insights into how proteomics can be applied to DN, and how experimental data can be linked to clinical applications. In addition, recent proteome studies of DN are summarized. The rapid rate of development of the relevant technologies, along with the combination of classic physiological and biochemical techniques with proteomics will facilitate new discoveries.     

Dynamic diamond anvil cell (dDAC): a novel device for studying the dynamic-pressure properties of materials

We have developed a unique device, a dynamic diamond anvil cell (dDAC), which repetitively applies a time-dependent load/pressure profile to a sample. This capability allows studies of the kinetics of phase transitions and metastable phases at compression (strain) rates of up to 500 GPa/s (approximately 0.16 s(-1) for a metal). Our approach adapts electromechanical piezoelectric actuators to a conventional diamond anvil cell design, which enables precise specification and control of a time-dependent applied load/pressure. Existing DAC instrumentation and experimental techniques are easily adapted to the dDAC to measure the properties of a sample under the varying load/pressure conditions. This capability addresses the sparsely studied regime of dynamic phenomena between static research (diamond anvil cells and large volume presses) and dynamic shock-driven experiments (gas guns, explosive, and laser shock). We present an overview of a variety of experimental measurements that can be made with this device.     

Anionic synthesis of ω-1,1-diphenylethylene-terminated polystyrene macromonomers. Rational synthesis of ABC hetero three-armed-star-branched polymers

Summary Polystyrene macromonomers with terminal 1,1-diphenylethylene functionality were prepared by the reaction of one equivalent of poly(styryl)lithium with 1,4-bis (l-phenylethenyl)benzene (PDDPE). The macromonomer functionalities were determined by ¹H NMR [(vinyl CH₂)=5.4 ppm] and UV spectroscopy (_max=260 nm). The stoichiometric linking reaction of poly(styryl)lithium (M_n=15.3x10³ g/mol) with an -1,1-diphenylethylene-terminated polystyrene macromonomer (M_n=5.4x10³ g/mol) followed by addition of styrene monomer has been used to prepare a hetero three-armed, star-branched polymer with M_n=5.8x10⁴ g/mol (5,400-15,300-37,300). The g value ([]b/[]l) was equal to 0.92.     

A 231-MHz, 2.18-mW 32-bit Logarithmic Arithmetic Unit for Fixed-Point 3-D Graphics System

A 32-bit fixed-point logarithmic arithmetic unit is proposed for the possible application to mobile three-dimensional (3-D) graphics system. The proposed logarithmic arithmetic unit performs division, reciprocal, square-root, reciprocal-square-root and square operations in two clock cycles and powering operation in four clock cycles. It can program its number range for accurate computation flexibility of 3-D graphics pipeline and eight -region piecewise linear approximation model for logarithmic and antilogarithmic conversion to reduce the operation error under 0.2%. Its test chip is implemented by 1-poly 6-metal 0.18-mum CMOS technology with 9-k gates. It operates at the maximum frequency of 231 MHz and consumes 2.18 mW at 1.8-V supply     

Synchronized transform-limited operation of 10-GHz colliding pulse mode-locked laser

We report a 10-GHz colliding pulse mode-locked laser fabricated with integrated active-passive waveguides. The laser fabrication adopted a deep reactive ion etching and single-step metal-organic vapor phase epitaxy regrowth process for forming the buried heterostructure waveguide. Clean output pulses resulted from laterally tilting the active-passive interface and effectively suppressing residual back-reflections at the interface. Hybrid mode-locking resulted in a synchronized transform-limited sech/sup 2/optical waveform. Pulsewidth, chirp, timing jitter, and frequency-locking range were investigated through systematic device biasing condition optimization.     

Flooding limited CHF in a vertical 3 × 3 rod bundle with non-uniform axial heat flux

KAERI has performed an experimental study on the critical heat flux (CHF) under zero flow conditions with a non-uniformly heated 3 × 3 rod bundle. Experimental conditions are in the range of a system pressure from 0.50 to 14.96 MPa and inlet water subcooling enthalpies from 68 to 352 kJ/kg. The test section used in the present experiments consisted of a vertical flow channel, upper and lower plenums, and a non-uniformly heated 3 × 3 rod bundle. The experimental results show that the CHFs in low-pressure conditions are somewhat scattered within a narrow range. As the system pressure increases, however, the CHFs show a good parametric trend. The CHFs occur in the upper region of the heated section, but the locations of the detected CHFs move gradually in a downward direction with the increase of the system pressure. Even though the effects of the inlet water subcooling enthalpies and system pressure of the flooding CHF are relatively smaller than those of the flow boiling CHF, the CHF increases by increasing the inlet water subcooling enthalpies. Several existing correlations for the countercurrent flooding CHF based on Wallis's flooding correlation and Kutateladze's criterion for the onset of flooding are compared with the CHF data obtained in the present experiments to examine the applicability of the correlations.     

Microstructural and piezoelectric properties of low temperature sintering PMN-PZT ceramics with the amount of Li2CO3 addition

PMN-PZT ceramics doped with Li₂CO₃ and Bi₂O₃ as sintering aids were manufactured in order to develop the low temperature sintering ceramics for multilayer piezoelectric transformer, and their micro structural, dielectric and piezoelectric properties were investigated. The sintering aids were proved to lower the sintering temperature of doped PMN-PZT ceramics due to the effect of LiBiO₂ liquid phase. Optimal values for multilayer piezoelectric transformer application, such as electromechanical coupling factor (k_p) of 0.50, mechanical quality factor (Q_m) of 2264, and dielectric constant (K) of 1216, and curie temperature (T_c) of 317 °C were found at 0.1 wt.% Li₂CO₃ added ceramics sintered at 940 °C.