Subchannel analysis of a fast reactor cooled by supercritical light water

The concept of a high temperature fast reactor cooled by supercritical water (SCFR-H) was developed for achieving high thermal efficiency and a compact reactor system. The core characteristics were obtained from single channel thermal-hydraulic analysis. Thus, it is necessary to carry out subchannel analysis to estimate the effect of local power peaking and cross flows. For this purpose, a subchannel analysis code is developed. It is verified by comparing the results with experimental data of High Conversion Pressurized Water Reactor (HCPWR). Sensitivities of the outlet coolant and cladding temperature to the subchannel flow area and local power peaking are high. One of the reasons is that the ratio of the coolant flow rate of SCFR-H to the power is smaller than that of LWR. Another reason is that, temperature of supercritical water is more sensitive to the enthalpy change above 450°C. The outlet coolant temperature distribution can be flattened by reducing the area of the peripheral subchannels and by enhancing the mixing between the subchannels.     

In Vivo Dynamic Movement of Polymerized Amyloid β in the Perivascular Space of the Cerebral Cortex in Mice

Disposition of amyloid β (Aβ) into the perivascular space of the cerebral cortex has been recently suggested as a major source of its clearance, and its disturbance may be involved in the pathogenesis of cerebral amyloid angiopathy and Alzheimer’s disease. Here, we explored the in vivo dynamics of Aβ in the perivascular space of anesthetized mice. Live images were obtained with two-photon microscopy through a closed cranial window. Either fluorescent-dye-labeled Aβ oligomers prepared freshly or Aβ fibrils after 6 days of incubation at 37 °C were placed over the cerebral cortex. Accumulation of Aβ was observed in the localized perivascular space of the penetrating arteries and veins. Transportation of the accumulated Aβ along the vessels was slow and associated with changes in shape. Aβ oligomers were transported smoothly and separately, whereas Aβ fibrils formed a mass and moved slowly. Parenchymal accumulation of Aβ oligomers, as well as Aβ fibrils along capillaries, increased gradually. In conclusion, we confirmed Aβ transportation between the cortical surface and the deeper parenchyma through the perivascular space that may be affected by the peptide polymerization. Facilitation of Aβ excretion through the system can be a key target in treating Alzheimer’s disease.     

A method for compensating customer voltage drops due to nighttime simultaneous charging of evs utilizing reactive power injection from battery chargers

When we consider global warming, the reduction of CO₂ emissions is one of the most important issues which require urgent solutions. One option is to integrate low‐CO₂‐emission generators to the grid as much as possible. Another option is to replace ine?cient vehicles based on internal‐combustion engines with electric ones (EVs). Due to the latter, we can easily predict that most consumers will charge EVs' batteries during nighttime. Thus, excessive voltage drops due to nighttime simultaneous charging are expected to be a possible future problem. This paper proposes a method for compensating the voltage drops by injecting reactive power from EV battery chargers. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 184(1): 19–29, 2013; Published online in Wiley Online Library (wileyonlinelibrary.com). DOI 10.1002/eej.22390     

Analytical method of hydramethylnon in agricultural products by LC-MS/MS

A simple determination method of hydramethylnon in agricultural products by liquid chromatography-tandem mass spectrometry (LC-MS/MS) was developed. The sample was homogenized with phosphoric acid and extracted with acetone. An aliquot of crude extract was re-extracted with hexane and sat. NaCl solution. In the case of tea leaf, solidification processing using ammonium chloride and phosphoric acid was performed before re-extraction with hexane. Clean-up was performed using a silica-gel mini column (500 mg). The LC separation was performed on a C18 column using methanol-water (8 : 2) containing 10 mM ammonium acetate as the mobile phase and MS detection with positive ion electrospray ionization. The calibration curve was linear between 0.002-0.2 μg/mL of hydramethylnon. Recoveries (n=5) of hydromethylnon from 10 kinds of agricultural products fortified at 0.01 μg/g (0.05 μg/g for pineapple) were 82-110%, and their relative standard deviations were 2-12%.     

Lithium intercalation reaction into the Keggin type polyoxomolybdates

The electrochemical property of Keggin type hetero polyoxomolybdate K₃[PMo₁₂O₄₀] (KPM) as the cathode electrode material for lithium battery was examined. KPM showed charge-discharge performance in the potential region from 4.2 V to 1.5 V with capacity of over 200 mAh g⁻¹. From the result of the ex situ XRD measurement, it is presumed that the electrochemical reaction of KPM proceeds via the lithium (de-)intercalation. The cycle performance of KPM is largely dependent on the charge-discharge potential range. The capacity fade caused by deep discharging seems to be concerned to the 〈 to ® isomerization of KPM.     

Study of choked flows through a convergent nozzle

When sonic nozzles of significantly smaller diameter are used as standard flow meters,the critical
back pressure ratio is affected by the boundary layer at the nozzle throat.However,the effect of the
boundary layer on choking criteria is still controversial.Then,the choking phenomenon of a convergent
nozzle flow has been experimentally investigated using four convergent nozzles with the same
diameter followed by a straight pipe of a variable length.As a result,it is shown that the critical back
pressure ratio is smaller than that for the steady one-dimensional is-entropic flow and decreases as the
boundary layer thickness increases.Moreover,the main flow Mach number at the nozzle exit is
supersonic when the back pressure ratio is equivalent to the choking condition,and the Mach number
increases as the boundary layer thickness increases.     

Analysis of fuel rod behavior under normal operating conditions in Super Fast Reactor

A Super Fast Reactor is a pressure-vessel type, fast spectrum supercritical water-cooled reactor (SCWR) that is presently researched in a Japanese project. A preliminary core has been designed with 1.59E+06 W/m³ of power density [1]. In order to ensure the fuel rod integrity, the fuel rod behaviors under the normal operating conditions are analyzed using FEMAXI-6 code. Three types of the limiting fuel rods, with the maximum cladding surface temperature (MCST), maximum power peak (MPP) and maximum discharge burnup (MDB), are chosen to cover all the fuel rods in the core. The power histories of these fuel rods are taken from the neutronics calculation results in the core design. The available design range of the fuel rod design parameters, such as the initial gas plenum pressure, gas plenum length, grain size and pellet-cladding gap size, are found out in order to satisfy the following design criteria: (1) Maximum fuel centerline temperature should be less than 1900 °C. (2) Maximum cladding stress in circumstance direction should be less than 100 MPa. (3) Pressure difference on the cladding should be less than 1/3 of buckling collapse pressure. (4) Compressive stress to yield strength ratio should be less than 0.2. (5) Cumulative damage fraction (CDF) on the cladding should be less than 1.0. Finally the improved fuel rod design is proposed.     

Small-scale hydrogen liquefaction with a two-stage Gifford–McMahon cycle refrigerator

We manufactured a small-scale hydrogen liquefier with a two-stage 10 K Gifford–McMahon cycle (GM) refrigerator. It had a hydrogen tank with the volume of 30 L that was surrounded by a radiation shield. This liquefier continuously liquefied gaseous hydrogen with the volumetric flow rate of 12.1 NL/min. It corresponds to the liquefaction rate of 19.9 L/day for liquid hydrogen. We proposed a simple estimation method for the liquefaction rate and confirmed that the estimation method well explained the experimental result. To evaluate the estimation method, we applied the estimation method to other liquefiers. In case of a liquefier with the GM refrigerator, we confirmed the estimation method was available for predicting the liquefaction rate. However, in case of a liquefier with the pulse tube refrigerator, the results of the estimation indicated small values as compared with the experimental data. We discuss the details about the estimation method of the liquefaction rate for the small-scale liquefiers.     

PRECIPITATION BEHAVIOR IN A Cu—Sn—Ni—Zn—P LEAD FRAME MATERIAL

Transmission electron microscopy (TEM) observations were carried out for examining the precipitation behavior in a Cu-Sn-Ni-Zn-P lead frame material. TEM observations revealed that the precipitate is hexagonal Ni5P2 and the orientation relationship between the Cu matrix and Ni$Pi precipitate is (111)fcc//(0001)hcp, [101]fcc//[1120]hcp, where the suffix fcc denotes the Cu matrix and hep denotes the hexagonal Ni5P2 precipitate. The Ni5P2 precipitate is ovoidal in shape at the beginning of aging at lower temperature. By prolonging the aging time or increasing the aging temperature, Ni5P2 precipitate grows and shows a rod-like shape. The Ni added Cu based lead frame material has a comparative mechanical properties with that of TAMAC15 which has been developed and used in electrical industry.     

Fluid flow and heat transfer in the transition process of natural convection over an inclined plate

The present study deals with fluid flow and heat transfer in the transition process of natural convection over an inclined plate. In order to examine the mechanism of the transition process, experiments on the flow and heat transfer were performed for various plate inclination angles in the range of 20 to 75°. The wall temperature and fluid flow fields were visualized using a liquid crystal sheet and fluorescent paint, respectively. The visualization confirmed that separation of a boundary layer flow took place, and the onset point of streaks appeared over the plate wall when the modified Rayleigh number exceeded a characteristic value for each inclination angle. The local Nusselt number in the transition range was proportional to the one‐third power of the local modified Rayleigh number. By introducing a nondimensional parameter, a new correlation between visualizations of the flow and temperature fields and heat transfer was proposed. © 2001 Scripta Technica, Heat Trans Asian Res, 30(8): 648–659, 2001