A method to determine direct‐ and quadrature‐axis inductances of permanent magnet synchronous motors

The equivalent circuit constants of permanent magnet synchronous motors are needed in the calculation of operation characteristics, construction of a control system, etc. These constants can be computed from the data on structural form and materials. However, measurements are necessary to obtain highly precise values. Methods for measurement of the d‐ and q‐axis inductances can be roughly divided into rotational and standstill methods. The standstill methods have the advantage that they are easy to carry out. However, it is difficult to consider magnetic saturation and distortion of the change in the armature winding inductance. The accuracy of the standstill method can be improved if these effects can be readily taken into account. This paper describes a standstill method for measuring accurate d‐ and q‐axis synchronous inductances of permanent magnet synchronous motors. By utilizing the fact that the EMF interference terms in the motor voltage equation considering the distortion of the inductance change are equal to zero when the rotor is in a specific position, the proposed method determines the inductances considering both magnetic saturation and inductance distortion effects from simple off‐line standstill testing. In addition, this method is capable of taking cross‐magnetic saturation into account when used with the necessary testing equipment. The proposed method was implemented on a 0.4‐kW interior permanent magnet synchronous motor with concentrated stator winding. The validity of the proposed method was demonstrated by comparing the measured and calculated results of the no‐load and on‐load characteristics. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 171(3): 41–50, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20969     

Electroelastic Response of Cylindrical Fiber with D∞ Symmetry Exposed to Local Electric Field Through Opposed Electrode Pair

To obtain practical information on the electroelastic behavior of poly-l-lactic acid microtweezers or catheters, a previously constructed analytical technique is used to obtain the electroelastic field solution of a poly-l-lactic acid cylindrical fiber exposed to a local electric field, which is applied through an opposed pair of square-sectioned electrodes. The numerical representation of the solution reveals the detailed field quantity distributions, their importance in the design of microtweezers and catheters, the overall deformation of such devices, and the effects of the electrode dimensions on the deformation.     

In Vivo Simultaneous Analysis of Gene Expression by Dual-Color Luciferases in Caenorhabditis elegans

Both fluorescent and luminescent observation are widely used to examine real-time gene expression patterns in living organisms. Several fluuorescent and luminescent proteins with specific optical properties have been developed and applied for simultaneous, multi-color observation of more than two gene expression profiles. Compared to fluorescent proteins, however, the application of multi-color luminescent imaging in living organisms is still limited. In this study, we introduced two-color luciferases into the soil nematode C. elegans and performed simultaneous analysis of two gene expression profiles. Using a green-emitting luciferase Eluc (emerald luciferase) and red-emitting luciferase SLR (stable luciferase red), the expression patterns of two genes were simultaneously observed in single animals from embryonic to adult stages over its whole life span. In addition, dual gene activities were observed at the single embryo level, with the simultaneous observation of morphological changes. These are the first application of a two-color luciferase system into a whole animal and suggest that precise relationship of expression patterns of multiple genes of interest can be analyzed over the whole life of the animal, dependent on the changes in genetic and/or environmental conditions.     

Starting method of a superconducting generator in a combined‐cycle power plant

In the combined‐cycle power plant generators are started by using the igniting arrangement up to the ignition rotational speed of the gas turbine. On the other hand, in the case of using the superconducting generator, it is difficult to apply the igniting arrangement used to generate electricity on the combined cycle for the structure as is. We examined the induction motor starting method for the superconducting generator by using the 70‐MW‐class quick‐response excitation superconducting model generator and the VVVF power supply. From the examination, we confirmed the ability to raise the rotational speed from 6 to 360 rpm. Moreover, it was found to be able to start 200‐MW‐class superconducting generators by the induction motor starting method with the analysis. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 160(2): 30– 38, 2007; Published online in Wiley InterScience ( www.interscience. wiley.com ). DOI 10.1002/eej.20283     

Two‐dimensional unsteady heat conduction analysis with heat generation by triple‐reciprocity BEM

If the initial temperature is assumed to be constant, a domain integral is not needed to solve unsteady heat conduction problems without heat generation using the boundary element method (BEM).However, with heat generation or a non‐uniform initial temperature distribution, the domain integral is necessary. This paper demonstrates that two‐dimensional problems of unsteady heat conduction with heat generation and a non‐uniform initial temperature distribution can be solved approximately without the domain integral by the triple‐reciprocity boundary element method. In this method, heat generation and the initial temperature distribution are interpolated using the boundary integral equation. Copyright © 2001 John Wiley & Sons, Ltd.     

Group Symmetry in Interior-Point Methods for Semidefinite Program

A class of group symmetric Semi-Definite Program (SDP) is introduced by using the framework of group representation theory. It is proved that the central path and several search directions of primal-dual interior-point methods are group symmetric. Preservation of group symmetry along the search direction theoretically guarantees that the numerically obtained optimal solution is group symmetric. As an illustrative example, we show that the optimization problem of a symmetric truss under frequency constraints can be formulated as a group symmetric SDP. Numerical experiments using an interior-point algorithm demonstrate convergence to strictly group symmetric solutions.     

On a fast reactor cycle scheme that incorporates a thoria-based minor actinide-containing cermet fuel

A fast reactor cycle scheme that incorporates a thoria-based minor actinide-containing cermet fuel is given. The present cermet fuel consists of an oxide solid solution of Th and minor actinides and Mo-inert matrix. It has been proposed as a high-performance device that can enhance minor actinide incineration in a fast reactor cycle. It is used in an independent small sub-cycle, whereby dedicated cycle technologies are adopted. Two-step reprocessing process was proposed for the present cermet fuel; it consists of a pre-removal of Mo-inert matrix and an actinide recovery. A preliminary test for the pre-removal of Mo-inert matrix was carried out using a surrogate cermet fuel. Burnup characteristics of a fast reactor core loaded with the cermet fuel were investigated by using neutronic calculation codes. It was revealed that a heterogeneous composition of Mo-inert matrix in inner and outer cores may lead to an effective transmutation of minor actinides and a flattened power density. It was concluded that the present cermet fuel was potentially promising as a high-performance incineration device of minor actinides for fast reactors.     

Effect of catalyst combination on growth of single-walled carbon nanotubes

A new effective catalysts combination of iron — nickel for alcohol CVD technique was found. This catalyst catalyzed well as well as the typical catalyst of iron — cobalt catalysts, but gave a different diameter distribution. Calculating their electrical density of states under the assumption of their solid lattice structures, the result was fairly consistent with experimental results. The number of electrical states near Fermi level that is considered to be important for catalytic reaction is enough and the DOS of iron – nickel catalyst was quite similar to that of cobalt unlike manganese – copper catalyst. Consequently, a blend of catalysts that has a similar DOS to cobalt and has enough states near the Fermi level can be a good catalyst for alcohol CVD.     

Spatiotemporal Magnetocaloric Microenvironment for Guiding the Fate of Biodegradable Polymer Implants

The degradation behavior of implants is significantly important for bone repair. However, it is still unprocurable to spatiotemporally regulate the degradation of the implants to match bone ingrowth. In this paper, a magneto-controlled biodegradation model is established to explore the degradation behavior of magnetic scaffolds in a magnetothermal microenvironment generated by an alternating magnetic field (AMF). The results demonstrate that the scaffolds can be heated by magnetic nanoparticles (NPs) under AMF, which dramatically accelerated scaffold degradation. Especially, magnetic NPs modified by oleic acid with a better interface compatibility exhibit a greater heating efficiency to further facilitate the degradation. Furthermore, the molecular dynamics simulations reveal that the enhanced motion correlation between magnetic NPs and polymer matrix can accelerate the energy transfer. As a proof-of-concept, the feasibility of magneto-controlled degradation for implants is demonstrated, and an optimizing strategy for better heating efficiency of nanomaterials is provided, which may have great instructive significance for clinical medicine.