SiC nanorods prepared from SiO and activated carbon

SiC nanorods with 20–100 nm diameter and 10–100 m length were synthesized by reaction between SiO and amorphous activated carbon (AAC) at 1380°C. Microstructural characterization of the SiC nanorods was carried out by high resolution transmission electron microscopy (HRTEM) and energy dispersive spectroscopy (EDS). The SiC nanorods grow on either a chain or from facets of SiC nanoparticles. They are usually straight and preferentially orientated along the [111] direction. Branching phenomenon exists for these nanorods. Typical SiC nanorod tip was analyzed by HRTEM image and EDS analysis. Based on an experimental analysis, a formation mechanism is proposed to explain the microstructural characterization of the SiC nanorods.     

Implementation of Fault-Tolerant GridRPC Applications

A task parallel application is implemented with Ninf-G, a GridRPC system. A series of experiments are conducted on the Grid testbed in Asia Pacific for three months. Through tens of long executions, typical fault patterns were collected, and instability of the network throughput was determined to be a major reason of the faults. Several important points are stressed to avoid task throughput decline due to the fault-recovery operations: Timeout minimization for fault detection, background recovery, redundant task assignments, and so on. This study also issues a steer for design of the automated fault-tolerant mechanism in an upper layer of the GridRPC framework.     

Preparation of Lanthanum Nickel Oxide-Coated Ni Sheet Anodes and Their Application to Electrolytic Production of (CF3)3N in (CH3)4NF·4.0HF Melt

A new process for electrolytic production of a perfluorinated compound, (CF₃)₃N, using lanthanum nickel oxide-coated Ni sheet anode in the (CH₃)₄NF·4.0HF melt at room temperature, was developed. Thin films of the lanthanum nickel oxides were prepared on Ni sheets by sol-gel coating method using polyvinlylpyrrolidone(PVP). The main components of the thin films were La₂O₃, LaNiO₃, and La₂NiO₄ at 500, 750 and 1000 °C, respectively. The anode performance in the (CH₃)₄NF·4.0HF melt depends greatly on the main component of the thin film, and the LaNiO₃-coated Ni sheet anode gives the best anode performance. The potential of LaNiO₃-coated Ni sheet anode remains constant at 5.9 V during electrolysis at 20 mA·cm⁻² in the (CH₃)4NF·4.0HF melt for 100 h. This is because LaNiO₃ and NiF₃, and/or Ni₂F₅, the latter of which was formed during electrolysis, in the film give a high electronic conductivity to the surface film during electrolysis. The maximum mole fraction of (CF₃)₃N (21.4%) was obtained at 20 mA·cm⁻² in (CH₃)₄NF·4.0HF melt using the LaNiO₃-coated Ni sheet.     

Reliable indirect competitive ELISA used for a survey of ochratoxin A in green coffee from the North of Paraná State, Brazil.

The performance of an indirect competitive enzyme-linked immunosorbent assay (ic-ELISA) based on a monoclonal antibody (mAb) for ochratoxin A (OTA) detection was evaluated in a comparative study with high-performance liquid chromatography (HPLC) analysis using 68 freshly harvested coffee samples from the North of Paraná State, Brazil. The anti-OTA mAb showed high specificity and low cross-reactivity with OTA analogues (OTB and OTalpha), but cross-reacted with OTC. This ic-ELISA showed a detection limit of 3.75 ngg-1 sample, when compared to 0.80 ngg-1 by HPLC, with an ic-ELISA/HPLC correlation coefficient of 0.90. As regards OTA analysis of these coffee samples, natural contamination was detected in 10 samples (14.7%) by both methods, where the ic-ELISA values (range 3.9-7.3 ngg-1) were 1.1 to 1.6-fold higher than HPLC data (2.7-4.7 ngg-1). Five samples (7.4%) were OTA positive (range 0.84-1.30 ngg-1) only by HPLC assay, probably due to the higher detection limit reached by ic-ELISA. OTA was undetectable in 53 samples (77.9%) by both methods, while all positive samples (range 0.84-7.30 ngg-1) showed OTA levels lower than 8 ngg-1 (maximum limit recommended by the European Union). The matrix interference of green coffee was minimized by dilution of sample extracts before carrying out the ELISA assay. This mAb-based ic-ELISA can be effectively applied for OTA screening in coffee, because it is simple, sensitive and sample preparation is easy.     

An immunodominant haptenic epitope of carbamazepine detected in serum from patients given long-term treatment with carbamazepine without allergic reaction

An anticarbamazepine antibody was detected in the serum of a patient with severe carbamazepine-induced serum sickness. We found that the patient's T cells and IgG antibody recognized an epitope which appeared in subjects showing an allergic reaction, as well as that in subjects who showed no allergic reaction, after long-term carbamazepine therapy. These results show that an anti-carbamazepine immune response does not occur in the majority of subjects who undergo long-term carbamazepine therapy without developing allergic symptoms, although the immunodominant haptenic epitope of carbamazepine is present in their sera.     

Measurement and correlation of mutual diffusion coefficients for styrene-butadiene rubber(SBR)-n-nonane systems

The mutual diffusion coefficients for styrene-butadiene rubber(SBR)-n-nonane systems were measured using a sorption apparatus with a quartz spring at 100 and 130°C for mass fractions of n-nonane ranging from 0 to 0.16. The mutual diffusion coefficients were correlated with good agreement by the free-volume theory.     

Computation of thermodynamic properties of liquid ferrous alloys from structural measurements

Relation between X-ray scattering intensities, mean square thermal fluctuations and thermodynamic properties. High temperature X-ray diffraction study of liquid Fe-Ni and Fe-Si alloys using reflection and transmission geometries. Calculation of the structure factor as a function of wave vector. Extrapolation to zero wave vector. Calculation of the concentration-concentration correlation function defined by A. B. Bhatia and D. E. Thorton. Computation of thermodynamic quantities of mixing ΔG, ΔH and ΔS for the binary alloys. Comparison with direct thermodynamic measurements reported in the literature.     

Superconducting to normal transition of type-II Ta by a rectangular current pulse

The superconducting to normal transition by a rectangular pulse current in type-II Ta has been investigated. The potential drop along the specimen is observed as a function of time. The voltage pattern and the magnitude of the potential drop are obtained as functions of current amplitude, temperature, externally applied magnetic field, the angle between magnetic field and specimen axis, and values. The transition mechanisms are discussed. It is also shown in this experiment that the flux flow or flux creep and flux jump occur. A support to the paramagnetic current flow in the presence of longitudinal magnetic field is given.     

Syntheses and properties of B-C-N and BN nanostructures

The current status of research on boron-carbon-nitrogen (B-C-N) and boron nitride (BN) nanotubes is presented. The latest achievements in syntheses, analyses and property measurements of these nanoscale tubular architectures are reviewed. The characteristic features of B-C-N and BN nanotubes, compared with conventional C nanotubes, are paid special attention. In particular, the latest breakthroughs in the chemical vapour deposition synthesis of BN nanotubes and an insight into their unique structures are highlighted. A wide range of potential applications is also envisaged, based on the recent progress, which includes pioneering results in BN nanocable fabrication, gas adsorption, electron transport and field emission measurements.