Design and characteristics of optical fiber unit for submarine cable

An optimum design method is presented for a "spaceless" unit structure in submarine optical fiber cable. The unit structure has been designed taking into consideration the loss increase caused by both a 40-km-long winding unit and a temperature change of 100°C. An appropriate jacket thickness and hardness was found which satisfies these requirements.     

Study on sustainable redevelopment of a densely built-up area in Tokyo by introducing a distributed local energy supply system

“Distributed local energy systems” had been expected to rationalize the supply of energy to built-up areas, but until now very little research has been performed to estimate the effect of their application to actual cities. In this research, therefore, a future vision for the year 2030 in the Sancha Area (SANCHA VISION 2030), a typical densely built-up area in Tokyo, has been elaborated including a simulation to estimate benefits from the application of distributed energy systems in terms of reduced energy consumption and CO₂ emissions as well as mitigation of the heat-island phenomenon. As a result, it was demonstrated that a “distributed local energy system”, which provides a district with both electrical power and heat through an integrated distribution system, may contribute to a considerable improvement in energy efficiency for those areas. In addition, it may also provide other benefits, including enhancement of living amenity and urban security in times of emergency.     

Characteristics of a crossed-wire scatterer without a junction point of an incident wave of circular polarization

A crossed-wire scatterer has the wires displaced in the backscattering direction, and is able to scatter an incident wave of circular polarization in such a way that the backscattering wave has the same rotational sense as that of the incident wave. The radiation performance of the scatterer is improved by bending the horizontal and the vertical wires. Arrays consisting of crossed-wire scatterers are constructed and the backscattering cross sections (BSCS's) are calculated. It is revealed that the increase in the current amplitude due to the mutual effects among the array elements contributes to enhancement in the BSCS. It is also shown that a maximum value of the BSCS of an array of3 times 3bent crossed-wire scatterers is 1.8 times as large as that of a dihedral corner reflector which has the same aperture area. The BSCS's as a function of the angle of incidence are presented with experimental results at a frequency of 9.375 GHz.     

Application of a chemical heat pump to a cogeneration system

The feasibility of a proposed system that combines a magnesium oxide/water chemical heat pump and a diesel engine as a cogeneration system is discussed based on experimental results. The combined system is intended to utilize the waste heat discharge from the engine by means of the chemical heat pump and to level the heat supply load of the engine, allowing enhanced energy utilization. The thermal performance of the chemical heat pump in the cogeneration system is estimated based on the results of a packed‐bed experiment. The estimation indicates that by storing the waste heat from the engine during low demand periods, the cogeneration system can produce more than several times the standard thermal output of the diesel engine during peak demand periods. Copyright © 2001 John Wiley & Sons, Ltd.     

Integrated optical-disk pickup that uses a focusing grating coupler with a high numerical aperture

An integrated optical-disk pickup that uses a focusing grating coupler with a numerical aperture of 0.45 (a focal length of 1.0 mm and an aperture of 1.0 mm × 0.8 mm) was developed, and the readout signal on an International Standards Organization (ISO) -formatted 90-mm optical disk was detected by the pickup. The signal-amplitude ratio of the minimum-limit data pattern to the maximum was 0.53 on the innermost track. It meets the requirement on the signal resolution for optical-disk storage devices.     

Phonon anomalies in YNi2 11B2C

Recently we have discovered a new peak with phonon character which appears only below T_c in an intermetallic superconductor, YNi₂ ¹¹B₂C (Tc14-2K) by neutron inelastic scattering measurements. The peak intensity of the new peak shows the order-parameter-like temperature dependence of the superconductivity. The new peak grows by absorbing the spectral weight from the above-lying soft phonon mode. In the present study we investigate the magnetic field dependence of the new peak. With increasing magnetic field, the new peak is gradually suppressed and disappears by H=H_c2 (4.7T at T=5.5K). Beyond H_c2, the profile of the scattering function recovers that of the non-superconducting state above T_c These results strongly indicate that this new peak is undoubtedly associated with the superconducting state in YNi₂ ¹¹B₂C.     

Study of prediagnostic selenium level in toenails and the risk of advanced prostate cancer

BACKGROUND: In a recent randomized intervention trial, the risk of prostate cancer for men receiving a daily supplement of 200 microg selenium was one third of that for men receiving placebo. By use of a nested case-control design within a prospective study, i.e., the Health Professionals Follow-Up Study, we investigated the association between risk of prostate cancer and prediagnostic level of selenium in toenails, a measure of long-term selenium intake. METHODS: In 1986, 51,529 male health professionals aged 40-75 years responded to a mailed questionnaire to form the prospective study. In 1987, 33,737 cohort members provided toenail clippings. In 1988, 1990, 1992, and 1994, follow-up questionnaires were mailed. From 1989 through 1994, 181 new cases of advanced prostate cancer were reported. Case and control subjects were matched by age, smoking status, and month of toenail return. Selenium levels were determined by neutron activation. All P values are two-sided. RESULTS: The selenium level in toenails varied substantially among men, with quintile medians ranging from 0.66 to 1.14 microg/g for control subjects. When matched case-control data were analyzed, higher selenium levels were associated with a reduced risk of advanced prostate cancer (odds ratio [OR] for comparison of highest to lowest quintile = 0.49; 95% confidence interval [CI] = 0.25-0.96; P for trend = .11). After additionally controlling for family history of prostate cancer, body mass index, calcium intake, lycopene intake, saturated fat intake, vasectomy, and geographical region, the OR was 0.35 (95% CI = 0.16-0.78; P for trend = .03). CONCLUSIONS: Our results support earlier findings that higher selenium intakes may reduce the risk of prostate cancer. Further prospective studies and randomized trials of this relationship should be conducted.     

Pulmonary arterial impedance analysis by the use of the oscillated assist flow

Pulmonary arterial impedance is an important and interesting characteristic that can be used to evaluate the physiological properties of the pulmonary vessel. However, power spectrum analysis of the pulmonary artery pressure and flow pattern have suggested that peak power in the relatively high frequency range (> 10 Hz) is significantly low; thus, we cannot analyze the vessel properties in the high frequency range. In this study, we used the newly developed vibrating flow pump (VFP), which can generate oscillated blood flow with a relatively high frequency (10-50 Hz) for right heart bypass, to evaluate the pulmonary arterial impedance pattern in the high frequency range. Acute animal experiments of the right heart bypass from the right atrium to the pulmonary artery using 6 healthy adult goats were performed. The flow pattern and pressure of the pulmonary artery, electrocardiograms (ECGs), and arterial and right atrial pressures were continuously monitored during the experiments. Spectral analysis of the hemodynamic parameters using the fast Fourier transform (FFT) method was performed to evaluate the spectral properties. The coherence function, transfer function, and phase patterns were calculated to analyze the impedance pattern in the relatively high frequency area. Previously, various investigators had tried to analyze the impedance patterns of the pulmonary artery; however, they could not analyze the impedance patterns over 10 Hz because the spectral patterns of the pulmonary flow do not have high power at high frequencies. These physiological analyses may be useful in designing the optimal pulmonary circulation.     

Scalable architecture for word HMM-based speech recognition and VLSI implementation in complete system

This paper describes a scalable architecture for real-time speech recognizers based on word hidden Markov models (HMMs) that provide high recognition accuracy for word recognition tasks. However, the size of their recognition vocabulary is small because its extremely high computational costs cause long processing times. To achieve high-speed operations, we developed a VLSI system that has a scalable architecture. The architecture effectively uses parallel computations on the word HMM structure. It can reduce processing time and/or extend the word vocabulary. To explore the practicality of our architecture, we designed and evaluated a complete system recognizer, including speech analysis and noise robustness parts, on a 0.18-/spl mu/m CMOS standard cell library and field-programmable gate array. In the CMOS standard-cell implementation, the total processing time is 56.9 /spl mu/s/word at an operating frequency of 80 MHz in a single system. The recognizer gives a real-time response using an 800-word vocabulary.