An error calculation method for finite element analysis in large displacements

This article describes an error measurement and mesh optimization method for finite elements in non-linear geometry problems. The error calculation is adapted from a method developed by Ladeveze, based on constructing a local statically admissible stress field. The particular difficulty in non-linear geometry lies in choosing a configuration on which the fields is defined. We propose here the lagrangian or reference configuration. The error is then defined as the value in elastic energy of the difference between the two stresses. The optimization used is the type h version. © 1997 John Wiley & Sons, Ltd.     

Control and manipulation of entanglement between two coupled qubits by fast pulses

We have investigated the analytical and numerical dynamics of entanglement for two qubits that interact with each other via Heisenberg XXX-type interaction and subject to local time-specific external kick and Gaussian pulse-type magnetic fields in $x$ – $y$ plane. The qubits have been assumed to be initially prepared in different pure separable and maximally entangled states and the effect of the strength and the direction of external fast pulses on concurrence has been investigated. The carefully designed kick or pulse sequences are found to enable one to obtain constant long-lasting entanglement with desired magnitude. Moreover, the time ordering effects are found to be important in the creation and manipulation of entanglement by external fields.     

Electrical and optical study of Cu(In, Ga)Se2 co-evaporated thin films

Co-evaporation technique from three sources was used to prepare Cu(In, Ga)Se₂ polycrystalline thin films for photovoltaic conversion. Their conductivity was studied in the range 20–300 K. The grain boundary scattering mechanism is mainly responsible for the diffusion process in the latter materials. In the low temperature region, we interpret the data in terms of Mott law and the analysis is very consistent with the variable range hopping. However, thermoionic emission is predominant at high temperatures. When the conductivity deviates from the classical grain boundary conduction models, inhomogeneity is then considered and parameters such as the standard deviation and the mean potential barrier height are derived. Transmittance measurements yielded band gap values of 1.07 and 1.64 eV for CuInSe₂ and CuGaSe₂, respectively.     

Effect of the Inclination of Baffles on the Power Consumption and Fluid Flows in a Vessel Stirred by a Rushton Turbine

The role of baffles in mechanically stirred tanks is to promote the stability of power drawn by the impeller and to avoid the fluid swirling, thus enhancing mixing. The present paper numerically investigates the baffles effects in a vessel stirred by a Rushton turbine. The geometric factor of interest is the baffle inclination which is varying between 25°, 32.5°, 45°, 70° and 90° at different impeller rotational speeds. The impeller rotational direction has also been varied. The vortex size and power consumption were evaluated for each geometrical configuration. It was found that the best configuration is the baffle inclination by α = 70° at a negative angular velocity.     

Non linear modeling of three-dimensional reinforced and fiber concrete structures

Under the effect of the ascending loading, the behavior of reinforced concrete structures is rather non linear. Research in industry and science aims to extend forward the use of non-linear calculation of fiber concrete for structural parts such as columns, veils and pious, as the fiber concrete is more ductile behavior then the classical concrete behavior. The formulation of the element has been established for modeling the nonlinear behavior of elastic structures in three dimensions, based on the displacement method. For the behavior of concrete and fiber concrete compressive and tensile strength (stress-strain) the uniaxial formulation is used. For steel bi-linear relationship is used. The approach is based on the discretization of the cross section trapezoidal tables. Forming the stiffness matrix of the section, the integral of the surface is calculated as the sum of the integrals on each of the cutting trapezoids. To integrate on the trapeze we have adopted the type of Simpson integration scheme.     

Liquefaction hazard mapping in the city of Boumerdès,Northern Algeria

The city of Boumerdès, located in Northern Algeria, was badly affected during the May 21, 2003 Zemmouri (Mw = 6.8) earthquake where extensive liquefaction has been reported. The aim of this paper is to assess and to map the liquefaction potential for Boumerdès. We collected and used data from 154 boreholes, 10 down-hole tests, 56 standard penetrations tests (SPT), and inventory of 35 water level points. This data has been analyzed in the framework of geographical information systems (GIS). We assessed the liquefaction potential index (LPI) by considering a seismic hazard scenario corresponding to a_max = 0.48 g calculated, using a probabilistic approach, for a return period of 500 years. LPI values have been correlated to compile the liquefaction hazard map that indicates the quantitative characteristics of the liquefiable layers and the induced disruption probability area. Results show that the main part of the city of Boumerdès belongs to a low liquefaction potential area except for a narrow corridor along the Corso waterway, where the liquefaction potential is moderate to high. The obtained results are compatible with the geological, geotechnical and hydrogeological susceptibility to liquefaction of the area. The results also show a good agreement with the observations made after the May 21, 2003 Zemmouri earthquake. The obtained liquefaction hazard maps may serve as useful tools for land management and planning in the city of Boumerdès and as an example of liquefaction hazard assessment that may be applied in other populated cities in northern Algeria’s seismic prone areas.     

Oscillatory combustion of propene during in situ mechanical activation of solid catalysts

Mechanochemical activation of solids can lead to a strong increase in their activity as catalysts in heterogeneously catalyzed reactions. In the following, we report on the effects of solid catalyst activation during ball milling that lead to oscillatory behavior in CO and CO₂ formation during propene oxidation. The oscillations arise under in situ ball milling conditions over chromium(III) oxide (Cr₂O₃) and cerium(IV) oxide (CeO₂), respectively. The experiments were conducted under continuous gas flow at ambient pressure and temperature, using both a modified steel and a tungsten carbide milling vessel. Abrasion of particles from the steel milling vessel could be eliminated as the sole cause for the oscillations through substitution by a tungsten carbide milling vessel. The intensity and frequency of oscillations are shown to be dependent on the propene-to-oxygen ratio, the milling frequency, milling ball size and metal oxide used. Overall, Cr₂O₃ shows higher activity for oscillatory propene combustion under in situ mechanical activation than CeO₂.     

An Overview of the Approaches for Automotive Safety Integrity Levels Allocation

Journal of Failure Analysis and Prevention - ISO 26262, titled Road Vehicles–Functional Safety, is the new automotive functional safety standard for passenger vehicle industry. In order to...     

On the stochastic timed Pétri nets model and its application to the DQDB protocol

The goal of this paper is twofold : at first, to present the stochastic timed Pétri nets model by emphasizing its ability to express the main characteristics of real time distributed systems (parallelism, synchronization by message exchange, time attributes and in particular time constraints) and to allow both qualitative and quantitative analysis (concept of randomized states graph); second, to show a modeling methodology based on this model that allows a rigorous modeling of theDqdb protocol (Qa access, bwb mechanism role,Pa access influence). A new contribution to theQa mechanism has been done (1).