Possibility of sewage and combined sewer overflow reuse with biological aerated filters.

The secondary effluent from municipal plants in Korea generally represents higher BOD with lower SS. Therefore, more soluble forms of organics and NH4-N need to be removed to improve its effluent for reuse. In this study reuse possibility of secondary effluent and CSO (combined sewer overflow) using BAF (biological aerated filter) was evaluated. The tertiary application with 1.2 h EBCT, SS, BOD and COD showed stable concentrations less than 1.3, 1.3 and 6.2 mg/L, respectively. Nitrogen could be nitrified even at 7 degrees suggesting BAF can be used for a water reuse method as well as an effective add-on facility in cold regions. However, BAF was not stable with CSO application at increased flow rates suggesting CSO must be equalised prior to application. Disinfection was necessary even during normal weather conditions.     

A new resource allocation scheme based on a PSNR criterion forwireless video transmission to stationary receivers over Gaussianchannels

A new resource allocation scheme is proposed for video service over a Gaussian channel. For video quality rating, we introduce a suitable metric: the average peak signal-to-noise ratio (PSNR) or the average channel-induced PSNR degradation. Then, we model the end-to-end distortion considering the error propagation effect caused by motion compensation. On the basis of this model, we propose an efficient resource allocation scheme for real video service. Unlike conventional schemes, the new scheme satisfies the PSNR requirement of each video user by adjusting the bit-error rate level with the changes of image characteristics. Simulation results show that the proposed scheme utilizes the bandwidth more efficiently than conventional schemes     

Noise bandwidth suppression for low noise readout circuit

A new noise reduction circuit that suppresses noise bandwidth of the output stage is proposed for the readout circuit of an infrared detector operating at a high pixel rate. Using this circuit, it is found that the rms noise voltage of the output stage is effectively reduced from 87 to 52 μV at a pixel rate of 10 pixel/μs     

Simulation and design methodology for a 50-Gb/s multiplexer/demultiplexer package

A 50 Gb/s package for SiGe BiCMOS 4:1 multiplexer and 1:4 demultiplexer targeting SONET OC-768 serial communication systems is introduced in this work. The package was designed to facilitate bit-error-rate tests and constructed with high-speed coaxial connectors, transmission lines on ceramic substrate, ribbon bonds for chip-to-package interconnects, and a metal composite housing. Numerical simulations were conducted to guide the package design, and both small signal measurements and operational tests were performed thereafter to verify the design and modeling concepts. To keep the model structure under the existing computing capability, the simulation was segmented into three sections - coaxial connector to transmission line, transmission line alone, and transmission line to ribbon bond, and then the results were assembled to predict the performance of the entire package. The package was operated up to 50 Gb/s with low degradation to input digital waveforms and free of error.     

Phase stability of ternary blends

The phase behavior of ternary blends of tetramethyl polycarbonate (TMPC), polycarbonate (PC), and styrenic polymers has been examined by experiment and analyzed in terms of thermodynamic theories. The phase boundaries were predicted using both the modified Flory-Huggins theory and the lattice fluid theory. The boundaries predicted using the lattice fluid theory agree best with the experimental results. The experimental phase behavior of ternary blends was compared with binary blends having exactly the same chemical components and compositions except that the TMPC and PC units were present in the form of a copolycarbonate in the binary. The miscible region of these ternary blends is much narrower than that of the corresponding binary blends, even though the entropic and energetic terms of such ternary blends are more favorable than those of the binary blends. It is shown that a negative value of noncombinatorial free energy in multicomponent systems is not a sufficient condition for miscibility, because of asymmetries of mer-mer interactions. A comparison of the stability conditions for these binary and ternary blends shows that increasing the degrees of freedom tends to destabilize the mixture.     

Droplet de-entrainment by inertial impaction on vertical rods in an air-droplet mixture flow

We experimentally investigate the de-entrainment of droplets by inertial impaction on an array of vertical rods in an air-droplet mixture flow. The de-entrainment efficiencies are measured for a single rod, for a single row of rods, and for a multi-row of rods. We investigate the effects of the droplet mass flux (0.5–5.4 kg/m² s), the droplet Weber number (3000–8000), the air velocity (0–6 m/s), the rod geometry, and the surface roughness on the de-entrainment, and the rod diameter-to-pitch ratio effect on the de-entrainment. The results for a single rod show that the de-entrainment efficiency decreases slightly as the droplet mass flux increases; however, in our experimental ranges, there is negligible dependence on the droplet Weber number, the air velocity, and the surface roughness. The rod geometry affects the de-entrainment efficiency. The results for a single row of rods show that the existence of neighboring rods promotes de-entrainment due to droplet splashing, and we develop a correlation to show the effect of diameter-to-pitch ratio on the de-entrainment. Using information on the de-entrainment efficiencies of a single rod and those of a single row of rods, we propose a correlation that predicts the de-entrainment efficiency for a multi-row of rods with a staggered array. The RMS errors of the correlation from the de-entrainment efficiencies experimentally obtained are within 13.5%.