Improvements of spreading codes utilisation efficiency forintegrated multimedia services in CDMA network

A wireless MAC protocol for the CDMA network is proposed which provides the various bit rates required to support the integrated multimedia services. The proposed method improves the spreading codes utilisation efficiency by sharing limited spreading codes among all mobile terminals     

Plasma chemistries for dry etching of NiFe and NiFeCo

Plasma chemistries based on chlorine, bromine, or iodine have been investigated for inductively coupled plasma etching of NiFe and NiFeCo. There is clear evidence of a chemically enhanced etch mechanism with both Cl₂- and I₂- based mixtures, with no enhancement present for Br₂ chemistries. Etch yields are typically low (≤0.25), emphasizing the need for high ion fluxes in order to achieve practical material removal rates.     

A transport theory of pulse propagation in a strongly forwardscattering random medium

The scalar time-dependent equation of radiative transfer is used to develop a theory of pulse propagation in a discrete random medium whose scatter function (phase function) consists of a strong, narrow forward lobe superimposed over an isotropic background. The situation analyzed is that of a periodic sequence of plane-wave pulses, incident from an air half-space, that impinges normally upon the planar boundary surface of a random medium half-space; the medium consists of a random distribution of particles that scatter (and absorb) radiation in accordance with the aforementioned phase function. After splitting the specific intensity into the reduced incident and diffuse intensities, the solution of the transport equation in the random medium half-space is obtained by expanding the angular dependence of both the scatter function and the diffuse intensity in terms of Legendre polynomials, and by using a point matching procedure to satisfy the boundary condition that the forward travelling diffuse intensity be zero at the interface. Curves of received power show that, at small penetration depths, the coherent (reduced incident) intensity dominates, whereas at large depths, the incoherent (diffuse) intensity is the strongest and causes the pulses to broaden and distort. The motivation for this study was to complement a test series, on mm-wave pulse propagation in vegetation, by a theory that provides understanding of overall trends and assistance in the interpretation of measured results. In the mm-wave region, all scatter objects in a forest have large dimensions compared to a wavelength and, therefore, produce strong forward scattering and a phase function of the type assumed in this paper     

Operation of a nonlinear optical loop mirror with orthogonally polarized waves in nonpolarization-preserving, single-mode fiber

We demonstrate stable operation of a NOLM using orthogonally polarized control and signal beams in nonpolarization-preserving, single-mode fiber. The NOLM can transcribe data from an optically incoherent input at one wavelength to a coherent output over a range of wavelengths. Operation of the NOLM without tuning for the input bit rate is possible over a range of bit rates from less than 1 Gb/s to more than 50 Gb/s.     

Lycopodium Spores: A Naturally Manufactured,Superrobust Biomaterial for Drug Delivery

Herein, the exploration of natural plant‐based “spores” for the encapsulation of macromolecules as a drug delivery platform is reported. Benefits of encapsulation with natural “spores” include highly uniform size distribution and materials encapsulation by relatively economical and simple versatile methods. The natural spores possess unique micromeritic properties and an inner cavity for significant macromolecule loading with retention of therapeutic spore constituents. In addition, these natural spores can be used as advanced materials to encapsulate a wide variety of pharmaceutical drugs, chemicals, cosmetics, and food supplements. Here, for the first time a strategy to utilize natural spores as advanced materials is developed to encapsulate macromolecules by three different microencapsulation techniques including passive, compression, and vacuum loading. The natural spore formulations developed by these techniques are extensively characterized with respect to size uniformity, shape, encapsulation efficiency, and localization of macromolecules in the spores. In vitro release profiles of developed spore formulations in simulated gastric and intestinal fluids have also been studied, and alginate coatings to tune the release profile using vacuum‐loaded spores have been explored. These results provide the basis for further exploration into the encapsulation of a wide range of therapeutic molecules in natural plant spores.     

Dynamic Oscillation via Negative Differential Resistance in Type III Junction Organic/Two-Dimensional and Oxide/Two-Dimensional Transition Metal Dichalcogenide Diodes

Among many of 2D semiconductor-based devices, type III PN junction diodes are given special attentions due to their unique function, negative differential resistance (NDR). However, it has been found uneasy to achieve well-matched type III PN junctions from 2D–2D van der Waals heterojunctions. Here, the authors present other alternatives of type III heterojunctions, using 2D p-MoTe₂/organic n-type dipyrazino[2,3-f:2′,3′-h]quinoxaline-2,3,6,7,10,11-hexacarbonitrile (HAT-CN) and 2D p-WSe₂/n-MoO_x systems. Those junction diodes appear to well-demonstrate static and dynamic NDR behavior via resonant tunneling and electron–hole recombination. Extended to an inverter circuit, p-MoTe₂/n-HAT-CN diode enables multilevel inverter characteristics as monolithically integrated with p-MoTe₂ channel field effect transistor. The same NDR diode shows dynamic LC oscillation behavior under a constant DC voltage, connected to an external inductor. From p-WSe₂/n-MoO_x oxide diode, similar NDR behavior to those of p-MoTe₂/n-HAT-CN is again observed along with LC oscillations. The authors attribute these visible oscillation results to high peak-to-valley current ratios of their organic or oxide/2D heterojunction diodes.     

Progressive NO2 Sensors with Rapid Alarm and Persistent Memory-Type Responses for Wide-Range Sensing Using Antimony Triselenide Nanoflakes

Antimony triselenide (Sb₂Se₃) nanoflake-based nitrogen dioxide (NO₂) sensors exhibit a progressive bifunctional gas-sensing performance, with a rapid alarm for hazardous highly concentrated gases, and an advanced memory-type function for low-concentration (<1 ppm) monitoring repeated under potentially fatal exposure. Rectangular and cuboid shaped Sb₂Se₃ nanoflakes, comprising van der Waals planes with large surface areas and covalent bond planes with small areas, can rapidly detect a wide range of NO₂ gas concentrations from 0.1 to 100 ppm. These Sb₂Se₃ nanoflakes are found to be suitable for physisorption-based gas sensing owing to their anisotropic quasi-2D crystal structure with extremely enlarged van der Waals planes, where they are humidity-insensitive and consequently exhibit an extremely stable baseline current. The Sb₂Se₃ nanoflake sensor exhibits a room-temperature/low-voltage operation, which is noticeable owing to its low energy consumption and rapid response even under a NO₂ gas flow of only 1 ppm. As a result, the Sb₂Se₃ nanoflake sensor is suitable for the development of a rapid alarm system. Furthermore, the persistent gas-sensing conductivity of the sensor with a slow decaying current can enable the development of a progressive memory-type sensor that retains the previous signal under irregular gas injection at low concentrations.     

Ultra fast symmetry and SIMD-based projection-backprojection (SSP) algorithm for 3-D PET image reconstruction

Remarkable progress in positron emission tomography (PET) development has occurred in recent years, in hardware, software, and computer implementation of image reconstruction. Recent development in PET scanners such as the high-resolution research tomograph (HRRT) developed by CTI (now Siemens) represents such a case and is capable of greatly enhanced resolution as well as sensitivity. In these PET scanners, the amount of coincidence line data collected contains more than 4.5 x 10(9) coincidence lines of response generated by as many nuclear detectors as 120 000. This formidable amount of data and the reconstruction of this data set pose a real problem in HRRT and have also been of the major bottle neck in further developments of high resolution PET scanners as well as their applications. In these classes of PET scanners, therefore, obtaining one set of reconstructed images often requires many hours of image reconstruction. For example, in HRRT with full data collection in a normal brain scan (using SPAN 3), the image reconstruction time is close to 80 min, making it practically impossible to attempt any list-mode-based dynamic imaging since the image reconstruction time would take many days (as much as 43 h or more for 32-frame dynamic image reconstruction). To remedy this data-handling problem in image reconstruction, we developed a new algorithm based on the symmetry properties of the projection and backprojection processes, especially in the 3-D OSEM algorithm where multiples of projection and back-projection are required. In addition, the single-instruction multiple-data (SIMD) technique also allowed us to successfully incorporate the symmetry properties mentioned above, thereby effectively reducing the total image reconstruction time to a few minutes. We refer to this technique as the symmetry and SIMD-based projection-backprojection (SSP) technique or algorithm and the details of the technique will be discussed and an example of the application of the technique to the HRRT's OSEM algorithm will be presented as a demonstration.     

The Fabrication and Characterization of Single‐Component Polymeric White‐Light‐Emitting Diodes

By using Ni⁰‐mediated polymerization, we have systematically synthesized a series of fluorene‐based copolymers composed of blue‐, green‐, and red‐light‐emitting comonomers with a view to producing polymers with white‐light emission. 2,7‐Dibromo‐9,9‐dihexylfluorene, {4‐(2‐[2,5‐dibromo‐4‐{2‐(4‐diphenylamino‐phenyl)‐vinyl}‐phenyl]‐vinyl)‐phenyl}‐diphenylamine (DTPA), and 2‐{2‐(2‐[4‐{bis(4‐bromo‐phenyl)amino}‐phenyl]‐vinyl)‐6‐tert‐butyl‐pyran‐4‐ylidene}‐malononitrile (TPDCM) were used as the blue‐, green‐, and red‐light‐emitting comonomers, respectively. It was found that the emission spectra of the resulting copolymers could easily be tuned by varying their DTPA and TPDCM content. Thus with the appropriate red/green/blue (RGB) unit ratio, we were able to obtain white‐light emission from these copolymers. A white‐light‐emitting diode using the polyfluorene copolymer containing 3 % green‐emitting DTPA and 2 % red‐emitting TPDCM (PG3R2) with a structure of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonic acid)/PG3R2/Ca/Al was found to exhibit a maximum brightness of 820 cd m^–2 at 11 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.33,0.35), which are close to the standard CIE coordinates for white‐light emission (0.33,0.33).     

Texture investigation of copper interconnects with a different line width

To understand the effect of line width on textural and microstructural evolution of Cu damascene interconnect, three Cu interconnects samples with different line widths are investigated. According to x-ray diffraction (XRD) results, the (111) texture is developed in all investigated lines. Scattered {111}〈112〉 and {111}〈110〉 texture components are present in 0.18-μm-width interconnect lines, and the {111}〈110〉 texture was developed in 2-μm-width interconnect lines. The directional changes of the (111) plane orientation with increased line width were investigated by XRD. In addition, microstructure and grain-boundary character distribution (GBCD) of Cu interconnect were measured using electron backscattered diffraction (EBSD) techniques. This measurement demonstrated that a bamboo-like microstructure is developed in the narrow line, and a polygranular structure is developed in the wider line. The fraction of ∑3 boundaries is increased as the line width increases but is decreased in the blanket film. A new interpretation of textural evolution in damascene interconnect lines after annealing is suggested, based on the state of stress and growth mechanisms of Cu deposits.