Stability of SiN<Subscript>X</Subscript>/SiN<Subscript>X</Subscript> double stack antireflection coating for single crystalline silicon solar cells

Double stack antireflection coatings have significant advantages over single-layer antireflection coatings due to their broad-range coverage of the solar spectrum. A solar cell with 60-nm/20-nm SiN_X:H double stack coatings has 17.8% efficiency, while that with a 80-nm SiN_X:H single coating has 17.2% efficiency. The improvement of the efficiency is due to the effect of better passivation and better antireflection of the double stack antireflection coating. It is important that SiN_X:H films have strong resistance against stress factors since they are used as antireflective coating for solar cells. However, the tolerance of SiN_X:H films to external stresses has never been studied. In this paper, the stability of SiN_X:H films prepared by a plasma-enhanced chemical vapor deposition system is studied. The stability tests are conducted using various forms of stress, such as prolonged thermal cycle, humidity, and UV exposure. The heat and damp test was conducted for 100 h, maintaining humidity at 85% and applying thermal cycles of rapidly changing temperatures from -20°C to 85°C over 5 h. UV exposure was conducted for 50 h using a 180-W UV lamp. This confirmed that the double stack antireflection coating is stable against external stress.     

Microstructure and properties of flame sprayed tungsten carbide coatings

This article reports on feasibility experiments carried out with oxy-acetylene spray system with various oxygen to fuel ratios using two different tungsten carbide powders and powder feeding methods, to evaluate the newly developed fused WC, synthesised by transferred arc thermal plasma method. Transferred arc thermal plasma method is more economical and less energy intensive than the conventional arc method and results in a fused carbide powder with higher hardness. The microstructure and phase composition of powders and coatings were analysed by optical and scanning electron microscopy, energy dispersive spectroscopy and X-ray diffraction. Carbon content of the powders and coatings were determined to study the decarburisation of the material during spraying process. Coatings were also characterised by their hardness and abrasive wear. The effects of metallurgical transformation and phase content are related to wear performance. The results demonstrate that the powders exhibit various degree of phase transformation during the spray process depending on the type of powder, powder feeding and spray parameters. The carbon loss during the spray process in excess of 45% resulted in reduced hardness and wear resistance of the coatings. Coatings with high amount of WC and W₂C along with FeW₃C showed higher wear resistance. Thus, coatings of high wear resistance can be produced using fused tungsten carbide powder with WC and W₂C phases, which can be economically synthesised by thermal plasma transferred arc method.     

Classification of Hydrogels Based on Their Source: A Review and Application in Stem Cell Regulation

Stem cells are recognized by their self-renewal ability and can give rise to specialized progeny. Hydrogels are an established class of biomaterials with the ability to control stem cell fate via mechanotransduction. They can mimic various physiological conditions to influence the fate of stem cells and are an ideal platform to support stem cell regulation. This review article provides a summary of recent advances in the application of different classes of hydrogels based on their source (e.g., natural, synthetic, or hybrid). This classification is important because the chemistry of substrate affects stem cell differentiation and proliferation. Natural and synthetic hydrogels have been widely used in stem cell regulation. Nevertheless, they have limitations that necessitate a new class of material. Hybrid hydrogels obtained by manipulation of the natural and synthetic ones can potentially overcome these limitations and shape the future of research in application of hydrogels in stem cell regulation.     

Studies on Hg(II) ion retention properties of cross-linked graft copolymer of acrylic acid and its analytical application

The effects of different parameters such as time, concentration, pH and temperature, on metal ion retention properties of the polymer have been investigated. Metal ion adsorption kinetics, isotherms and thermodynamics have been studied. A plausible mechanism for mercury ion retention has been suggested. Mercuric ion has been isolated quantitatively from various synthetic mixture containing metal ions (Ni²⁺, Cd²⁺, Pb²⁺ and Zn²⁺).     

Synthesis,structure, CO oxidation,and H2 production activities of CaCu3−xMnxTi4−xMnxO12 (x = 0, 0.5, and 1.0)

Synthesis of nanocrystalline pristine and Mn-doped calcium copper titanate quadruple perovskites, CaCu_3?xMn_xTi_4?xMn_xO₁₂ (x = 0, 0.5, and 1.0) by modified citrate solution combustion method has been reported. Powder X-ray diffraction patterns attest the phase purity of the perovskite materials. Average particle sizes of all the materials obtained from the Scherrer's formula are in the range of 55–70 nm. The specific surface areas for all the perovskites obtained from BET isotherms are found to be low as expected for the condensed oxide systems and fall in the range of 13–17 m² g^?1. Transmission electron microscopy studies show a reduction in particle size of CaCu₃Ti₄O₁₂ with increase in Mn doping. Ca and Ti are present in +2 and +4 oxidation states in all the materials as demonstrated by X-ray photoelectron spectroscopy analyses. Cu²⁺ gets reduced in CaCu₃Ti₄O₁₂ with higher Mn content. Mn is observed to be present only in +3 oxidation state. All the materials have been examined to be active in CO oxidation as well as H₂ production from methanol steam reforming. CaCu₃Ti₄O₁₂ with ~14 at.% Mn is found to show best catalytic activities among these materials. A comprehensive analysis of the catalytic activities of these perovskites toward CO oxidation and H₂ production from MSR reveal the cooperative activity of copper-manganese in the doped perovskites and it is more effective at lower manganese content.     

Sustaining Urban Water Supplies in India: Increasing Role of Large Reservoirs

Urban water demand is rapidly growing in India due to high growth in urban population and rapid industrialization. Meeting this demand is a big challenge for the urban planners in India. Incidentally, the large urban areas are experiencing faster growth in population, and most of them are in arid and semi arid regions, which are naturally water-scarce. As a result, water supplies from local water resources including aquifers are falling far short of the high and concentrated demands in most urban areas. Under such situations, these large cities have to rely on distant large reservoirs. The analysis of 302 urban centers shows that cities with larger population size have much higher level of dependence on surface water sources. Also, greater the share of surface water in the city water supplies, higher was the level of per capita water supply. Multiple regression models are estimated for Class I cities and Class II towns in India. The results show that Population Elasticity of Water Supply (PEWS) change with time and space—for Class I cities it was 1.127 in 1988, whereas that with respect to 1999 population is 1.289. It also shows that Class I cities have better water supply (PEWS is 1.127 in 1988 and 1.289 in 1999) than Class II towns (PEWS is 0.396 in 1988 and 0.675 in 1999). Given the structure and pattern of urban population growth, economic conditions and water demands, large reservoirs will have a much bigger role in meeting urban water supply needs.     

Programmable memory in organic field-effect transistor based on lead phthalocyanine

A nonvolatile organic field-effect transistor (OFET) with a polymeric electret as gate insulator and spun cast film of lead phthalocyanine (PbPc) as semiconductor channel is reported. Hysteresis induced by gate–bias stress was exploited to study nonvolatile memory effects. The observation of the hysteresis and memory window is proposed to originate from charge storage in the polymeric electret. The on state retention time for the OFET memory device is more than 5 h and the device can reproduce continuous write–read–erase–read switching cycles.     

Elongation of (n−9) and (n−7)cis-monounsaturated and saturated fatty acids in seeds ofsinapis alba

Lipids in developing seeds ofSinapis alba contain appreciable proportions of (n−7)octadecenoic (vaccenic) acid besides its (n−9) isomer (oleic acid), whereas the constituent very long chain (>C₁₈) monounsaturated fatty acids of these lipids are overwhelmingly composed of the (n−9) isomers. Cotyledons of developingSinapis alba seed use [1-¹⁴C]acetate, [1-¹⁴C]malonate or [1,3-¹⁴C]malonyl-CoA for de novo synthesis of palmitic, stearic and oleic acids and for elongation of preformed oleic, vaccenic and stearic acids to their higher (n−9), (n−7) and saturated homologs, respectively. Moreover, elongation of preformed (n−7)palmitoleic acid to vaccenic acid is observed. Stepwise C₂-additions to preformed oleoyl-CoA by acetyl-CoA or malonyl-CoA yielding (n−9)icosenoyl-CoA, (n−9)docosenoyl-CoA and (n−9)tetracosenoyl-CoA are by far the most predominant reactions catalyzed by the elongase system, which seems to have a preference for oleoyl-CoA over vaccenoyl-CoA as the primer. The pattern of¹⁴C-labeling of the very long chain fatty acids formed from either acetate or malonate shows a close analogy in the mode of elongation of monounsaturated and saturated fatty acids.     

Modeling mineral phase change chemistry of groundwater in a rural-urban fringe

This research paper aims to determine the genetic origin of the chemical elements in groundwater. It deals with the results of physicochemical parameters, to evaluate the hydro-geochemistry of groundwater in rural-urban fringe of district Bareilly, India. Pre- and post-monsoon sampling has been carried out, which reveals inter-seasonal variability effect on the hydro-geochemical processes. Geochemical modeling especially computation of saturation index was undertaken using the WATEQ4F model. Majority of samples fall in the category of undersaturation, which further suggests that groundwater still has potential to dissolve more minerals. Chemical categorizations of groundwater samples were performed with the help of the Aquachem model. Grouping of groundwater on the Piper diagram reveals a common composition and origin. In most of the area, water facies is of Ca(2+)-HCO(3)(-) type in both the seasons. It also indicates that in pre-monsoon, ion exchange is the dominant process, whereas in post-monsoon, both ion exchanges as well as reverse ion exchanges are reported in the groundwater of the study area.