基于Jpcap的Webmail邮件还原技术

基于Smtp和Pop3的邮件还原技术已经日臻成熟,而由于主要Webmail邮件格式不同,Webmail邮件还原技术一直是难点。通过对主要Webmail的内容格式分析,针对不同网站的Webmail建立相应的还原模块,实现对主要Webmail的内容还原。实验结果验证了该技术的有效性。     

Phase Assemblages of Pr α-sialon Derived from SHS-ed Powders and TEM Study on the Nucleation of Pr α-sialon

The Pr α-sialon powders prepared by self-propagating high-temperature synthesis (SHS), consisting of 55 wt% Pr α-sialon and 45 wt% of β-sialon (abbreviated as α' and β'), were hot-pressed at 1800°C for 1 h. The results showed that Pr α' phase would transfer to β' with the appearance of JEM phase (Pr(Si_{6− z} Al _z )(N_{10− z} O _z )) after sintering, thus resulting in the increase of β' phase to 86 wt%. The addition of Y₂O₃ into SHS-ed Pr α' powders as the starting materials restrains the transformation of α' to β' and prevents the formation of JEM phase as well. The nucleation mechanism of Pr α' grain during hot-pressing was investigated in terms of transmission electron microscope and energy-dispersive spectrometer analysis. Two nucleation modes of Pr α' grains were found, i.e., nucleating on the undissolved Pr α' grains and on the nuclei of (Pr, Y) α' grains precipitated from liquid phase.     

Ink‐eliminated waste paper sludge flour‐filled polypropylene composites with different coupling agent treatments

Ink‐eliminated sludge flour (IESF), waste residue from the recycling treatments of waste paper, was utilized as a new kind of filler to reinforce polypropylene (PP) in this research work. Different coupling agents, including maleated anhydride grafted PP (MAPP), stearic acid (SA), and titanate (NDZ‐101), were used to increase the compatibility between IESF and PP. By using different measurements, the microstructure, morphology, thermal behaviors, and mechanical properties of the IESF/PP composites were investigated in detail. It was found that IESF, as a nucleation agent, not only induced the crystallization orientation of PP but also accelerate the crystallization rate of PP. Just as indicated in the experiments, the presence of IESF has shown the advantages of increasing the dimensional stability, the hardness and the flexural property, and the presence of coupling agents has a favorable effect on the improvement of dimensional stability. Moreover, the coupling agent has minor influence on the mechanical property, even causes some decrease in the impact strength. Among these three coupling agents, MAPP is found to be the best coupling agent for increasing the interfacial adhesion between IESF and PP, and the MAPP addition makes the PP composite possess the quickest crystallization rate and greatest tensile strength. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 513–520, 2003     

AgBiVMo oxide catalytic membrane for selective oxidation of propane to acrolein

A metal ions (Ag, Bi, V, Mo) modified sol–gel method was used to prepare a mesoporous Ag_0.01Bi_0.85V_0.54Mo_0.45O₄ catalytic membrane which was used in the selective oxidation of propane to acrolein. By optimizing the preparation parameters, a thin and perfect catalytically active membrane was successfully prepared. SEM results showed that the membrane thickness is 5 μm. XRD results revealed that Ag_0.01Bi_0.85V_0.54Mo_0.45O₄ with a Scheelite structure, which is catalytically active for the selective oxidation of propane to acrolein, was formed in the catalytic membrane only when AgBiVMoO concentrations were higher than 40%. Catalytic reaction results demonstrated that the selective oxidation of propane could be controlled to a certain degree, such as to acrolein, in the catalytic membrane reactor (CMR) compared to the fixed bed reactor (FBR). For example, a selectivity of 54.85% for acrolein in the liquid phase was obtained in the CMR, while only 8.31% was achieved in the FBR.     

Morphologies-Controlled Synthesis and Optical Properties of Bismuth Tungstate Nanocrystals by a Low-Temperature Molten Salt Method

Well-crystallized bismuth tungstate (Bi₂WO₆) powders with different morphologies were successfully synthesized via a low-temperature molten salt method. The powders were characterized by X-ray diffraction, transmission electron microscopy, and UV-Vis, respectively. It was found that the variation of morphology of the obtained Bi₂WO₆ powder mainly depends on the different reaction temperatures and the weight ratio of LiNO₃–NaNO₃ salt to precursor. In addition, the UV-Visible absorption spectra showed that the synthesized powders had strong light absorption properties not only in the ultraviolet light but also in the visible light region.     

甲缩醛空气氧化制甲醛催化剂的研制和工艺条件探讨

考察了铁钼催化剂对甲缩醛空气氧化制甲醛的催化性能。制备了多种不同钼铁比和第三、第四组分的催化剂,进行了活性评价和筛选,探讨了适宜的工艺条件范围。对于所选定的催化剂(钼铁比为1.82～1.88;铬铁比为0.1～0.38)在适宜的工艺条件(甲缩醛进料浓度4.5～5.5％;甲缩醛和氧气进料比1:2.0±0.2;空速12000～22000h~(-1);热点温度370～390℃)下,甲醛收率可达85％左右。     

合成气中氨含量测定方法的改进

用快速测定仪测定气体中的氨含量，采气量为50ml，可准确测出高含量氨体积百分比含量为80%-100%和低含量氨体积百分比含量为1%-20%的样气，该仪器结构简单，易于制造，测定过程简单，结果准确，一目了然。     

PTC型BaTiO3陶瓷的孪晶和孪晶界

用透射电镜和高分辨电镜观察研究了PTC型BaTiO_3陶瓷的孪晶和孪晶界结构,并提出了可能的{111}孪晶及孪晶界的原子结构模型。结果表明,{111}孪晶形成氧八面体共面的共格倾斜孪晶界,在孪晶界处可能存在一定量的A空位且原子密度要低于孪晶体内。同时还发现两种其它特征的孪晶现象。     

云计算背景下软件企业创新的趋势

云计算是一种基于互联网的计算方式,通过这种方式,共享的软硬件资源和信息可以按需提供给计算机和其他设备,该技术是一种近些年来发展的新兴科技,同时在一定的程度之上遍布于软件企业的各个领域之中,引导着当前软件企业发展的方向.基于此,本文探讨了云计算背景之下软件企业创新的趋势.