Use of Shears with a “Rolling Cut”

This article examines the advantages and disadvantages of using guillotine shears with an inclined top blade for the cross-cutting of flat-rolled products on modern plate mills. It is shown that it is necessary to use shears of an improved design. After shears with a “rolling cut,” designed by the All-Russia Scientific Research, Planning, and Design Institute of Metallurgical Machinery (VNIImetmash), were installed in the line of the 2800 plate mill at the Ural Steel combine, the institute conducted studies to optimize the parameters of the cutting operation and developed recommendations for the shears operators on how to adjust the shears to obtain a quality cut edge on the plates.     

浆砌石坝爆破拆除及监测技术

在陕西宝鸡峡引水枢纽浆砌石大坝改建过程中 ,Ⅱ坝段的全部以及Ⅵ坝段的部分须用爆破方法拆除。为了避免爆破震动对相邻的和保留的浆砌石坝体的不利影响 ,利用伸缩缝和预先开挖的沟槽隔震 ,采用了浅孔爆破分层拆除的方法 ,实施微差爆破 ,严格控制最大一段药量。爆破震动监测和声波测试的结果表明 ,保留的浆砌石坝体没有受到损伤     

基于约束优化的联想记忆模型学习算法

本文提出了一种对称互连神经元网络的学习策略,利用全局约束优化方法确定连接权。优化过程采用了梯度下降技术。这种学习算法可以保证训练样本成为系统的稳定吸引子,并且具有优化意义上的最大吸引域。本文讨论了网络的存储容量,训练样本的渐近稳定性和吸引域大小。计算机实验结果说明了学习算法的优越性。     

Use of sensitivity functions in the problem of designing a multilayer heat shield

An approach is proposed for solving the problem of designing a multilayer heat shield with a prescribed structure from the restrictions on its temperature.Tanslated from Inzhenerno-Fizicheskii Zhurnal, Vol. 61, No. 6, pp. 1014–1018, December, 1991.     

弹簧钢棒线材质量投诉的分析研究

为分析研究某特钢厂用户投诉的原因及存在的问题，统计了其两年间的弹簧钢棒线材用户质量投诉，从缺陷类型及生产过程控制进行了分析，重点对多起断裂原因不明的投诉进行了深入的失效研究。结果表明，弹簧钢生产厂在设备工艺、过程控制和管理中存在很多不足，加上用户的使用工艺、材料的内外质量和规格等综合因素导致了材料的断裂失效。     

DLL23XA双侧向测井仪的研制

以往双侧向测井仪动态范围小，测量精度低，为此开发了DLL23XA双侧向测井仪。该仪器主要单元采用厚膜电路，稳定性、一致性好；深、浅屏流源采用可变功率控制，提高了仪器的动态范围。仪器采用3506P例进行数据传输，可方便地配接各种地面系统。     

Measurement of the Hardness of Thin Films

A method for evaluating the hardness of coatings with nanosize thickness is suggested. The method includes the determination of the hardness of the “coating-substrate” composition by indenting the coating and subsequent computation of the hardness with the use of the additivity rule. This requires determination of the thickness of the coating, of the hardness of the substrate, and of the indentation depth.     

基于米氏散射及夫朗和费衍射的FAM激光测粒仪

提出了综合运用夫朗和费衍射和米氏散射，即在大粒径范围内采用夫朗和费衍射理论，而在小粒径范围内采用米氏散射理论，来改善小粒径范围内的测量精度，保证激光测粒仪在整个粒径范围内的测量精度。     

Effects of passive tilt and submaximal exercise on spectral heart rate variability in ventricular fibrillation patients without significant structural heart disease

It has been shown that tilt and exercise elicit significant changes in autonomic activity in normal subjects and that submaximal exercise causes a greater reduction in heart rate variability (HRV) in animals susceptible to ventricular fibrillation (VF). Whether there is an abnormal HRV response to tilt and exercise in patients at risk of sudden cardiac death (SCD) remains unknown. Short-term HRV before and during passive tilt and exercise was studied in 12 survivors of out-of-hospital cardiac arrest with documented VF and compared with 12 age- and sex-matched normal controls. No patient had significant structural heart disease or left ventricular dysfunction. HRV was computed as total-frequency (TF, 0.01 to 1.00 Hz), low-frequency (LF, 0.04 to 0.15 Hz) and high-frequency (HF, 0.15 to 0.40 Hz) components. There was no significant difference between normal controls and SCD survivors in HRV before or during tilt or submaximal exercise testing. The HF component was significantly decreased during tilt compared with that in the supine position in both normal controls (5.85 +/- 0.61 vs 5.08 +/- 0.95 In(msec2), p = 0.005) and patients (5.58 +/- 1.49 versus 4.74 +/- 1.18 In(msec2), p = 0.003). There was again no significant change in the TF or LF components during tilt in either patients or controls. All frequency components were significantly decreased during submaximal exercise testing in both patients and controls. However, there was no significant difference in any of these tilt- and exercise-induced changes in HRV between normal controls and SCD survivors.(ABSTRACT TRUNCATED AT 250 WORDS)     

微机传真系统

本文介绍了集传真技术、通信技术、微型计算机技术于一体的微机传真系统，提出了微机传真系统在硬件接口及报表识别上的实现方法。