Effects of some factors on centrifugal casting of oxide ceramics

Conclusions It is shown that in technically suitable conditions for shaping blanks by centrifugal casting, the deposition of the particles occurs with a streamline schedule, and the coarse fractions are deposited during acceleration of the rotation of the mold. The main factor influencing the density of the finely dispersed blanks is the duration of rotation, and for systems containing coarse filler, centrifugal acceleration. Regulating the dimensions (wall thickness) of the blank is possible by altering the concentration of solid phase in the slip and the degree of filling of the mold with it.Translated from Ogneupory, No. 1, pp. 22–24, January, 1992.     

制氢尾气二氧化碳回收装置设计

对制氢尾气二氧化碳的回收装置进行了简捷设计，流程分析，并对换热装置的换热量和传热面积给出了算法和有关数据。     

Approximate Method for Optimization of the Geometric Structure of Polyatomic Systems

A compact method of calculation for solving a fundamental problem in structural chemistry — the problem of optimizing the geometric structure of molecular systems — is proposed. Solution of this problem will allow predicting a number of properties of polymer systems based on the existence of a structure—property correlation. It should be noted that the proposed method allows performing all calculations in analytical form.     

Effect of temperature on the corrosion of refractories in glass melts (Review)

Translated from Steklo i Keramika, No. 12, p. 12–14, December, 1991.     

Restricted proteolysis of legumin of broad beans: Effect on thermodynamic properties of aqueous solutions and interaction with ficoll

Thermodynamic properties of aqueous solutions of both native and modified legumin of broad beans (Vicia faba L.) have been examined. A restricted trypsin-induced proteolysis was used to modify protein structure. Evaluation of protein affinity to ficoll in aqueous solutions showed that modified protein possessed higher hydrophilicity. Thermodynamic properties of diluted solutions were used to predict the phase behaviour in concentrated systems containing protein and ficoll. At specific concentrations of native legumin, the system can separate in two phases, whereas in the case of modified protein the single-phase behaviour of the system was predicted for any concentrations of both components. The experimental data obtained in concentrated systems confirmed predictions of thermodynamic analysis of diluted solutions.     

Production of Asphalt from Activated Crude Oil Residues

Preparation is one method of increasing the efficiency of crude oil feedstock refining processes. In this stage, the feedstock can be activated by regulating the balance of intermolecular interaction forces within a crude oil disperse system by different methods: external fields (electric, magnetic); mechanical; using different kinds of additives, primarily those with surface–active properties.     

Photosensitive structures based on ZnIn<Subscript>2</Subscript>Se<Subscript>4</Subscript> single crystals

Photosensitive structures of surface-barrier and homojunction types have been fabricated for the first time on the basis of ZnIn₂Se₄ single crystals. The spectral dependence of the quantum efficiency of photoconversion has been studied and discussed. It is concluded that the structures are promising for commercial applications.     

图书馆网站设计的探讨

介绍了当今信息时代建设图书馆网站的重要性和作用 ,以及在网站设计评估中应着重注意的包括网站内容、页面设计及安全性能等三方面的问题 ,同时提出 ,图书馆网站建设中如何在这几方面进行改进和完善。     

磷酸盐激光玻璃非激活吸收系数测量研究

介绍了高功率激光放大器系统中磷酸盐激光玻璃的静态透过率测量。在正常运行条件下,4片长按布儒斯特角放置的国产N31钕玻璃片对1.054um的激光波长平均静态透过率为94.5%,介质的损耗系数为0.294%cm-1,平均非激活吸收系数为0.146%cm-1。在此基础上对片状放大器的增益系数的测量结果进行了修正,获得了5.25%cm-1的小信号增益系数。     

The Problem of Estimating the Uncertainty of the Fixed Point Temperature Due to the Presence of Impurities

The main problems in estimating the uncertainty due to the presence of impurities in the material: the absence in the documents of a unique definition of the quantity being measured – the fixed point temperature, the lack of agreed methods of realizing the fixed points and the insufficient justification of the equations used for the estimate, are analyzed. The results of a measurement of the melting point of gallium are presented, which differ in the conditions in which they were realized – with one and two liquid-solid interfaces and different solidification conditions, are presented. The reasons for the considerable difference between the values of the temperatures obtained in these experiments are discussed.